OpenSUSE Install :: 11.3 Can't Dmraid - Stuck At Search For Partiton
Jul 23, 2010
i ve run into problems while installing 11.3 x64. Installer stops at search for linux partitions... to solve it i ve had to go back to 11.2. Anyway, i have installed 11.3 on another hdd (3hdds in raid 5 had to be disconnected). When i go into partitoner (11.3) and device graph, i see two of three raid hdds ok with sda1, sda2.... but the third one is without any partitions./ if i do the same in 11.2 all three hdds are with all partitions in that graph. Anyone know the solution except not installing 11.3? .)
View 2 Replies
ADVERTISEMENT
Jan 11, 2010
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
View 9 Replies
View Related
Nov 13, 2010
1) Use INSSERV to start DMRAID
2) Use MKINITRD to create a new INITRD file which loads the DMRAID module.
Neither solution showed any detail of how to accomplish this, and which files to edit or what order I should use to tackle either. With the second solution, I have another SUSE 11.2 installation on another hard drive. Would it be ok to boot into that and create a new INITRD with DMRAID activated, or would it be better to break the RAID-set boot into one of the drives and create INITRD for that RAID 1 system, then recreate the RAID-set? The only issue I would see is that fstab, device mapper and grub would need the new pdc_xxxxxxxxxx value, which can be changed from the second installation.
My system is:
Asus M4A78T-E with fakeraid SB750 controller
AMD Black Edition - AMD Phenom II X4 3.4 GHz Processor
2 x Samsung 1TB drives
Suse 11.2
I have Windows XP on another hard drive purely for overclocking and syncing the 1TB drives, but I can't actually boot into the SUSE system until this issue is sorted out.
View 9 Replies
View Related
Jul 4, 2010
i have 2 partitions on dmraid. I am not able to configure them to mount with yast; yast partitioner gives an error stating that it can't mount a file system of unknown type. I am able to start the dmraid devices manually and mount them manually.
See bug:
https://bugzilla.novell.com/show_bug.cgi?id=619796 for more detailed info.
View 2 Replies
View Related
Apr 22, 2011
I'm pretty new to FakeRAID vs JBOD in a software RAID, and could use some help/advice. I recently installed 11.4 on a brand new server system that I pieced together, using Intel RAID ICH10r on an ASUS P8P67 Evo board with 2500K Sandy Bridge CPU. I have two RAIDs setup, one RAID-1 mirror for the system drive and /home, and the other consists of four drives in RAID-5 for a /data mount.
Installing 11.4 seemed a bit problematic. I ran into this problem: [URL]... I magically got around it by installing from the live KDE version with all updates downloaded before the install. When prompted, I specified I would like to use mdadm (it asked me), however it proceeded to setup a dmraid. I suspect this is because I have fake raid enabled via the bios. Am I correct in this? Or should I still be able to use mdadm with bios raid setup?
Anyways, to make a long story short, I now have the server mostly running with dmraid installed vice mdadm. I have read many stories online that seem to indicate that dmraid is unreliable versus mdadm, especially when used with newer SATA drives like I happen to be using. Is it worth re-installing the OS with the drives in JBOD and then having mdadm configure a linux software raid? Are their massive implications one way or another on if I do or do not install mdadm or keep dmraid?
Finally, what could I use to monitor the health and status of a dmraid? mdadm seems to have it's own monitoring associated with it when I was glazing over the man pages.
View 9 Replies
View Related
Mar 26, 2010
how do i install a linux distro that doesnt natively support Intel fakeraid, using dmraid and a livedisk. the raid is already setup, its just that backtrack cant find it because it doesnt have the right software.
View 2 Replies
View Related
Nov 27, 2010
I have two Ubuntu 8.04 servers currently. I've purchased some 500 GB hard drives and a RAID cage just yesterday and plan to change my current servers to using RAID1 with the hard drives. Much like everyone else, I have the nVidia RAID built onto the motherboard that I plan to use. There are many how-to's out there on how to setup RAID using dmraid during the install process - but what would a person do if they are simply changing over to a RAId system? I installed dmraid a few days ago on the server. It seems that even though I have RAID shut off in the BIOS, it saw the one and only drive as a mirrored array. When I rebooted today, the server would not start; it had ERROR: degraded disks.. bla bla. Then Grub tried to start the partition based off the UUID of the drive (which was not changed) and it said "device or resource busy" and would not boot.
