how can i copy by script or command files with *.v suffix by "-p" option?
Example:
kuku.ggg
kuku.dd
kuku.v
kuku.vb
only if i try to copy kuku.v by default cp -p will done.
I have to transport a lot of files from one pc to another (both Linux). I would like to use scp for that, but scp only allows for transferring one file at a time. How can I do this?
I have No possibility to use rsync or any other protocol No possibility to use passphrase free certificates (but have a certificate with a passphrase) A list of files to transfer and a list with the destination path of the files on the other server The files are spread out over a lot of directories, and not all the files in the directories I want to copy If possible I would like to gzip and ungzip transparently to save bandwidth!
I'm trying to truncate a postfix Maildata directory for one of our users. I want to be able to move any files older than <n> days to a new location, but also copying the relevant directory structure. This should be doable in the one comman. I've used find to locate the files, and mv to move them, but I can't figure out how to build the directoryt structure on the fly in the new location.
This is what I have so far:
Code:
find /Maildata/editor -mtime +42 -type f -exec mv -v {} /EditorEmailOld/ ; > ~/editor.txt
Code:
cp -r aa123.h aa*.h
results in
Code:
cp: target `aa456.h' is not a directory
Yes I read man page cp (1p). There is something written there about it, I couldn't understand though.
I need to copy all subdirectories and files from one directory to another ever 5 minutes or so, with the old data automatically being overwritten with the new data. I'd also like this to run at startup. Is there any way this can be done? If so, what program would I need to schedule the automation and what is the command line I would need.
View 2 Replies View Relatediam trying to send sms using gnokii utility in linux firstly i did sudo apt-get install gnokii after that i got a gnokiirc.gz file in /usr/share/doc/gnokii/sample/gnokiirc.gz file here after that i did gunzip gnokiirc.gz then i transferred my file from the /usr/share/doc/gnokii/sample to home directory by using copy command as copying files to home is not allowed so i used sudo sudo cp gnokii /home after that i changed the port=/dev/ttyUSB2 and model=AT in the gnokiirc file in the home directory and then i wrote gnokii --identify
[Code]....
i followed as in the [URL] and [URL] and except this "Note that you will need read/write permissions on whatever serial port you specify in .gnokiirc."(iam confused what is my serial port is it ttyUSB2)
I am using the diff command with the -r option, to compare a large number of files and files in subdirectories. My main interest is to find out which files have been changed, and not what the actual changes are, and since a lot of files has been changed, it would be a lot easier to view the file names only. Is there and option for diff that might do this, or does there exist a similar tool/command that could do the job?
View 1 Replies View RelatedIs there a method at the command line to copy files from one location to another and retain the source files group and user?I'm migrating some MySQL files from one machine to another.I want to back-up the original files in the directory presently. They have owner:group of mysql, some have owner:group root:mysql and so on. To copy them under cli or Nautilus everything changes to root for I execute sudo cp or gksudo nautilus and copy via gui.
Since it is MySQL data I could simply do a dump of the database and restore it on the other machine. But there's about 20 db's and I want to do this via a copy for it will be faster - at least that is what I think.
I am using CentOS 5.3. output of "uname -a" Linux localhost.localdomain 2.6.18-92.el5 #1 SMP Tue Jun 10 18:49:47 EDT 2008 i686 i686 i386 GNU/Linux
My kernal version is kernel-2.6.18-92.el5
Whenver i try to copy files from my centos to pendrive ( 2gb, kingston datatraveller) my system is gettin hanged leaving no option then to reboot. i tried from the terminal also, and as a diffrent user also. but same results. sometimes i can copy files of small size. but when i go above 5 mb..system hangs..
I am trying to configure Fedora 11 Samba PDC with LDAP backend. All information on how to was obtained at http:[url].......The Howto is not complete. However, I have a real problem when configuring ldap.conf and slapd.conf as I will replace the domain acpng.org.pg with the examples. The problem is when entering the following:
URI ldap://127.0.0.1/
HOST linux-srv1.pqrst.org.nk
BASE dc=pqrst,dc=org # now here, do I put another dc=nk for the
I want to add suffix or prefix in all files (.txt , .avi . , .exe)from a folder
View 9 Replies View RelatedHow to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).
More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.
I'm looking for a way to copy files with a certain file extension over to another folder. For exampleSource Folder: /home/user/downloadsFile Type: *.epubDestination Folder: /home/user/epubs/The downloads folder has several folders that may go as deep as 2 or 3 levels.I tried this but it didn't seem to work (and I'm not really sure what to do to modify it to get it to work).Quote:find . -maxdepth 1 -type f -exec grep -q "pattern" '{}' ';' -exec cp '{}' /path/to/destination
View 4 Replies View RelatedIs there a simple command to copy files that have been created within the past 2 hours?I've been looking through the man pages for unisonrsyncfindcpand I can't find anything I'm looking for.All I need is a simple command.Code:Copy folder a to b if created < 2 hours.
View 4 Replies View Relatedi have created on folder in my server to upload some regular states. I want that user can modify or upload already stored files. but, should not upload any unwanted files orfolders.for that i want to use "rm" command as auto scheduler (putting this in cron tab.so that all files will be removed except some required files / folders for which this upload facility is activated. users are using secure-shell for uploading data.
