General :: Tiny Core Drains Battery?
Sep 21, 2011
I was using a friends laptop and decided to boot into an install of tinycore on a flash drive. This laptops battery is already pretty much shot because it is left plugged in all the time no matter what the use, and before I booted into it the level was at about 60%, which means about 40 minutes in windows. When I booted into tinycore, there was only about 10 minutes before it shutdown completely. I noticed the fans were on high and the air coming out was rather hot, but why does that happen?
View 1 Replies
ADVERTISEMENT
Jan 7, 2010
I've installed Karmic on an HP 6930p, and everything works, but battery life is very poor. At 100%, it says there are 2hr30min remaining, but then 35min later, it reads 1hr35min remaining. So ultimately, I think I'm only getting about 1.5hrs on a full charge; it drains super fast (even faster than my installation of Hardy on an OLD Satellite M20). This is a stark contrast to when I boot into XP Pro, and get 4.5hrs on a full charge... I'm sure XP is doing processor scaling and such to improve batt life, any package of HP drivers or some other strategy? I really don't want to go back to XP, but I may have no choice.
View 2 Replies
View Related
Sep 8, 2010
I am trying to use Tiny Core as the OS for a fairly old embedded device using a Pentium 100 with 64MB Ram.
I managed to get the Tiny Core image loaded onto a 128MB CF card. When I turn the box on, it presents me the Grup screen and I can select the bootup option (tinycore). However, soon after I am getting a DMA Timeout Error.
Also in this link: http://www.linuxquestions.org/questi...ble-it-734489/
Now, I am not familiar with Tiny Core all that well, and neither am I sure of how to modify the initramfs to include: hdparm -d0 /dev/hdb.
View 2 Replies
View Related
Mar 14, 2011
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies
View Related
Mar 26, 2011
I've a program that launches new processes, and wait for them to die before it exits. So, for example, my program is a process, and it launches 3 more processes, and when the 3 child processes end, it will exit.
As you see, at end of the example, the program used a total number of 4 processes.
1 - Now, I'm running this program in a CPU with 4 cores. This means that the program used each core for each process?
2 - How can I know which core the program used?
View 1 Replies
View Related
Apr 8, 2010
For some reason my desktop icons have decided to be very small and can't be changed (systemsettings/appearances/icons/advanced) It happened after I enabled and downloaded the files need for compiz. I have disabled compiz and now have no 3D desktop effects, but still cannot alter the desktop icon size. What have I done?
View 2 Replies
View Related
Aug 10, 2010
The only way I know is to use exit command to come out.
Is there some way to close the Xterm windows using the GUI (the mouse pointer)? Killing a lot of windows would be easier that way.
I am using Tiny Window Manager.
View 2 Replies
View Related
Mar 2, 2010
getting back to our laptop, the stability window is ~3.2V. Meaning that when you operate the battery above this the electrolyte is oxidized on the positive electrode and reduced on the negative electrode. Remember that we only want to oxidize and reduce the active materials and don't want to do anything else. All these reactions other than the ones we want are called side reactions and these are really bad for the battery. The nominal voltage of a laptop battery is 3.7 V which means that something bad wants to happen as we use the battery.So long story short, stuff (e.g., passive layers and poor kinetics of reactions) happens and things are not as bad as they seem and you can increase the voltage up to 4.2V without bad things really happening. All chargers for Li-ion cells today cut the battery off when it reaches 4.2V. What you have to realize is that at 4.2V, these side reactions are present in finite amounts and start to chemically kill the battery, but its not that dramatic.
Operating to 4.1V makes things better and extends the life, 4.0 V is even better and so on. So why don't battery manufacturers cut the voltage off at, say, 4 V to get better battery life? Because every time you cut this voltage down you decrease the capacity of the battery and its run time. The 4.2V cutoff is a compromise between good run time and decent (read "not pathetic) life.On the other hand, if you charge the battery and then pull the plug (so to speak), the battery discharges some, the voltage drops, and these reactions become less of a problem and your battery life goes up. So the best things you can do is to charge the laptop (or cell phone, camera etc.) and once its charged, pull the plug. Your battery will thank you for it.As a matter of fact, if you own a Lenovo Thinkpad, you can actually change the state of charge to which you charge the battery using the Battery Maintenance utility. You can change this from charging to 100% state (where the voltage is 4.2V) to 90% so that your voltage is less. You lose some energy is doing that, but atleast you can change it to 100% when you need battery power and put it back down to 90% when you can plug in. I wish my Mac has the same feature.
I typically use the battery for a while (say 1/2 hour to 1 hour), then plug it in and wait to fully charge it, then I pull the plug and use it again for 1/2 hour to 1h and then I repeat this. Takes some getting used to and I forget to do this, but I try.
View 1 Replies
View Related
May 1, 2010
Just installed 9.10 followed by a 10.04 upgrade (wouldn't work as a 10.04 clean install). The install and upgrade all seemed to go well.
But now when booting I get a message saying "checking battery state" and then it boots no further. This is a laptop without a battery installed, running permanently from the mains through the charger.
How can I disable this check so that the laptop will still boot without a battery fitted?
View 5 Replies
View Related
Apr 1, 2011
i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies
View Related
Nov 3, 2010
I just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
View 2 Replies
View Related
Mar 27, 2011
I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
View 5 Replies
View Related
Feb 14, 2010
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies
View Related
Oct 31, 2010
Is there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?
View 2 Replies
View Related
Jan 12, 2011
I am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?
View 14 Replies
View Related
Sep 7, 2011
I have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
View 14 Replies
View Related
May 15, 2010
I've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.
