General :: Cannot Detect Or Mount Cd-rom On Ubuntu (server) 6.06.1 I386?
Nov 22, 2010
So I am trying to install ubuntu server on to a sony vaio laptop (long story in and of itself) I have a few questions the first and most important being this: 1. What is the module and /dev/ I am supposed to use to get it to recognize the drive? It kind of dumb because it can't read the drive that it's installing from ya'know? The drive is a sony nec optiarc AD-7560S the vaio is a VGN-NS110E all stock equip except the hardrive.
2. Keeping in mind that I may..probably will move the hdd to a netbook what are ALL the module I will need to finish the install and how do I add them in (can I use a usb or do I have to re-burn the iso)
3. What do I need to do to get the built in remote desktop to run once the install is done and most of the software is taken care of. Also I need to be able to install stuff from the remote computer and said remote computer may be holding the program. I am also looking into rdc-ing from my andriod (tmobile g1)
View 5 Replies
ADVERTISEMENT
Jan 3, 2010
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies
View Related
Apr 29, 2011
Trying to install a newly downloaded DVD image of 11.04 this morning on my T410 LT (4 core/4GB). The image MD5'd okay, burnt it, stuck it in the drive, rebooted, asked me about install lang = english, select install ubuntu, get subject error and it falls into initramfs prompt.So, I put my 10.04 install CD in and guess what, it works!
I will repeat what I have already posted in the another forum, and I understand install is a difficult part of the system, but there is always some glitch or another just trying to start install with ubuntu. Once it runs, if it run, I normally see few other problems after that.
View 2 Replies
View Related
Feb 25, 2010
For RHEL 5.4,
# uname -r
2.6.18-164.11.1.el5
# uname -m
[code].....
show some "duplicate" rpms, one for the i386 and one for the x86_64 platform?
For example,
aspell-0.60.3-7.1.i386
aspell-0.60.3-7.1.x86_64
There are numerous other "dups" like that. Is this normal?
View 1 Replies
View Related
Mar 11, 2011
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
View 2 Replies
View Related
Aug 21, 2010
I was following a simple tutorial on how to program and compile a hello world program using assembly when I got this error;Quote:ld: i386 architecture of input file `hello.o' is incompatible with i386:x86-64 output.The tutorial told me to make two files;Quote:hello.asmsection .data;section declaration
msg db "Hello, world!",0xa;our dear string
len equ $ - msg ;length of our dear string
section .text;section declaration
[code]....
View 3 Replies
View Related
Aug 10, 2010
I'm trying to install ubuntu-10.04-server-amd64 from a 2gb usb stick. I used Universal-USB-Installer-v1.7.7 to put the contents of the iso onto the usb disc, the installer boots fine but it always fails at "Detect and mount CD-ROM". Any suggestions? I thought about trying to mount the usb stick (/dev/sdb) to the where the installer is looking for the CD-ROM but I don't really know where that is.
View 9 Replies
View Related
Mar 1, 2010
I have a external usb 20Gb hdd. It was a ntfs partition but i could'nt mount it, so I try with a ext3 partition, because with centos it's mount automaticly, but... for some reason that I don't know, even with a ext3 partition my centos don't detect my external usb hdd, howerver I already try to mount it on ubuntu to see if it work, even on windows with some programm to recognize ext3, it was alright, but why can't i mount it on my centos?
View 13 Replies
View Related
Feb 3, 2010
I'd like to report an issue I've had with Ubuntu server ISO. I downloaded ubuntu-9.10-server-i386.iso by HTTP on ubuntu's website and burned it on a CD. It doesn't work well. I got an error in udevadm sys/devices/pci0000 etc. it was a problem with the hardware, but it seems that it's the ISO that is corrupted. I checked the MD5 checksum and it's not good. Then I download the same ISO a second time (by HTTP) and same problem.
So it seems to me that the ubuntu-9.10-server-i386.iso that we can download by HTTP is not the same as the torrent one. Maybe I'm wrong. Anyway, if I'm right I hope this information will be useful for administrators.
View 1 Replies
View Related
Apr 22, 2011
I am an experienced Ubuntu Linux user, but the fact is that I need some help. I recently set up a "venerable"(Pentium 4, single-core, 2.4 GHz, 32-bit architecture) machine with Ubuntu Linux version 10.04 server-i386. My objective is to set up a "kiosk" directory on it which everyone(including guests) on my SOHO network can read from and write to.
