If I configure a crontab like below.12 3 12 4 4 cat /etc/passwd I know that the cat command will get executed at the configured time. But where will the output of that command go?If it is something like below, then out put will be routed to /tmp/file1.12 3 12 4 4 cat /etc/passwd > /tmp/file1
View 4 RepliesI am using Linux 64 bit Redhat Linux. I am trying to setup simple crontab as follow...1. Edited crontab file using crontab -e2. Listed the file once to verify it using crontab -l. This will display as.. 18 5 * * 2-3 ksh $HOME/testScript.sh > $HOME/testscript.out3. Logged in a root and restarted cron deamon using "/etc/init.d/crond restart"As per my understanding now my testScript should start running at 5:18 am Thuesday
View 3 Replies View Relatedwe know that /etc/passwd - is a replica of /etc/passwd file and acts as a backup in any damage done to /etc/passwd file..i have observed a strange thing in RHEL 5.4....for example... if /etc/passwd has 100 accounts.. then /etc/passwd - is having only 99 accounts....when i add 101 useraccount with "useradd" then /etc/passwd has 101 accounts and /etc/passwd is having the 100th account of /etc/passwd - ..when i delete /etc/passwd and recover it with /etc/passwd - from runlevel 1 the lastly created user is not having his account after recovery.. what is the solution? this is same case even with /etc/shadow and /etc/shadow -
View 2 Replies View Relatedis it possible disabling a crontab job without deleting the crontab description entry (by crontab -e)?I could also accept to change the entry itself. Now it's:0 0 * * 0-6 /home/me/cron/script.csh
View 4 Replies View RelatedWhat is the difference between the crontab located in /etc/crontab and the crontab that can be edited using crontab -e?
View 2 Replies View RelatedWell we all know that it holds passwords. But cat-ing it gives out nothing. Not even encrypted gibberish. So how exactly is a password stored in this? Is this like a device file or something?
View 4 Replies View RelatedI was doing some experiment about resource-accessing. By mistake, I executed this command,$ sudo mv /etc/passwd /etc/passwd.bakThen I could not execute any command with privilege(eg. sudo mv /etc/passwd.bak /etc/passwd). When I shut the system down, I could not boot it any more.
View 2 Replies View RelatedAll servers mentioned below run OpenSuSE, either 10 or 11.I am currently working on a few scripts that are meant to be used as part of a continuous integration setup. I am trying to keep these scripts reasonably secure, and so I have made sure that all the servers run these scripts only as a specific user (user1) that has permissions to basically nothing else. The problem I am currently running into is that I need to start and stop tomcat as user1 but this user doesn't have permissions to the tomcat rectory (only tomcat has execute permissions). I have a temporary workaround in place while I work on the scripts (I have an SSH key in place that allows me to SSH from user1o tomcat without a password and execute my commands that way) but it is not very secure. I have tried adding the following line to /etc/sudoers:
Code:
tomcat localhost = NOPASSWD: /opt/tomcat/bin/startup.sh, /opt/tomcat/bin/shutdown.sh
but it doesn't work as I expected it to. I tried a few different syntaxes for that line,
[code]...
I got a user account on a linux network. But when I look in the /etc/passwd file, I don't see my username there. Where would I find my username
View 3 Replies View RelatedUnfortunately i lost my passwd file...so who to recover that.
View 8 Replies View RelatedI'm running a small network of 20 PC's (slackware), I had previously used NIS and can't really be bothered with ldap it's a bit of hassle. I do not need a centralised database just a login auth system.On the server I make a folder called /sec and symlink passwd, group and shadow into it.I export this via nfs.On the workstation I create a folder /sec, move the passwd, group and shadow file into it and then symlink them back into the /etc folder.On bootup, the rc.local mounts server /sec over the top of workstation /sec. If it fails it falls back.I wasn't sure if I could just mount /sec on the workstation and then temporarily symlink group,passwd,shadow over the top of the /etc/shadow etc
View 4 Replies View RelatedI have a question about using crontab with /etc/crontab...
I had a cron job that I needed to run as root. At the time I thought that sticking it in /etc/crontab would be a good idea. However, I used the crontab command to edit /etc/crontab, which I guess is not standard procedure? Specifically, I configured /etc/crontab as my local user's crontab (i.e. sudo crontab /etc/crontab) then added my cron job as I would a local user crontab (i.e. sudo crontab -e).
Originally, my cron job looked like this:
30 * * * * root /my/batch/script &> /dev/null
After adding the new cron job I started seeing errors. Something to the effect of "can't find command root" or something similar. So I removed the 'root' user definition from the cron job and the job started running fine. However, because this is /etc/crontab, there are other system related cron jobs that have been defined to run under the root account (e.g. "17 * * * * root cd / && run-parts --report /etc/cron.hourly" runs as root, etc.). So these pre-existing system cron jobs, which up until now have been running smoothly, are now generating "can't find command root" errors. But I think that the system cron jobs _are_ successfully being run someplace because logrotate seems to be working.
So what I _think_ is happening is that /etc/crontab is being run twice: once as the system crontab, and once as my sudoed local user's crontab. When I run crontab -l I see nothing, but when I run sudo crontab -l I can see the contents of /etc/crontab. I am reluctant to delete my sudoed local user's crontab, because then in the process I would be deleting the system crontab, and I do not know how I should restore the system crontab's contents. (I am still not sure as to the most appropriate way to edit the system crontab).
