General :: Allow Other Computers To Use Local SOCKS SSH Tunnel?
Apr 30, 2011
I often use an SSH tunnelling on my computer, using a SOCKS proxy.
ssh -D 1234 example.com
However, this only accepts local connections. I would like other systems on my network to be able to use the proxy on my computer as well.
How can I achieve this? If SSH doesn't have an option itself I imagine it might be possible to have a program proxy the proxy on a different port, but I don't know if there are any common tools to do this.
View 2 Replies
ADVERTISEMENT
Dec 3, 2010
i have a Netbook which is connected to the internet with its wireless card, i have another computer that connect to the Netbook via wired cable (LAN), in order to shre files BTW the computer and still get an internet connection to the bench computer i am using SSH server on hte Netbook, and create a SOCKs (i really don't know that is it exactlly, i just followed up with some tutorial) on the bench and i can get an internet connection on the bench machine via Firefox.
the problem arise when i try to use YUM, as far as i understand it, it does not know about the SOCKs.the masseges that i got from yum are:14: PYCURL ERROR 56 - ""i have tried so far (based on some googleing that i have did):1. type 'export http_proxy='http://localhost:8080"' (8080 is the port i use to create the Dynamic SSH for the SOCKs) in the bench machine.2. in yum.conf i have tried to add a 'proxy=...' line.i have found somthing that i think could help, but i didn't tried it
View 1 Replies
View Related
Jun 6, 2011
I have been trying to remotely access another computer (which is outside my local network) with ssh and have not succeeded. I've done everything I've seen nothing to suggest and as I opened port 22 on both computers, I have ssh configured so as to allow access from any computer (with password) and tried to log in using the external IP (the encounter with these online pages of "what is my ip"), I have a firewall turned off, the pc from which I agree is Fedora 14 that I want to access MacOS 10.5.8.
I need this because I'm running a very heavy program at the university that I can not run on my personal laptop, but do not want to have to go every day to college for this.
View 1 Replies
View Related
Jan 15, 2011
I can't get past the "scp -p id_rsa.pub" step; ssh fails with "Could not resolve hostname" errors. Both machines are connected with a hub. I've also tried using the IP address in the place of hostnames with no avail. Both machines can ping eachother successfully.The server has the "openssh-server" package installed.
View 1 Replies
View Related
Sep 28, 2009
I am using Fedora 11 all upgrades, wireless network WUSB54G network adapter. I can get to the internet but cannot get to any Windows (192.168.1.100) or Fedora 11 (...104) computers, printer (....101, 105). Here are the tests I have run.
[root@Fedora2 sbin]# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.76 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=268 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.63 ms
^C
--- 192.168.1.1 ping statistics ---
View 1 Replies
View Related
Dec 30, 2010
In Ubuntu 10.10, I have my printer, an Epson D120, shared. I can print from the computer itself, but other computers cannot print to it. Both Ubuntu and Windows machines have the printer successfully installed. They can access it, I can access CUPS from all these machines and the the job queue even reports the jobs sent from these computers. But the page count is unknown and nothing is printed, although it says the job is completed.
I'm quite desperate to get this to work. It would suck if I need to go back to Windows just because some minor thing goes wrong. I really don't understand why local prints are OK, but prints from the network are not working.
View 2 Replies
View Related
Jun 4, 2011
Should I be able to transfer files between computers wired to the same router? Is the router bridging function used to transfer data between wired computers? I just got DSL and I'm new to networking. I have openSuse 11.4 on two computers plugged into a Belkin router. The internet connection to my ISP works from either computer. If I ping $HOSTNAME from either computer, the hostnames are different, but the IP address is the same which is that of my ISP. I only have the one router, but it has a bridging option. I don't know if it can do both bridging and routing simultaneously.
View 9 Replies
View Related
Dec 5, 2010
I will cut to the chase. I am running three ubuntu computers on my local network:my desktop which runs ethernet, and two laptops which run wireless on the same network, and all from the same router. For purpose of this thread, I am concentrating on this one issue with pulse(assuming its pulse doing this). When I have two computers running at the same time, or even all three, I can hear bursts of sound coming from the other computer, not all the time, but consistently. I don't know what is causing this. I've searched hi and low in all ubuntu pulse audio forums and those mentioning pulseaudio and I have not seen this issue posted anywhere. Most threads deal with issues of not being able to get pulse to recognise audio from one computer to the other...mine is just the opposite...I'M TRYING TO STOP THIS FROM HAPPENING!...... If I'm listening to my music on my desktop, I don't want to hear what my son is playing on his laptop...and vice versa. all the computers at my home are running lucid lynx, latest updates and latest approved kernel as of the date of this post. 2.6.32-26-generic.
View 2 Replies
View Related
Jul 6, 2010
i just one to emulate the windows 2003 - windows XP easy VPN deployment, with my ubuntu server.I got my server side (ubuntu) and client side ( openVPN gui) and everything looks okbut now, i cant make a //server/SHARED and get from my house to the office's docs, despite the conection its ok... whats wrong?
View 14 Replies
View Related
Jul 6, 2010
I have socks proxy running on port 1080. I want other people on LAN to use this proxy. How can I do that?
