General :: Retrieving Data From Corrupt File System?
Oct 26, 2009
basically the situation I'm in is someone mistakenly expanded an NAS without unmounting the drive on the server. This corrupted the superblock and its apparent that all the backups are no good. The drive in question was expanded from about 800gigs to 1.8TBs, its done via an NAS.
At this point I'm most concerned about getting the files off the drive, I can deal with resetting the file system but I really need those files. This happened within a week of me joining this group so I'm kind of doing damage control here, backups were not taken of this particular drive.
View 1 Replies
ADVERTISEMENT
Feb 6, 2011
I want to cause damage to a file system and then try to restore it. I want to use a VM first and when I've learned a little try it on an old HDD. Any ways to damage a filesystem non physically is welcome!
View 2 Replies
View Related
May 6, 2011
I use Ubuntu 11.04 Natty Narwhal and my wife who is not an Ubuntu convert still uses Microsoft Windows. Recently her ageing PC stopped functioning and she bought a more powerful PC with Windows 7 as the OS. Unfortunately, most of her specialised work software refuses to run on Windows 7, but she still wants / requires access to retrieve information from the old drive which was running (past tense) Windows XP Professional up until recently. Because of her fear of breaking the warranty on her new shiny PC, she won't let me remove the casing and fit the old drive. So, the question is, if I fit her old drive into my Ubuntu machine would it harm either my PC or her hdd? Also, these new SATA drives have no jumper settings (slave/master etc). How do I set it up and how do I get the information from this hdd?
View 2 Replies
View Related
Jun 24, 2011
Why do I keep getting .gvfs (gnome virtual file system) file appearing as corrupt in /~/usr directory, I can get rid of it by unmounting, but it re-appears later on. It is causing problems as it interrupts my backups (which are automated) with an error message,ListError .gtk-bookmarks/.gvfs [Errno 13] Permission denied: '/home/jimt/.gvfs'
drwxr-xr-x 2 jimt users 4.0K Jun 22 22:00 .gstreamer-0.10
-rw-r--r-- 1 jimt users 132 Jun 24 11:50 .gtk-bookmarks
d????????? ? ? ? ? ? .gvfs
-rw------- 1 jimt users 4.3K Jun 24 11:50 .ICEauthority
drwxr-xr-x 3 jimt users 4.0K Jun 23 08:41 .icedteaplugin
View 7 Replies
View Related
Jan 4, 2010
I have an Acer Aspire One running NBR 9.10. A few days ago it "went wonky", wouldn't boot and would just seem to start and then shut off before getting to the logon screen. I managed to boot from a USB stick and run check and fix in Gparted. It found a slew of errors in the file system. Unfortunately, it still won't boot, now it just hangs. I assume some of boot files were damaged.
Now I have two problems:
1. Is there a way to repair the damage? Or just wipe the disk and start over?
2. I need to get my e-mail off of the hard drive. I can mount the drive after booting from a USB stick, but the thunderbird directory is locked. Is there a way around this?
View 2 Replies
View Related
Nov 28, 2010
Yesterday, the file system of my mp3 player went corrupt. So I tried to format it to vfat, which in the past hasn't solved the problem and instead just made another corrupt partition. I have fixed it before by using dereks boot and nuke (dban) and filling it with only zeros so its ready to be repartitioned.
Now this time I tried to save some time by using dd instead of dban.
So I did dd if=/dev/zero of/dev/sdb
The process got interrupted by my system shutting down after about 15 min.
Now when I plug in my usb, it doesn't get recognized. It doesn't show up in gparted or fdisk. I looked at dmesg and all it gave was: usb 1-4: new high speed USB device using ehci_hcd and address 5
View 1 Replies
View Related
Dec 30, 2010
I just got openSUSE 11.2 set up on my home server. The machine has two 2TB HDDs, the first (/dev/sda1) is partitioned thusly:
10GB /
1GB swap
1.82TB /home (/dev/md1 in RAID1 array)
[code]....
View 3 Replies
View Related
Mar 1, 2010
How can I corrupt oracle data block manually using dd command from Linux?
View 2 Replies
View Related
Jul 4, 2011
My laptop was damaged a couple of months ago. Just a short drop from the couch, but it was hard enough to make the HD inaccessible. I took it to a local, respected shop but they couldn't save any of the data and simply installed a new HD after consulting me.
I have the old drive and would still like to retrieve the data, if the price is right. What should I ask about when looking for another repair shop?
View 4 Replies
View Related
Mar 31, 2011
I was messing around with Bash scripting just now and was wondering if there was a way to organize the output of a command into an array. Like the Bash equivalent of the PHP explode() function.