How can I get out of this mess? I want /etc/crontab to go back to the way it was before--running _once_ as the system crontab. As for my new cron job, I'm willing to reconfigure it anywhere so long as I am still able to run it as root. Any ideas? (I am using Ubuntu 8.04 Server LTE)
I have installed an application manager(monitoring application) on my linux server. Now, i need to have backup schedule for my application. The application itself has executive file to backup database.But when i put this file in my crontab to schedule the backup program it wont run!50 09 * * * root /opt/ME/AppManager9/bin/BackupMysqlDB.sh
View 1 Replies View RelatedIs there a command for showing only the readable signs uit of /usr/bin/passwd?
View 1 Replies View RelatedI was looking around the files in /etc/ to see what they were and what they said, then I noticed there was two files called passwd, which confused me a lot for a second then I noticed one of them was actually passwd-.I compared them and they only differed by one line:
< games:36:35:added by portage for gemrb:/usr/games:/bin/bash, which was in passwd but not passwd-.Should these files both exist? If yes, why, what does having both do? If no, then its safe to say I can just delete passwd-
i am executing the passwd command on a solaris 10 OS and every time its aborting (as shown below). how to troubleshoot this..
root@osssvr-1 # passwd ftp
New Password:
Re-enter new Password:
Abort
What is the equivalent of Solaris's passwd command in Linux?
View 2 Replies View RelatedHow we can take username from the /etc/passwd which have UID more than or equal to 500.
View 3 Replies View RelatedI deleted root from passwd and shadow file.Can I crate a new root user?
View 1 Replies View RelatedRecently installed some application which screwed the default common-passwd file and has put some restrictions on the passwords which I could setThe present file looks like this
Code:
#password required pam_passwdqc.so min=disabled,8,8,8,8 passphrase=0 enforce=users
password required pam_passwdqc.so min=1,0,0,0,0 passphrase=0 enforce=none random=0
[code]...
How I can do a ftp connection putting the user and passwd, and I would do! Today, I need to know how can I do this, but in SFTP!
View 1 Replies View RelatedWhen I use ls -al to show files downloaded from internet,
-rw-rw-r-- 1 427 6011 7544 Jul 20 2006 INSTALL
-rw-rw-r-- 1 427 6011 4229 Dec 9 15:36 Makefile.am
-rw-rw-r-- 1 427 6011 27893 Dec 10 17:47 Makefile.in
I can see the owner and group ids are shown because there are no corresponding entries in /etc/passwd and /etc/group respectively. I don't know much about linux and dare not to edit these files, I wonder if somebody already knows whether linux would map the owner id of files coming from other computers to the account name in /etc/passwd and display them when necessary (for example, when using ls -al)?
I am bulding my own image based on 2.6.32 kernel, I wish to add a guest user:
In a script thats invoked by the makefile, I use 'useradd' command & this updates the shadow, passwd files under /etc on the host, is it possible to tell the command to create the shadow / password under some other folder on the host? may be /tmp?
when loggin as a normal user and search for a file passwd under /etc. i get few errors with permission denied.how to ignore this permission denied errors.
csh hostname 109 % find . -name passwd
find: ./lvm/backup: Permission denied
find: ./lvm/archive: Permission denied
[code]....
I was trying to write a crontab entry using "crontab -e"
Code:
0 0 * * * cp /var/log/httpd/domains/mydomain.net.log
/home/admin/logs/mydomain.net.log
crontab is giving me this error:
Code:
"/tmp/crontab.XXXXfMOnRS":2: bad minute
errors in crontab file, can't install.
I've tried a dozen different values for the minute, but it's still giving me the same error.
I want to run a crontab job but it isnt working. I am writing in the crontab file with crontab -e Then I am waiting time but it isnt working. code...
View 6 Replies View RelatedI setup a cron job to trigger a script that I wrote every morning at 12:00 AM, but it does not seem to be working.
This is how I edit the job using crontab -e
Why it isn't triggering at 12:00 am every night. If I run the script manually it works just fine so I know is not the script causing troubles.
I know crontab -e sets a cronjob in /var/spool/cron but how do I set a cronjob to run from /etc/crontab? Is there a command used for this or would I have to manually edit a certain file?
View 2 Replies View RelatedI want to set up a crontab so that from my machine {which is 192.168.0.99}whatever I create in a directory called "/information" {suppose some texts files}will be copied to 192.168.0.100 and 192.168.0.101's machine "/readinfo" directory at 5.30 pm. everyday."/readinfo" is directory which is accessible by all users on that machines {192.168.0.100 & 192.168.0.101}is this crontab right?30 5 * * * /bin/cp -rf /information/* 192.168.0.100:/readinfo30 5 * * * /bin/cp -rf /information/* 192.168.0.101:/readinfoI guess first these 100 and 101 machines should allow me {99} ssh connection without passowrd.
View 5 Replies View RelatedMy laptop's clock (Acer Extensa 5220) seems to be slow. I've corrected it 5 minutes forward last week and now have just corrected minute forward again. Is there a program [apart from time servers] to correct clock properly, for example, by shifting it a bit every hour? Is there already a program to put it to crontab or I should hack up a script? Or I should check more things?
I have found that HW clock is right, but system time is slow: about a second each 2.1 hours.
root@vi-notebook:~# dmesg | egrep 'clock|unstable'
[ 0.103785] Switching to clocksource tsc
[ 0.265274] Marking TSC unstable due to TSC halts in idle
[ 0.265514] Switching to clocksource acpi_pm
[ 1.321408] rtc_cmos 00:09: setting system clock to 2010-10-30 00:10:48 UTC (1288397448)
Is placing "hwlock --hctosys" to crontab a right thing?