I didn't check the duration of the battery but surely it will "eat" my battery in a hurry
View 1 Replies
View Related
Apr 27, 2010
Assume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.
View 5 Replies
View Related
Jul 17, 2011
I was looking to iphone and i was surprised the quality of such tiny camera.
Is there any alternative camera for my laptop to have similar or much better then the one in iphone? So that i can use it from my laptop, but have very sharp HD quality with maximum megapixel + highest frame per second.
View 1 Replies
View Related
May 20, 2009
I have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
View 14 Replies
View Related
Aug 31, 2010
I have a 3 year old laptop with the original battery and its drained pretty bad. The "Battery may be broken" popup was driving me insane and this is how you disable it, in case you are in the same situation as me. Open terminal
Code:
gconf-editor
Drill down to...
apps --> gnome-power-manager --> notify
uncheck the low_capacity checkbox. This should disable the popup for you if your battery has little life left in it. Now, if any knows how to disable the Avahi popup, let me know.
View 3 Replies
View Related
Jul 13, 2010
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies
View Related
Oct 7, 2009
I want to generate core dump files from my program when it crashes. Its a pretty big process and has about 10-11 threads in it.I have followed the documentation to enable core dump by setting ulimit to unlimited etc. I quickly tried "A demo program creating a core dump" from the following webpage, which succeeds in Segfault and dumping a core file in the directory that I configured.However, I tried running my original program and caused it to crash. I did this by making calls to kill(), raise() or the same null pointer access as shown in the webpage above. In each case, my program crashed but did not generate a core dump file. Am I missing something?My program is in C++ and my environment is Redhat 9.0 (kernel 2.4.20)
Going through the "Why do I NOT get a core dump?" section on the same webpage as above, I can see two potential problems. One - there are issues with the suid/sgid (bullet # 6). I am not able to change any settings with suid because my system does not contain either /proc/sys/fs/suid_dumpable or /proc/sys/kernel/suid_dumpableTwo, my program has threads in it and the bullet # 8 is the problem.
View 1 Replies
View Related
Jan 27, 2010
We have a small cluster of 20 HP systems, all running CentOS 5.3 in an NFS-root environment. Half are quad-socket, quad-core Xeon E7340 @ 2.40GHz (total 16 cores), the other half are 8-socket, quad-core Opteron 8354 (total 32 cores). All systems have a Mellanox Infiniband adapter ("Mellanox Technologies MT25418 [ConnectX VPI PCIe 2.0 2.5GT/s - IB DDR / 10GigE] (rev a0)")
With kernel 2.6.18-128.1.6.el5, infiniband works fine on all systems.
With the update to kernel 2.6.18-164.11.1.el5 (and both types of node running the same NFS-root image), the 16-core Xeons still work fine. Infiniband no longer works on the 32-core Opterons. Specifically, either the ib0 interface fails to appear, or it does appear but when configured with an IP address, doesn't actually work. In either case, loading the IB kernel modules takes a long time, but I haven't instrumented the load script yet to see which module, if any, is at fault. More errors listed below.
However, if I tweak the BIOS of the 32-core systems to reduce the per-socket core count to 2 (so effectively 8-socket, dual-core, down to a total of 16 available cores), Infiniband starts working again. Putting it back to 32-cores makes it fail. Booting the older kernel makes it work again. In summary: old kernel, IB works on all systems. Newer kernel, IB only works on 16-core systems.
Updating the IB firmware from 2.5.0 to 2.7.0 (latest available) doesn't help. I also did a full 'yum update' to make sure that libmlx4, openibd all other associated packages were up-to-date. Doesn't help either.
Some errors that appear on 32-core nodes:
ib_query_port failed (-16) for mlx4_0
ib_query_port failed (-16) for mlx4_0
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
[Code]....
View 5 Replies
View Related
Apr 14, 2010
Is there a small web installer for Ubuntu server?
View 1 Replies
View Related
Jul 20, 2010
I just installed Ubuntu 10.04 LTS (Lucid Lynx) Desktop Edition Gnome.
I was a Vim user in Windows. I heard that Ubuntu comes with a compact version of Vim called vim-tiny.
I wonder if this latest version of Ubuntu comes with vim-tiny or the complete version (is there any way of checking which one is being opened with the vim command in the terminal?). If it is vim-tiny, how can I install the complete version of Vim and start it inside the terminal with the "vim" command? Because right now vim-tiny (I guess) starts by typing "vim" in the terminal.
will the vimrc of the tiny version interfere with the complete version of Vim?
View 2 Replies
View Related
Nov 23, 2010
i just restarted because of some problems and as i booted, the ubuntu logo with the load thing was looking different and errors appeared under the logo. The resolution is 1024x786, but it was way higher before. When i click on System/Preferences/Monitors it says "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? y/n" I have a broken package: sun-java6-jre, is it because of that?
View 2 Replies
View Related
Apr 4, 2010
I installed the latest version of puppy linux on this Nobilis laptop and I am having a little trouble with the battery. As you can imagine being able to see the battery power left is a bit more then convenience. I am running it frugal install. Is there just a setting or something that I am flat out missing? I used the Hardinfo hardware information tool (A tool in puppy linux) and it also didn't find the battery.
View 6 Replies
View Related
Jun 8, 2011
Only Single core active on quad core AMD when acpi is active.with acpi=offuname -aLinux dvip4 2.6.32-30-server #59-Ubuntu SMP Tue Mar 1 22:46:09 UTC 2011 x86_64 GNU/Linux
Code:
cat /proc/cpuinfo
processor : 0
[code]...
View 1 Replies
View Related
Mar 14, 2010
i download the rpm package of gcc .
View 10 Replies
View Related
