I have a mixed set of images, each one having a slightly different resolution with a slightly different aspect ratio from the other images.I have tried using commands like:convert -resizeand:convert -cropHowever I can't seem to figure out the correct command to make all images have a width of 1024 and an aspect ratio of 6x4, without causing the image to stretch or get squashed.
View 2 RepliesThis has bugged me forever.....and I mean really bugged me. The 'pixel width' is too low, such that trying to get my mouse to line up just perfectly on the window edge to get the resize icon, is very difficult. After a bit of searching, I discovered Alt F8, which, for those that don't know, is a resize shortcut and works very well, however, I will still use the 'edge resizing' option quite a bit, and would like to widen the 'line' a few pixels. Is this possible in a user settings file, or is this hardcoded? I am learning to develop, so I wouldn't mind looking into this one as a beginning project. If that's the case, could someone point me to the appropriate package?
View 5 Replies View RelatedFor Nautilus I downloaded and installed the nautilus-image-converter. After fresh boot I now have the option to resize and rotate images.
Unfortunately when resizing images Nautilus crashes. Does anyone have an idea how to resolve this?
A couple of days I started using latex and have still one question about the table width. My table is too wide for a page. How can I adjust it so that it fits on the full width of a page? Can I use a command or do I have to specify each column widths by hand?
My table looks like this;
I did try several commands likeextwidth, esizebox, setlength but didn't found the solution yet.
I use ioctl to get the cosole window size (the SSH window).
I use the following code:
When I debug on linux pc, it gives me the correct window width. But after I try it on router (this is my enventual place where my code shall run), ioctl always give me 0 width, that is, numberOfColumnsOfTerminalWindow == 0. but the returnValue is 0 which means that the function call succeeds.
maybe this is something extremely simple and my brains are just mush after a whole night of struggling (and succeeding) with wifi driver issues.i'm running a brand new 10.10 netbook on a brand new asus eee 1015. i am trying to set up my email in evolution and the evolution windows are larger than the netbook screen, which means that the OK, SAVE, etc buttons are outside reach. i tried to resize, move window - resizing doesn't work and it only moves horisontally, not vertically.
View 9 Replies View RelatedI know that ImageMagick's convert program can be used as follows to convert a collection of images -- say, in PNG format -- to a PDF file:
convert *png output.pdf
The problem with this is that each image is then stretched to fit on one page, whereas I would like to keep the original dimensions of the images and put as many as possible on one page in the PDF file before moving on to another page.
I am looking for a simple tool that would allow me to stitch together short mpeg files or to cut out unwanted sequences of files, without having to use a heavy video editing programme like OpenShot.
If it can do the same for audio files (mp3) and possibly convert between formats, even better !
I am just spent half an hour hunting for a thing that should be totally available already:USB install images of Ubuntu, knoppix and all the others.And, the only good way are so far complicated tutorials where you extract the stuff from an CD image. Why??Hasn't everybody notices that CDs/DVDs are vanishing big time? That more and more systems don't have the readers anymore? Instead of following a 10 point instruction list, it would be nice to just be able to download a Ubuntu 8.10 or whatever USB image and be able to beam that DIRECTLY to a USB stick with a dd command.
Or am a missing something here? Does this exist?It should by no means be mariginal, considering how important USB stick in specific and flash memory in general have become.
I just installed Simply Mepis 8.0.15 for a friend but the screen resolution is 800 x 600, how do I change that to 1024 x 768?
View 9 Replies View RelatedHow can I change GTK caret width?
Debian GNU/Linux 5.0.4;
Gnome 2.22.3.
Is it possible to change the width of zmixer??
zmixer eventually uses gtk_vscale but I am not able to increase the width of it.
I'm trying to list all ports less then 1024 on my current machine which are open in the listening state, one port per line
View 1 Replies View RelatedI am logging the output of: top -b -n1 -c so I can keep track of which processes are using how much memory and CPU each minute. When top shows the full command line (-c), the command line text gets truncated at the edge of the screen. This is perfect when running and displaying in a terminal. However, I am sending STDOUT to a file for parsing later and want the full command name logged. Is there a way I can tell top to use a specific screen width? (I know it maxes at 512, that would be fine)
Is there a better way to achieve a similar goal: get periodic stats about which processes are running and how many resources they are consuming?
anyone knows how to change the default width for shell window in Linux(Ubuntu), so that I don't have to re-size it every time I open it up?
View 2 Replies View Relatedtmux shows screen like this:
[code]...
Window has non-maximum width, attempt to copy text from it leads to "" getting in text. How to fix it and get the tmux window full width?
Which is correct?
Code:
Or
Code:
I got these in two web sites.
