General :: Ubuntu 10.0 Server Installed On Windows 7 - Partition And GUI?
Dec 13, 2010
I am very new to Linux and trying to setup a Ubuntu server in my Windows 7 PC. that means, I am trying to have a dual boot system. While starting, my PC had 500GB and only one drive C. 18GB of it is used and rest was free.
I have gone thru the following step.
1. Downloaded Ubuntu server on a USB using "Universal USb installer"
2. Booted the PC from the USB and started the Install Ubuntu Server
3. After a few steps the install showed 4 partition options.
I specified the guided partitioning options using free space. (The other options where : Using entire disk, using entire disk with LVM, Manual) Next step it asked me to enter the disk space- it told me it will take at-least 19 GB and maximum available is approx 450GB. My intention was to use the full free space as much as possible. So I specified "max". It told me that it is going to overwrite and create the new partition. Then it progressed fine.
4. I also chosen to install the LAMP stack /Postgress etc.
The installation completed fine When rebooted I logged back in in windows 7. When I opened explorer, I still see that the C drive has around 18GB and 396 GB free space. t seems some of the space has been used by the linux server install. I again started my PC and now I logged in to Ubuntu. I tried command $ df -h . But it is showing the following:
I originally had my full hard drive as a full Ubuntu partition but I then re-sized that and installed Windows on a new partition. Now I guess the boot sector got overwritten and I don't have a choice to boot either Windows or Ubuntu. I know I have to reconfigure GRUB or another boot loader to allow the choice but I am not sure of how to go about that.
I have already done the installation process following the guide on Ubuntu's site, got everything up and running but the partition that I made in the installer was too small. I was then directed by a friend (a slightly less inexperienced newbie) to modify this through Easeus Partition Manager. I shrunk the Windows 7 partition to only the space that was in use, giving the newly unallocated space to the Ubuntu partition. Set the changes and rebooted the computer, then got the message "unknown filesystem, grub rescue". Now have no idea what to do with this. What happened??
I've been scouring the forums for something helpful but I can't find anything that is a comparable circumstance.I can still access Ubuntu through my flashdrive.
I just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.
If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.
If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.
I've been serching the forum for hours and every thread related to "GRUB error: no such partition" that i've read relates to fixing the issue for users with windows OS also installed or trying to get windows to boot.
How it happened: I edited partitions and now I get GRUB error: no such partition. I ONLY have Linux installed.
I was able to boot the OS by typing:
Code: set partition=(hd0,1)/boot/grub set root=(hd0,1) insmod normal normal
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
10 yr old Dell laptop with NO WORKING DRIVES. i was dual booting xp and xubuntu when i decided it was time to cut the cord. so i installed gparted and deleted my windows partition. now it won't boot. my assumption is that i never installed grub. i got a usb to ide cable so i can access the hard drive from my desktop (xp home edition). i read that grub should be in a folder called "boot". i see on my hard drive that i have: "disks", "winboot" "install", "uninstall-wubi.exe", and "xubuntu.ico". if i expand the "disks" folder, there is a "boot" folder containing another folder called "grub", but the folder is empty. is this where i install it? am i an idiot and missing something stupid? where do i download grub if i need it?
I am not been able to re size the partition. Can anyone please help. I tried to re size and install ubuntu 10.04 on two machines but it did not work. Details are HP mini ( windows xp pre installed with new ntfs partition). Lenovo thinkpad ( windows vista pre installed).Is new windows partition is non - re sizable?
Yesterday I installed a new server with a large partition for my XEN images. This partition is a about 930GB. The installation tooks ages and after he finished I was finding out why that is. The SoftRAID1 I configured is rebuilding the large partition.
I currently have a windows server running with XAMPP installed.I want to try out ubuntu server, I am a complete linux newbie and was wondering if there was a similar package to XAMPP out there with:ApachePHPMySQLAnd some form of ftp server
I have C: and D: on my computer. the D drive has 250 GB of free space. I would like to install it on the D drive without harming my existing windows. I have booted through an USB and it has an icon that says "install fedora on your hard disk". How do I make sure that it will be installed only my D drive without harming my windows?
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP Mint Ubuntu-Studio Edubuntu One of the E17 OSs Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
I have a PC, with 1 HD of 500GB and the following partitions: Windows XP - NTFS 50 GB Windows 7 - NTFS 350 GB Linux Ubuntu - 98 GB Linux swap - 2GB
The last OS that I have installed was Windows 7, and each time, when I started up my PC, I saw GRUB first, and after choosing the option to load windows, the Windows loader giving me 2 options, one for Windows 7 and one for Windows XP. I didn't like to see first GRUB and after that the windows loader, it was redundant, but everything was working well. One day, I decided to mix the windows 7 and the windows XP partitions (deleting the windows XP and resizing windows 7). I tried to do that with the Windows 7 utility included in the control panel but I couldn't. It said that I couldn't delete the active partition or something like that. It was not possible to delete the partition in which WinXP was stored.