I have designated the directory "kiosk"(no surprise there) and defined it in smb.conf. It is directly under the "home" directory, as path = /home/kiosk and set the file permissions as drwxrwxrwx or, if you prefer, like chmod 777. I have a separate machine, System Librarian running Ubuntu Linux 10.04 Desktop amd64 on the network(via Wi-Fi) and a second separate machine running Windows XP Pro, with SP3, also on the network this time via Fast EtherNet(100 Mbs).
From the Linux machine, I can read a complete file list, but I cannot "open" an RTF or an ODT doc in the kiosk directory. When I try to do so, OpenOffice.org simply "opens" a blank, untitled document. JPEG and PNG files in the kiosk directory open just fine. I cannot write to the kiosk directory from this machine, either.
From the Windows XP machine, by contrast, I can list files, open RTF and ODT docs(using Microsoft WordPad) and write file to it without any apparent problems. The file format on the server(Iguanodon) is ext4. Obviously, I have made some sort of mistake in setting this share up,
View 4 Replies
View Related
Aug 17, 2010
Im trying to install Ubuntu server for DVD/CD iso.The mdsum is correct: md5sum ubuntu-10.04-server-i386.iso ives 15342636441181f7a19c65984b44e24c ubuntu-10.04-server-i386.isoI have tried it a number of times and the same sequence re-occurs:The first error occur during �Installing the base system�First sign is a red screen displaying a �Debootstrap warning� After a few re-tries the system defaults back to the Installer menu:I then select to post the debugger logs to a web server that starts:the first sign of problems in syslog are:
Aug 17 09:35:35 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug 17 09:35:37 hw-detect: Loading PCMCIA bridge driver module: i82365
Aug 17 09:35:37 kernel: [ 268.912151] Intel ISA PCIC probe: not found.
[code]....
View 5 Replies
View Related
Jun 2, 2009
Can anyone tell me where I can find the sun-aclg-1.0.3-1.i386.rpm patch for linux platform ? I need it in order to upgrade the sun Java directory server to 6.3.1 version.
View 1 Replies
View Related
Nov 2, 2010
I have been given a "gift" of a Netfinity 5100 that currently has that other M$ operating system on it. I want to configure it as closely as possible to my web server located in Chicago that uses CentOS 5.5. and use it as a "test server".
This is daunting for me as I've only been involved with Linux for less than 6 months. I have Ubuntu 10.10 on my desktop PC.
The person who gave it to me indicated that I should plug it in and let the 2 arrays charge for 24 hours. I'm doing that. I also have had an electrician install a clean new 20 amp circuit for it. And I have downloaded and created a CentOS 5.5 i386 Live CD.
OK ... we've now exhausted my realm of knowledge. Can anyone give me a broad scope of what needs to be done? I will try to plug in the specifics of each step as I progress.
A assume I plug in a keyboard and screen to it. Do I use an ethernet connection between the server and my router to provide broadband ... what steps are necessary to configure that? Do I need to download and install Apache and MySQL .. if so, where?
View 2 Replies
View Related
Sep 21, 2011
So I'm playing around w/ some Cisco equipment and needed a quick tftp server. Go to command line and type yum install tftp-server. I get No Package available! I can clearly see it here on the i386 repo. Any ideas?? In the meantime, I'm just going to upgrade this lil 600m laptop to CentOS 6 to quickly solve the problem but I thought it was curious.
View 4 Replies
View Related
Jan 8, 2010
i have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.
How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute
dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.
View 1 Replies
View Related
Mar 17, 2011
Anyone know what version of spam assassin is newer 3.3.1-3 or 3.3.1-52 I would assume 52 is newer but I don't know if once it reaches 99 it going to 2 Example 3.3.1-99 ---- 3.3.1-2 -----3.3.1-21 and so on. I could be completely off but can anyone just clarify if 3.3.1-3 is newer or older than 3.3.1.52
(On a side note does anyone know the difference between spamassassin-3.3.1-3.el5.rfx.i386.rpm and spamassassin-3.3.1-3.el5.rf.i386.rpm?? What does the X mean?) I looked at the release date of .52 and it seems to be in march 2010 whereas .1-3 seems to be in november. oes that seem correct? Does anyone have a direct download to spamassassin-3.3.1-3el5.rf.i386.rpm???
View 6 Replies
View Related
Jul 12, 2009
This is a standard install, just like I've done dozens of times before.