One way is that the client can run this command and then use proxy 127.0.0.1:1080 on his computer:
ssh -L 1080:127.0.0.1:1080 myusername@myipaddress
But, I dont want to use ssh because that requires me to give my password to others.
View 2 Replies
View Related
Feb 17, 2010
what is the command to sftp from one linux host to another linux host through a SOCKS v5 that requires authentication? I have tried:
Code:
# sftp -o "ProxyCommand netcat -X socks_proxy_host:1080 %h %p" external-server
I know this does not have auth in it but I was going to come to that later
output
Code:
Connecting to external-server...
netcat: invalid option -- 'X'
[code].....
View 7 Replies
View Related
Jun 28, 2011
Is there an easy way, preferably by using the linux terminal, to check if a socks 5 proxy works?
View 1 Replies
View Related
Apr 22, 2010
I have a problem with dynamic socks:
My VPS having this output of /sbin/ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr 00:19:B9:B6:D2:3D
inet addr:x.y.114.13 Bcast:x.y.114.255 Mask:255.255.255.0
inet6 addr: abcd::xyz:fghj:ffgh:d23d/64 Scope:Link
[code]....
How can i use [x.y.101.1-3] address as proxy with putty?
View 1 Replies
View Related
Oct 15, 2010
I'm going to make this as easy as possible for everyone to understand my thoughts. I am trying to install dante socks server on bt4. I'm using the root account incase someone asks.Information on what i have and want:
Code:
root@bt:/# uname -a
Linux bt 2.6.30.9 #1 SMP Tue Dec 1 21:51:08 EST 2009 i686 GNU/Linux
Code:
root@bt:/# apt-cache show dante-server
Package: dante-server
Priority: optional
[Code]...
So what do you guys think i should do? Apart from searching on google wich i already did, but then again i'm no linux expert so i'm not sure what to look for.
View 7 Replies
View Related
Jun 25, 2010
I'm using Ubuntu 10.04, and starting a SOCKS proxy with 'ssh -D', and setting Ubuntu to use it with "System -> Preferences -> Network Proxy". Firefox uses the proxy, and the proxy's IP appears when I visit a site like [URL]. is Firefox resolving DNS requests through this proxy? Is my web-browsing truly secure? (That is, until I exit the other end of the proxy.
I know it's insecure after that.) (And I've verified the keys, I'm not being man-in-the-middled) (And--screw it. You know what I mean. Is it resolving DNS requests through the proxy?)I don't know how I would go about verifying such a thing for myself.Using additional hardware such as another debugging proxy is not an option. If Firefox isn't resolving my DNS requests through the SOCKS proxy, how do I go about fixing it?
View 3 Replies
View Related
Apr 8, 2010
I've been doing some security testing in a lab environment that does not have direct internet access. From home to connect to my lab machine, I
1. SSH to machineA.
2. SSH from machineA to machineB
where machineB is my actual lab machine. neither machineA or machineB allow anything other than SSH, and machineB is only accessible from machineA. However, I really need to run yum on machineB.I have managed to get internet access via Firefox on machineB by creating a series of SOCKS proxy via SSH.
1. machineB: ssh -L 12345:localhost:12345 user@machineA
2. machineA: ssh -D 12345 user@machineC
3. machineB: configure firefox to use socks proxy, localhost, 12345
where machineC has internet without limits placed. This is the only way I have managed to get internet working. I tried using ssh -L all the way from machineB->machineA->machineC but it didn't work (even when setting Firefox to use http proxy). I tried using ssh -D all the way, but again that doesn't work either. I do have access via Firefox using socks proxy. However, yum update fails to retrieve mirror list, and from what I have found I don't believe yum supports socks proxy directly. Instead, it uses http_proxy / ftp_proxy.how to get yum to go out over the SOCKS proxy I created (same one using in Firefox)? It seems like since Firefox can access the internet and everything without issues, i should be able to get yum to tunnel through the same connection to access everything.... I tried
>export http_proxy="http://localhost:12345"
(yum.conf) proxy="http://localhost:12345"
View 8 Replies
View Related
Jan 31, 2011
im trying to connect two computers on lan.One computer has: VMWare Workstation and has Opensuse 11.3 mounted in it.The other computer has: VMWare Player and has Opensuse 11.3 mounted in it.Both computers are connected to a switch with cables.I have followed this guide in both computers:Depanati singuri calculatorul!: Opensuse 11.3 - configure local networkin order to setup a network.In one computer, if i go to: Computer---Network---Network folder, i only see one machine. When in fact i could see both of them right
View 9 Replies
View Related
Dec 9, 2010
One of Konqueror's unique features is that i can name a local process as the action in a form. When i submit that form, the local process is executed. Very helpful for certain offline tasks. What would make it even better is if i could find a way to pass some data to that local process from the html page. This could be the content of a hidden input item, etc. Alternatively, if there is a way for Konqueror to create or update a local file with data from the html page, that would acheive the same end.