View 1 Replies View Relatedinstall imagemagick python, and pygtk.
Code:
sudo apt-get install imagemagick python pygtk
Now save the following script somewhere as imgclip.py. This is a simple python script which takes an image file and puts it in the gnome-clipboard.
Code:
#! /usr/bin/python
import pygtk
pygtk.require('2.0')
[code]...
Is there a way to gunzip a file that isn't ending with a .zip even though I know for a fact the file is indeed a zip?
View 2 Replies View RelatedHow can you create a script to move or copy files from a main directory into multiple directories below the main directory.
View 7 Replies View RelatedCode:
if [ -x /usr/bin/id ]; then
if [ -z "$EUID" ]; then
[code]....
$ ls one.tar.gz
one.tar.gz
$ tar -xvfz one.tar.gz
tar: z: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
$ tar -xvzf one.tar.gz
one
$ tar -xzvf one.tar.gz
one
$ tar -zxvf one.tar.gz
one
$
i've an issue in a firewall command i hope u help me on.when i try to type the following firewall command:iptables -A INPUT -s xxx.xxx.xxx.xxx -dport 8000:9000 -p tcp -j ACCEPTit gives me:Bad argument `8000:9000`it complaints about the port range and i cant see in problems in that.i also tried to change the order of the options but it never worked.one other thing,why it don't allow me to add -sport option in the above command?
View 1 Replies View RelatedWhen i installed ubuntu. I made a seperate partition so that i could copy an ISO image onto it of an up-to-date version of ubuntu. I wanted to then boot the ISO up so i could install the version that way.I've already tried doing it through the update manager but it'll download, almost be done with installing and it freezes on me. so i figured this would be easier. However i do not know how to gain access to the other partition to copy the ISO image.
View 6 Replies View RelatedI have many files and folders in my source folder. I want to copy some files and folders from that source folder to destination folder. What should be require to given with the "cp" command?
View 1 Replies View RelatedI'm trying to use the dirs command with the +N option. The manual says: dirs [-clpv] [+n] [-n]Without options, displays the list of currently remembered directories. The default display is on a single line with directory names separated by spaces. Direc- tories are added to the list with the pushd command; the popd command removes entries from the list. +n Displays the nth entry counting from the left of the list shown by dirs when invoked without options, starting with zero.
dirs -v shows:
0 /dir1/
1 /dir2/
2 /dir3/
However, dir +n 1, dir +N 1, dir -v +n 1, dir -v +N 1 all give:
[Code]...
In the rpm manual, Print 50 hash marks as the package archive is unpacked. Use with -v|--verbose for a nicer display. But actually, there're not enough hash marks when I'm installing a package. About 44 hash marks there...Well, I just want to know where the `50 hash marks' are.
View 4 Replies View RelatedI am writing a shell script that unzips a ZIP file into an existing hierarchy of files, potentially overwriting some of the files. The problem is that the unzip command asks for confirmation: replace jsp/extension/add-aspect.jsp? [y]es, [n]o, [A]ll, [N]one, [r]ename: y
This is unacceptable for a script.I need an option to force unzip to overwrite the files.I did not find in the man page nor with Google.
I tried to install gfortran on my computer. When I extract the tarball, I forgot the '-C' option of the command 'tar', which should be added, according to the instruction of installation.
That is to say, I wrote in the mp directory:
Then, the tarball creates a '/usr' directory under '/tmp' directory, and it contains only a /local directory, which contains only a /gfortran directory.
The thing is, when I modify the name of this directory, for example, from /usr to /usr-modi, I found that the name of the directory /usr under the root directory is also changed from /usr to /usr-modi.
How can I delete this annoying /usr directory under /tmp, without tragically affect /usr under the root directory?
For example, if I type ':pwd' to get the current working directory, I can select the text in gvim but I can't figure out how to copy it to the clipboard. If I try the same in console vim, I can't even select it with the mouse. I would like this to work with all vim commands, such as set guifont to copy the guifont=Consolas:h10:cANSI output.
View 4 Replies View RelatedI am trying to automate an svnadmin dump command for a backup script, and I want to do something like this:
find /var/svn/* ( ! -name dir -prune ) -type d -exec svnadmin dump {} > {}.svn ;
This seems to work, in that it looks through each svn repository in /var/svn, and runs svnadmin dump on it.
However, the second {} in the exec command doesn't get substituted for the name of the directory being processed. It basically just results a single file named {}.svn.
I suspect that this is because the shell interprets > to end the find command, and it tries redirecting stdout from that command to the file named {}.svn.
i use linux ubuntu..i try to copy db and type some mysqldump command..but at terminal show: The program 'mysqldump' can be found in the following packages:
* mysql-client-5.0
* mysql-client-5.1
Try: sudo apt-get install <selected package> bash: mysqldump: command not found
how to get mysqldump for my pc? i've tried to follow the instruction,but show like below:
Err http://ubuntu-ashisuto.ubuntulinux.jp jaunty/main libnet-daemon-perl 0.43-1 Could not connect to ubuntu-ashisuto.ubuntulinux.jp:80 (122.216.218.146), connection timed out