This problem was corrected by going into the BIOS and turning on RAID. When I rebooted, the nVidia RAID firmware started and said degraded. I went in there and deleted the so-called mirror keeping the data intact. Rebooted, disabled the RAID feature in the BIOS and then the server loaded normally with a message "NO RAID DISKS" - but at lest it did boot! So this leads me to believe that trying to turn on a RAID-1 array (just mirror between two disks) may be a challenge since I already have the system installed. I will be using Partimage to make an image of the current hard drive and then restore it to one of the new drives.
The next question is - is it a requirement that dmraid is even installed? While I understand that the nVidia RAID is fake-raid - if I go into the nVidia RAID controller and setup the mirroring between the two disks before I even restore the files to the new disk, will both drives be mirrored? However, I do think that I'd probably have to have dmraid installed to check the integrity of the array. So, I'm just a bit lost on this subject. I definitely do not want to start this server over from scratch - so curious to know if anyone has any guidance on simply making a mirrored array after the install procedure, what kind of Grub changes will be needed (because of the previous resource is busy message), and whether installing dmraid is even a requirement.
View 9 Replies
View Related
Oct 11, 2010
I've googled my problem but I'm not sure I can find an answer in layman's terms. So here's my noob, simple question, please answer it in semi-noob-friendly terms I've been trying to install ubuntu for a while on my desktop pc. I gave it another go with 10.10 but I always have the same problem:
I've got two raid sets connected to an ich10r chip and they work fine in windows (2 samsung 1to + 2 raptors 75gb). Upon installation, dmraid only sets up the first raid set (Samsung array) but not the second one (Clean raptors intended for ubuntu). I don't have any other installation option, all my sata connectors are unavailable. So, is there a manual install solution? Can I force dmraid to mount the second raid set and not the first one? I think I read somewhere that this was a dmraid bug, but I can't find it anymore.
View 8 Replies
View Related
Oct 4, 2010
I can't get my usual gui now. I had videocard problems which I was attempting to solve by uninstalling the proprietary ATI driver. While doing this the card failed completely and I had nothing on the screen at all. So I had to shut it down by killing the power. I now have a new video card in the machine but I've lost KDE. I'm not sure how it happened but when I tried to log in I was presented with the login screen one usually gets when you choose to log out of your account after a normal boot up using, in my case, KDE.
Logging in normally in that screen as my usual user didn't work. It simply went back to the login screen after a few seconds. But this screen also gives you various options to log in that aren't KDE and I chose one of those. I don't remember which. It sort of worked. I get a small cli window in the upper left corner of the screen. However, I can start programs from there, including Firefox, which I'm using to post this. I have the gui within those programs. How do I get my usual KDE gui back? I'm using 11.3 and an ati 4350 card.
View 9 Replies
View Related
Dec 25, 2009
I was able to login until i did change some appearence settings.Now I cannot do anything.. I cannot find anyway except uninstalling it
View 9 Replies
View Related
Apr 6, 2010
I logged out of KDE and started a new session in IceWM just to check it out. When I logged out of IceWM my system crashed and I had to restart. Now it logs in automatically to IceWM. If I log out of IceWM it crashes and I have to hard restart it. When I log out of IceWM it just shows a messed up nvidia logo.
View 1 Replies
View Related
Aug 25, 2010
I have had to reinstall SuSE 11.2. After its successful completion it got into a strange situation: the boot loader identified a boot record on the hard drive and displayed the appropriate message on the screen - but then nothing happened. When I restarted the system with the live CD and chose "boot from hard drive" it got to the normal boot menu without difficulty. I have no idea why the second method succeeds while the first fails
View 3 Replies
View Related
Jan 20, 2011
I was able to login openSuSe/KDE. Now, every time I enter my username and password the system hangs half-way through the Boot Logo.