View 1 Replies
View Related
Sep 27, 2010
What command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
View 2 Replies
View Related
Dec 9, 2009
I am trying to install tilp, a program for the link between a computer and a Texas Instruments calculator. I have downloaded all the packages to a local directory. I tried telling yum to install all the packages at the same time, though, the dependencies still fail to resolve (though they are all in the directory). I don't know if it would be safe to force install without the dependencies (even though I would install them later).
View 4 Replies
View Related
Jul 7, 2010
I'm working remotely at the minute, but have several 'incoming' automatic reverse shells connecting to a dedicated server. This dedicated server does not have X, but several of the 'incoming' shell servers do. Basically, take three machines, laptop, server, client. Laptop and client have X, server does not. All three machines have password-less logins to each other (laptop > server, server > client) and can password-lessly establish a shell.
I've tried ssh -X user@server "ssh -X user@client gui-application" and, no suprise, I'm getting 'Cannot open Display" messages. Does anyone know I nice one-liner for this kind of tunnelling?
View 3 Replies
View Related
Jan 31, 2010
I need to know the procedure to setup VPN between two network. i setup openvpn access server to do this easy. 1. Step by step procedure to setup VPN 2. Setup VPN with DHCP 3. How to check that open vpn is running successfully.
View 1 Replies
View Related
Mar 25, 2011
i have jsut setup a kvm virtual machine on my server. to connect to the VM from outside of the network i use ssh tunneling. what i would liek to know is if there is any way to create a new user with jsut ssh access. i dont want people to be able to edit files in ~/ or such. jsut need the user to estabilish the connection to the server
View 1 Replies
View Related
Aug 25, 2010
Scenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
View 1 Replies
View Related
Nov 8, 2010
Machine A is located behind client firewall. The machine runs telnetd. This is Linux machine with Python 2.5.4 installed. I do not know the IP addy of the router and firewall is not open incoming. outgoing firewall is open.
Machine B (Windows machine) is a server with well known IP address. I can install any programs I want on either machine.
The idea is that I want Machine A to open a socket to machine B. Then I want to hold that socket and use to run a telnet session from Machine B to Machine A telnetd server.
View 1 Replies
View Related
Aug 31, 2011
I've been working with my OpenVPN server for a while, and I have a rather interesting problem. I need to redirect all client traffic through the tunnel except for a couple IP's that need to be resolvable locally. The way I'm doing this is pushing these routes from the server:
Server 'PUSH' directives
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
I'm seeing that translating into these Windows routes:
Windows routes occurring
Wed Aug 31 15:14:35 2011 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,route 10.8.0.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.0.6 10.8.0.5'
Wed Aug 31 15:14:35 2011 ROUTE default_gateway=192.168.1.254
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 199.[*.*.*] MASK 255.255.255.255 192.168.1.254
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5
I've hidden my server's IP beginning with 199 for security purposes.What I've gathered.I'm assuming that 0.0.0.0 is a kind of code for "everything," so I'm not sure how I could get this to work, but the general idea is that I need a specific IP range (172.16.*) to be resolvable on the LOCAL NETWORK (of the client) meaning it does not go through the VPN tunnel and the client can connect to 172.16.* locally.Is this possible? Routes can be executed through the command line, server "push" or client config options. Any way to get this to work while still routing other traffic through would do, really.
Additional Info: I have the server running on Debian 64-bit and the client running on Windows 7 (although Vista needs to work as well).Client/server configs can be provided if needed.
View 2 Replies
View Related
May 25, 2011
I need create ssh forwarding to other linux box that works as a proxy.I have two linux boxes(centos 5.5), one in the office(server1) behind firewall, other at colocation(server2)server1 has squid proxy instaled on port 3128.i cant use server1 as a direct proxy from home because its behind firewall.iwas able to create ssh tunnel from server1 to server2 and when i log in to server2 ican ssh root@localhost -p 12312 to server1
what i need is configure server2 so it forwards port server2:3128 to server1:3128....and i could add server2 ip addres and port to firefox proxy's and access ofice network.
View 3 Replies
View Related
Feb 1, 2010
I was having trouble setting up a db connection from my local machine to a db server that was configured to only accept connections from machines behind its own subnet. I had trouble setting up a multiple hop tunnel for chaining port forwarding through my firewall machine on the same subnet as the db. My first attempt involved two port forwards, on localhost and on the firewall machine, which didn't work for me. This approach I found at URL... involved constructing an end to end connection to the db via the firewall machine.
View 2 Replies
View Related
Apr 1, 2010
I've just started experimenting with SSH tunnels. I wanted a way to connect to MySQL on our website VPS but wanted the connection encrypted rather than just using PHP's mysql_connect() function and connecting to the remote IP. This seems to be working great. I'm also looking into autossh to make sure that the tunnel gets reconnected when it drops.is there a command/utility that can list the currently active SSH tunnels? Be great if there was a way of terminating an active tunnel through a command as well. Or is it a case of manually digging through the process list and killing the specific PID like I have been?
View 1 Replies
View Related
Jan 25, 2010
I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this:
client
dev tun
proto udp
remote openvpn.xxx.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
[Code]...
My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help:[URl].. As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file.
View 1 Replies
View Related