View 3 Replies
View Related
Jun 20, 2009
I have accidentally removed vmware virtual disk, my host operating system is RHEL5.2 with ext3 file system, i have used photorec, magicresue and foremost but still no luck to recover the vmdk file. i have seen in foremost configuration file that there are some predefined files (ex- doc, pdf, jpg, avi, zip, etc),
1. is there any way to add vmdk file extension on that configuration file?
2. if yes how can i do ?
3. by adding vmdk on configuration file, can i specifically use recover option for vmdk?
View 2 Replies
View Related
Mar 23, 2010
I had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.
It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such
Found Disk: hda
Found Disk: sdb
so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on
cyberciti.biz/faq/freebsd-adding-second-hard-disk-howto/
but I'm assuming FreeBSD would work differently and I wasn't totally sure what the labels of the file systems should be.
View 1 Replies
View Related
Jul 6, 2010
I created a pendrive USB Fedora OS, worked fine. Installed a few bits and pieces, but when I used it again most of the files have disappeared (corrupt, deleted?). This happened before, just after I put a load of updates on. I am certain it cannot be rescued, but how can I prevent this (apart from backing up)?
View 2 Replies
View Related
Dec 1, 2010
Recently I was forced to hard reset my computer a couple of times (mostly out of frustration) and due to my idiocy i was confronted with the standard Kernel Panic message at bootup. I tried running an fsck from live cd which corrected a bunch of errors but to no avail (as far as getting rid of the Kernel Panic msg). I then tried to mount the filesystem by accessing it from live cd (and later even installed ubuntu on a small leftover partition to get rid of the annoying live cd lag) but it says that I don't have access to my home or root folder. Mounting from command line gave the same issue.
So now to the question. Is there a general procedure to access data in my corrupt filesystem if it is encrypted?
View 7 Replies
View Related
Apr 27, 2011
I am currently downloading 44Gig of video files and I noticed that Transmission is reporting that I have downloaded 40.5Gigs already with +50MB corrupt.How do I correct the 50MB worth of corrupt data?
View 2 Replies
View Related
Mar 29, 2010
I have heard of a linux based data recovery for hard drives (corrupt) its bootable and once loaded and booted it will scan for drives and show there contents and let you pick and choose which ones you would like to back up/ save to a disk so you can wipe a drive and keep your info but I cannot remember the name of it.
View 5 Replies
View Related
Mar 4, 2010
I have a Hard Drive that has a corrupted file system and i have tried the usual MS Windows fixes, chkdsk and a number of recovery tools inc Dos recovery tools and failed.
The Drive is an MS Windows drive with an NTFS file system.
chkdsk scans and after several hours fixing numerous problems eventually gives up and fails to complete.
The directory "My Documents" contains several GB of data and displays that this is true. When trying to access the directory, access is denied because its corrupt. Using Windows and Dos recovery tools i can view the contents of the directory sometimes! but cannot copy out any of the data, the applications return messages saying no can do basically.
I would like to try to use Linux to recover the data.
Problem number one is i have never tried to add a hard drive to an existing Linux system before, how do i go about adding a new drive?
The 2nd problem is, is there a Linux application that i can use to attempt to repair and recover the corrupt data on this drive or more specifically in the "My Documents" directory.
View 7 Replies
View Related
Feb 25, 2010
I have recently recovered from an HDD failure on my Drobo. One of the disks died and corrupted the entire array (which is not supposed to happen). I have since managed to copy the data off onto smaller disks and after replacing the failed drive, have copied everything back.
Now that im up and running again, i was wondering how this situation would play out on encrypted disks, or in the case of a drobo a large encrypted partition (as you cannot encrypt the entire array).
Would i still be able to recover the data if i were to encrypt it? It is a 4.2TB array, and i assume that I would need to copy the data in its entirety to recover it, so using multiple smaller disks would be out of the question right?
View 5 Replies
View Related
Dec 18, 2010
I accidentally did:
$ strace -o /usr/libexec/dovecot/dovecot-lda -d user
Of course this truncated the dovecot-lda file I was trying to trace down to a size of zero.
Is there a standard way to get this back from the RPM ?
That package has some configuration files I don't want copied over with the original RPM versions.
I am hoping for some nice option to rpm that will retrieve lost files like that and get the permissions and ownerships set right as opposed to brute force rpm2cpio and then manually copy the file into place and then try to figure out correct ownership and perms.
View 7 Replies
View Related
Feb 11, 2010
I had Lenny installed on my Acer Aspire laptop however I've had to try to reinstall it.The installation stops at 'Retrieving file 811 of 811' from the ftp server and thats it.I've tried a few times with the same result and I have done many installs without any issue except for this time.