View 4 Replies
View Related
Mar 23, 2011
11.4 Boot Freeze That is there is a BUG: soft lockup - CPU#0 stuck message and the boot hangs.The modprobe/migration codes are not identical with the linked thread. I'm stuck with CPU#0 at [modprobe:138] and #1 stuck at [migration1:8]. Generally after 61 or 63s.
This is a zypper dup from latest 11.3.The machine boots with acpi=off, luckily. But I'd like to have it all working.The forum says I can't post attachments; hwinfo output seems a bit copious to quote inline. But I'd be happy to provide any additional info obviously.
View 5 Replies
View Related
Jan 8, 2010
i'm new to linux, i installed fedora 12 first. These are my partitions
Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
[code]...
View 9 Replies
View Related
Mar 10, 2010
In the process of installing 11.2 over 10.2 everything goes fine until I reach a login screen. There I provide my previously supplied username and password and the result is logon failed. I have tried the install several times. The result is always the same.Login also does not work from console. Some surfing has provided the suggestion that the old Grub may still exist on the machine. If so, how do I get rid of it?
View 8 Replies
View Related
Mar 23, 2011
I cant seem to get Opensuse 11.4 to install I am stuck using a USB drive but using the imagewriter program that Suse provides to do a usb installation. Everytime I try to install i get LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE and some I/O error also if i DO the Check Disk thing its always perfect. Not sure it thats because im using usb.. idk.
View 9 Replies
View Related
Nov 5, 2010
New install on Compaq Presario F700 (F756NR)The install went fine. I was able to get the Nvidia drivers working too. The problem I have is when the system boots. I get the OpenSuse splash screen, and the system just hangs.I found that if I press <Esc> and hit <Enter> a few times, the system will eventually boot. I also found if I wiggle the mouse during the splash screen, the progress bar will begin to move, and the system will boot.Seems to be something about detecting hardware during the boot phase, and it seems to be input related.
My Computer
Folders, Harddisks, Removable Devices, System Information and more...
Disk Information
[code]....
View 9 Replies
View Related
Nov 23, 2010
I've tried to install opensuse in a dual boot with xp. I've got an extended partition with root home and swap and primary partitions for xp and boot. The installation freezes at 92% while installing the bootloader, I've tried installing from cd and from usb, with or without boot partition and nothing changed.
View 3 Replies
View Related
Dec 28, 2009
As I type this, I'm waiting (and waiting) (and waiting) for the Repair Tool Box, "Search For Lost Partitions" tool to stop running off of the install CD. I didn't actually mean to do that (I meant to select "repair file system!) and I don't see any way to abort it! How to I make it stop? (You can insert your best Deanna Troi voice there, if you like: "make it STOP!") Or do I just wait until sometime next week for this rascal to finish examining a THREE HUNDRED GIG partition, byte by byte . .. ?
View 3 Replies
View Related
Feb 9, 2010
I downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
[code]...
View 9 Replies
View Related
Jul 19, 2010
OpenSUSE 11.3 x86_64 Live USB disk only one HDD with OpenSUSE as the only OS.the HDD is fine so i know it is not a hardware problem.this is different from my other (grub) problem as this is a different PC.the installer has been stuck for over an hour at 92%/Saving Bootloader configuration.maybe i can try the installer in text mode to get more info? is there a text mode for the installer?
View 9 Replies
View Related
Sep 16, 2010
i trying to recreate(after zero-superblock) raid 10 but get stuck with near=1, far=2 layout, how i can setup this layout using mdadm.
View 2 Replies
View Related
Feb 9, 2011
I have SUSE 11.3 on an Acer Aspire 3620 (laptop). When it boots up, it gets stuck and doesn't complete the process. Can't use safe boot either because I can't get past the login- when I type the password, no keystrokes appear, regardless of the key I strike. Here's how I got into this situation and a little more description of the problem. After my laptop got some nasty bugs that damaged Windows XP so badly that I couldn't use the rescue disk (that I so obediently made per instructions), I bought several linux flavors on Live CD/DVD and decided to go with SUSE. I had been using the Live DVD for about a month and everything worked well so I installed it last weekend (SUSE only -no dual operating system). Everything went well for a couple of days and I even used Yast to get Adobe Flash. Then I plugged in my MP3 Player to recharge it and quirky things started happening.