From emacs window:
How would to get info about it in emacs documentation/manual?
i have both windows XP and suse linux installed in my hp pc with monitor HPL1710. when i in stalled Scientific LInux (cern) in the unallocated space using default partirtion it is in stalled. unfortunatately i have choosen the screen resolution to be 1600*1400. So when i try to reboot it says:
Code:
Input signal out of range change settings to 1280*1024-60Hz I have no idea what to do ? I dont find any scientific linux sub forum . so i am sending the thread here.
What If I wanted to scan a string like the following...
[Code]...
Anyhow just one giant string that's longer than my screen's width. If I simply copy and paste that string after a grep command, it seems that the terminal inserts newlines at the terminal's width and therefore not the whole string goes in. Even if I insert a quote before the beginning of the string and then paste it in, terminal still reads in a newlines somehow and obviously says command not found, etc.
I'd like to widen the width of the standard vertical scrollbar in firefox 3.6 or above. I know now that it is not an edit in about:config and appears that you have to edit in user.js, prefs.js, or in the Profile folder but I 3 prefs.js in my profile folder -
prefs.js
prefs-1.js and
prefs-2.js
Secondly, I cannot find the user.js file. its location if it is still a viable file to edit. which (or what) prefs file I should concentrate on for this edit.
Plainly, it shouldn't be this tough to adjust the vertical scrollbar width, in a perfect world it would be adjustable though Windows. Anyway, this old fart's having difficulty grabbing that scrollbar.
My task bar is quite broad. so when ever i open more than 6 windows at a time then the task bar adjusts the tabs in two row. how can explicitly specify the width for those tabs. so that they all fit in one line.
View 1 Replies View RelatedWay back from Windows 3.x days to the latest 64bit Windows 7 (classic/standard theme)there is a way to make the window edge border wider then 1 pixel.I often use 3 to 5 pixel to make it easy to grab on hi-resolutions displays and hi DPI monitors.There doesn't seem to be an easy or obvious way to do this with the Gnome X-Windowing system?
View 3 Replies View RelatedI am running Linux from a DVD, not installed. I am not good with installing software, but since the DVD cannot be corrupted, I am content to operate this way. Lately, I have been having problems that previously did not occur. When I try to click on the checkbox to get rid of emails, it doesn't register in most cases, or when it does, I am clicking multiple times so it registers twice, meaning it is unchecked again. Even more frustrating is some issues that are affecting my ability to update my business. I am trying to modify spreadsheets (text not calculations).
Whenever I try to click & drag to select something to change, it keeps jumping around to select only some of what I want, something else or some combination of the 2. When I try to copy and paste several fields from 1 column to another, everything from the several fields in the source column ends up together in the last field in the target column. I am also trying to download some images from a website. There is a single column of links to the images. I have to click on the link to get to the image in order to copy it, then back out to continue looking for more links to do the same.
My computer keeps jumping back 2 steps, then forward 2 steps, and sometimes I lose my place in that list. I could deal with it if it were a small number of links, but this is a list of probably close to 20,000 links. Again, i am operating off of a live DVD so this should not be corruptible, but this has just started happening, and has been an issue the last several sessions.
using the update maneger to update on ubuntu new linux images available 2.6.31-17 generic and after the download is complete both images exist in the grub menu should i remove them ? or just remove them from the boot menu ? and if so how could i do each.
View 6 Replies View RelatedIn Linux when we resize the partition with the logical volume(LV), how is the inode adjusted?
View 1 Replies View Relatedresizing partitions with gparted
tools for resizing linux partitions under RHEL 5.5. ALSO what precaution we can take before resizing the partitions.
I have slackware 13.1 installed on my desktop and I have all my hard drive dedicated to it. But now Im thinking about resizing my hard drive so that I can install windows so my brother can play games on it ( probly giving 50 Gigs to windows )I heard that parted ( located on slackware cd 1 ) is what I should use. So I was wondering if I need to backup any important files before doing the resizing? I would also appreciate it if someone could link an good tutorial for doing partition resizing .
View 2 Replies View RelatedI had window system on the other side of the HDD before. Now it was down and I dont want to repair and use it anymore. I want to format it and resize the linux system. How do I do?
View 10 Replies View RelatedThe following is what parted print outputs:
(parted) print
Model: VMware Virtual disk (scsi)
Disk /dev/sda: 26.8GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[Code].....
I want to resize my swap partition /dev/sda2 to use 1GB out of the above space. How can I achieve that?
First of all, the boot device is an 16GB SD card. I install Citrix XenServer on it but I make the partition too small (XenServer makes a lot of logs file). I resize the partition but now it give "Illegal OpCode" and red screen everytime it boot.I already create the image of the whole SD card using dd and already try these process three times = restore the image, test that it can boot properly, then resize the partition using gparted, then it can't boot.
I already post this question in XenServer forum (with screenshot) but nobody answer there.The hardware itself is HP Proliant ML350 G6 with internal SD slot.