View 4 Replies
View Related
Aug 29, 2009
I accidentally formatted a HDD when I meant to format a USB thumb drive. The HDD is a 250GB drive that had about 180GB of data in the EXT3 format. I was actually attempting to make a bootable USB thumb drive with TRK (Trinity Rescue Kit). Kind of funny/ironic to mess up a drive while trying to make a rescue disk. Anyway, as soon as I realized what had happened, I pulled the drive out of the computer to make sure I didn't do anything else stupid to it. I have been searching for some way to recover and haven't really found much. There are a lot of programs to get Windows data back, but I haven't seen anything specific on the EXT3 file system.
View 4 Replies
View Related
Sep 30, 2009
I have lost the data of my drive having file system ext3, please tell me the most reliable softwares for data recovery, please try to tell also GUI software.
View 1 Replies
View Related
Aug 28, 2010
Rsnapshot is a software written in Perl to make backup of local and remote file system. The well proven rsync is behind this utility. rsnapshot does not need root user intervention to restore the data of a normal user. It does not take much space in your Backup server. It can be easily automated (scheduled) to make life easier. Just setup once and forget it configuration. Basically it takes snapshot of file system (or a part of) in regular interval such as hourly, daily, weekly and monthly.
This can be configured easily through a simple text based configuration file. The above task can be setup in a few easy steps in a few minutes. Two major tasks are configuring rsnapshot and openssh automatic login. To make the backup automatically, we need to automate the remote login in a secured way. This can be done through openssh tools. This scenario depicts backup of desktop (assuming that IP address is 192.168.0.100) data to a backup server. My desktop runs on Ubuntu 10.04 and backup server runs on Debian Squeeze. [URL]
View 2 Replies
View Related
Apr 19, 2011
I am developing a program in a system where the Linux does not take care of the sync command automatically. So I have to run it from my application always I save some data in the disk, which in my case is a 2GB sdcard. It is true that I can make the operation system takes care of the syncronization, using a proper mount option, but in this case the programm's performance drops drastically. In particular I use the shelve module from Python to save data that comes from a socket/TCP connection and I have to deal with the potencial risk of the system being turned off suddenly Initially I wrote something like that to save data using shelve:
Code:
def saveData(vo)
fd = shelve.open( 'fileName' , 'c')
fd[ key ] = vo
fd.close()
os.system("sync")
But that takes too much time to save the data. Note that I use the sync from the OS every time I close a file to prevent data corruption in the case of the "computer" being turned off with data even in the buffer. To improve the performance I made something like that:
Code:
def saveListData( list )
fd = shelve.open('file_name', 'c')
for itemVo in list:
fd[itemVo.key] = itemVo
fd.close()
os.system("sync")
Thus, first I saved an amount of objects in a list then I open the file and save the objects. In this way I have to open the file just one time to save a lot of objects.However I would like to know if adding a lot of objects before closing the file would increase the risk of data corruption.I known that turning off the system after fd.close() and before os.sync may cause problems. But what about turning off the system after
Code:
fd = shelve.open('file_name', 'c')
but before fd.close()?
View 7 Replies
View Related
May 24, 2011
every-time i try to install, i get this
Error executing command
>>command=C:Windowssysnativecdedit.exe /create/d Ubuntu/application bootsector
>>retval=1
>>stderr=The boot configuration data store could not be opened
The system cannot find the file specified
>>stdout=
View 1 Replies
View Related
Aug 31, 2010
I wonder how to arithmetic operation of our data file using any script program/command (like sed, cut,awk)for example my data.file is:
45 65 42
12 23 61
43 34 21
I want to multiply first column with 2 and add second column with 3 then it become
90 68 42
24 26 61
86 37 21
View 5 Replies
View Related
Jul 24, 2010
I downloaded the first Lenny DVD for amd64, wrote it but on trying the install on my laptop (Gateway NV5389u) I cant get past the installing base system step: I get an error that some files are corrupt / cannot be read from the DVD. I am wondering whether there's a way I can download a minimal version or just the files needed for the base system installation then use the same DVD to install the packages, coz I have a terribly slow internet connection it took me a whole 2 days to download, and I surely cant stand any more of it.
View 4 Replies
View Related
Jun 18, 2010
I have a problem : " bootmgr is missing" It occurs when I plug the SATA 1 TB(data stored with windows file system).
View 1 Replies
View Related
Jul 24, 2010
I am new to shell scripting.What i am trying is to write a shell script which take the input file and output should like as mentioned below.Output file should have data till SOK (marked in red)from every second line and then the selected data(marked in green) from 4th line.So selected data from 2nd and 4th line in one line of O/P file and then similarly selected data from 6th and 8th line in second line of O/P file.Input File:
3c3
< c1111;11.11.11.11;pOK;SOK:abcde;Universe:aa
---
[code]...
View 14 Replies
View Related
Jun 13, 2011
I've just tried to open an .odt file which says it's corrupt and cannot be recovered... The last backup I can find is from about a month ago and is 10,000 words shorter than the corrupt version.I have no idea why the file has suddenly become corrupt
View 3 Replies
View Related