Then, I decided to boot with Ubuntu and use the partitioning tool that comes with it to delete the WinXP partition. It was possible to delete the partition, and I also putted the option "bootable" on the 350GB Windows 7 partition. After that, I rebooted and it was not possible to load windows. Then I tried changing in GRUB the entry for Windows, because I thought if I could put the correct partition to load from, it wouldn't be more problems. I tried several times but I couldn't load windows, so I putted the Windows 7 DVD and I started the installation process, waiting to see an option saying that there was already a system in the partition of 350GB, and allowing me to fix the mbr in that partition.
My surprise was when I choose the partition of 350GB and the installation process began. I was afraid of to lose my data then I decided to reset the computer! And now, all my 350GB disk is gone! I can't see the partition when I enter with Ubuntu. I'm really worried about this, because the computer detects the 350GB partition as empty, and I don't know what to do! I turned off the computer and now I am using another to write this. I have all my files and important information in that partition! and It seems it's lost. I hope it's still possible to restore the partition. Actually I don't care if I have to install again my operating systems but I need my information!
After several times install & reinstall,i got a stable dual boot vista / ubuntu 10.10.,but i can't access or even see my windows partition from ubuntu,i installed my dual boot with wubu this time,in previous installation when i didn't use wubi , i didn't have such a problem & windows partition with all my files in it (windows files,media ,etc,) was easily accessible from "places" on ubuntu . I already disabled windows firewall & other security options but nothing changed
I have two distros and windows installed. I only want one distro (I have decided on Ubuntu) and windows. But, the other distro, the one that I want to eradicate is the last one installed and it is its GRUB in the MBR.
I know what happens from experience if I just delete that partition with a liveCD - GRUB won't boot anything on reboot.
What do I need to do from within Ubuntu or the other Linux before deleting the partition of the second distro so that I have a working GRUB when I reboot ?
I did it long time with LFS but I don't remember how. the "root" option of the kernel in grub except only the partition. How do I set the "root" as a directory in a partition?
i got this new computer with Windows 7 on it and promptly installed Ubuntu 10.10. it didn't recognize my graphics card or screen, and i was too lazy to figure it out. (xorg.conf was missing?) anyway, I went back to windows and deleted the partition that linux was on. When i reboot the computer, all it shows is "grub rescue>" and a command line. as you can probably tell by my writing, i am a teenager who lives under my parents' roof and they bought me this computer, and now it doesn't work...so i used my backup disk and i reinstalled windows back to factory settings, and it still shows up with a grub command line. so does this mean that my win os is misplaced or something.. I don't know if this matters, but i have a Gateway with Intel Pentium dual-core processor.
(Linux Noob here) I just installed Ubuntu Netbook Remix (the latest one off the official site) and had it installed on my Acer Aspire one Netbook. My netbook had Windows 7 prior to installing UNR. I managed to get a partition for UNR and installed it from the USB and just went with the steps (never gave me an option to install alongside Windows, since I booted using the UNR image from the USB).
so got UNR working but the problem is that there seems to be no option to boot to Windows 7. My netbook boots straight to UNR. I know I have to edit the GRUB or something but I have no idea how to even do this. How do I setup UNR so that I get the option to boot with either UNR or Windows. I previously installed Jolicloud and it was simple enough that it gave me the option to boot to either Jcloud or Win 7. How do I do this with UNR?
I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
I'm using Core 2 Duo. So, from Intel website I found that it is 64-bit architecture CPU.
Long back I've installed Ubuntu OS on this machine. But I'm not sure if I installed x86-32 or x86-64 version of Linux. I want to know which version of Linux I'm using. How to know that?
I have a hard drive which already has Windows installed. On a new hard drive, I have Ubuntu Linux installed.Is there anyway to run my already installed Windows using Vmware Player on my Ubuntu setup?
My brother the XP/vista/7 lover was wondering what all distros can he run from his XP hard drive without partitiong,etc like WUBI or Puppy in frugal mode is all I know? So, anyone know of all the distros that can be installed/run in windows without partitioning,etc? I dont have dindows so dont know...?
I'm very new with kubuntu. A friend st work turned me on to it. Seemed very simple. After a few days palying with it on a dual boot...i decided to fully install. I could not get thw wi-fi to work. Decided to reinstall. Could not get the reinstall to initiate. Tried to reinstall 7. no good.