Plain vanilla, just installed.
When I boot, I get to the splash screen and it doesn't go into the default selection.
Could this be a Hardware thingy? The reason I ask is because I've had this issue happening with 5.2 on the same machine. I just formatted it completely and installed a fresh 5.3 i386 on it and I get the same behavior.
[root@server ~]# cat /boot/grub/grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[Code]....
View 2 Replies
View Related
Apr 19, 2009
I am trying to NFS mount from an Atmel AVR32 Grasshopper (embedded Linux) client to a Ubuntu 8.04LTS server.
I have followed the guidelines in the Ubuntu NFSv4HowTo [url]
My export directory is /export/home
I know the network is working fine, because I can telnet into the Grasshopper, and browse to its web page.
View 2 Replies
View Related
Jul 6, 2011
I got gigabyte chipset with an raid support. Currently I have 2 hdd's running in raid 1. When I was first installing ubuntu 11.04 server my fakeraid was detected, and I assigned a name for it in the initial installer and it was auto-mounted (working 100%) ever since.
However I was forced to reinstall my ubuntu server, and this part was somehow skipped in the installer.
HDD can still be seen in /dev/mapper
I can see
control
jmicron_GRAID -> ../dm-0
jmicron_GRAID1 -> ../dm-1
View 1 Replies
View Related
Mar 4, 2010
We can mount one NFS server just fine, but if we try mounting a share from another NFS server on the same domain we are unable to. We are using Fedora 10. Has anyone run into a problem trying to mount an exported share folder from an NFS server. Some of us get access denied and we've chmod 777 on the exported folder. The export file contains:
/labdocs 192.168.1.0/24(rw, sync, no_root_squash)
And that's it. We run exportfs -a -v and it shows up fine. On one of the client systems we try to mount the folder on a directory created by root
mkdir /docs
mount 192.168.1.13:/labdocs /docs
it either hangs or displays a message access denied.
View 2 Replies
View Related
Jul 25, 2011
whats the difference between i386 and x86_64 OS. and also difference between x86_64 Live CD and x86_64 DVD? W Whats extra in DVD ?
View 4 Replies
View Related
Jul 23, 2011
Any of u who can tell me the Software for PDF to DOC Converter for Debian 6.0 i386 Operating System ...
View 2 Replies
View Related
Jul 3, 2010
I m using Ubuntu 9.04 version.I wanted to run .exe files on it so i downloaded wine_1.1.38 version. After running this wine.deb an error is displayed that is "Error: Dependency is not satisfiable: libaudio2". So what should i do now to run .exe files. That .exe file is setup.exe file of software of wireless internet connection.This software is required is establish the internet connection.
View 2 Replies
View Related
Apr 29, 2010
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
View 9 Replies
View Related
Feb 9, 2010
i have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur."mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host"
View 1 Replies
View Related
Jul 19, 2010
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies
View Related
Jun 16, 2011
Using NFS on the client machine. I am running scientific linux on my machine. Its working fine for my other machines.I have made sure that the firewall is disabled and also the selinux too. here is what i get when i use rpcinfo -p on the client.
rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100007 2 udp 868 ypbind
100007 1 udp 868 ypbind .....
View 1 Replies
View Related
Aug 23, 2010
I built a Suse Linux server on vmware. I attached an RDM to the server and can now see the drive as a "Mass Storage Drive" in Applications - computer. When I double click on the icon, I get an error message that indicates that the drive can not be mounted. I tried to mount in gnome terminal using: mount /dev/sdb and get "can't find .dev/sdb in /etc/fstab or /etc/mtab". I tried adding device that I would like to mount to fstab, but don't think I have the settings correct. I looking for any info that might step me through the process.
View 2 Replies
View Related
Apr 12, 2010
I have a HDD that cannot be bootup (should be the boot file problem, I want to get back the data in it, so I plug it to another server and trying to copy the data from the failure HDD to this server. Now, the server is re-boot and in maintenance mode as the HDD cannot do the system check. when I try to copy data, it pops the server is read-only system.
1. How to let me write data to the server ; or
2. Let me boot up the server, then I will mount the HDD to it and copy the data to the server.
View 1 Replies
View Related
Mar 15, 2011
I tried to install this RPM file and Yum says it's installed but when I type procexp in the shell it states that command not found. So how do I track the problem down?
View 5 Replies
View Related