Once, the computer went in to standby and I couldn't get to the login screen - I started pushing all the keys and something worked. That evening I closed the laptop (so it should have gone to suspend) with the MP3 player attached still, and pulled it out, probably as the computer was going through the motions or shortly thereafter. (My player and usb stick suffer no ill consequences if not ejected properly.) Since then I have not been able to boot up. I powered down several times and tried. It seems to start normally with the green screen and little reptile appearing as the monitoring bar grows. Then it goes black, except the cursor's spinning wheel indicating activity. Then comes back to the green screen, with the bar still increasing and nearly making it to completion. Then the black screen and cursor-- forever. Eventually I can hear that the harddrive is no longer spinning.
Also, when the black screen appears, there is an error message that says that the configuration settings for Gnome Power Manager were not installed properly, which I highly doubt since I had no trouble in the installation, but maybe that is pointing the right direction to the problem. Anyway, now I am back to Live DVD, so that I can surf for the answer to this problem. Least that works! Before installing, when I was using SUSE as a live DVD, it sometimes was a little quirky when I inserted the MP3 Player and USB Stick- sometimes wouldn't recognize them, sometimes would, sometimes wouldn't/couldn't unmount. Firefox also would start crashing after alot of use, but I could reboot and things were fine, so I thought this might just be due to the fact that it was Live and not Installed.
I installed it with the default, KDE. I read another post somewhere with a similar problem in which the author says KDE is very bad with inserted media but I wouldn't know if that's true or not. This is the first time I've used linux, apart from a little bit of experience at work. It really has it's ups and downs, when it was working, it was so exciting, when I got hung up so soon, disappointing. The only thing I can think of to do now is reinstall and tip-toe around being extra careful about the quirks when connecting devices. Not very practical though. Thanks for listening to this long story. Will be trying to get it fixed in the evenings after work EST.
PS IF you can bear to read another line. The live DVD I bought was rather badly scratched and scuffed in my opinion. Although there were no installation errors that I could see, would this have had an unknown immeasurable effect that could account for weird behavior?
View 5 Replies
View Related
Jun 12, 2010
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
View 1 Replies
View Related
Oct 18, 2010
I have a HDD that has 2 partitions. the 2nd partition is the VG and I want to reduce its size. I have reduced the Largest LV in the VG and now have free space in the VG. But, I am clueless on how to proceed to reduce the partiton size so that I can use it for another need.
When done, I expect to have 3 parttions total on the HDD. But first, I could some help in understanding the steps necessary for me to take, to move the free space out of the partition that has the Volume Group. Then, i can use fdisk on that 3rd partition for my needs.
I already know how to expand a Volume group by adding PVs, but, I do NOT know and cannot find how to reduce it to recover the free space in the VG to be used in a new partiton. (Better explained..."I want to reduce the physical partition size that the VG represents.)
View 5 Replies
View Related
May 9, 2010
I've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers.I've used help from the official site http://www.fs-driver.org/and this tutorial http://www.dedoimedo.com/computers/l...s-windows.html
It's a straithfoward proces so I dont understand what I did wrong.I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04Also the partition is mounted at /home, so I dont know if that makes any diferance.
View 3 Replies
View Related
Sep 9, 2010
how do I mount a SafeBoot encrypted Windows partition on Ubuntu (10.04)?I have tried all thesemount -t ntfs /dev/sda1 /mnt/windowstried changing fstabtried changing grub.cfgI also installed ntfs config tool but it doesn't detect the windows partitionbut sudo fdisk -l show me the windows partition on /dev/sda1
View 2 Replies
View Related
Sep 21, 2010
I have a Dell Inspiron 530 with onboard ICH9R RAID support. I have successfully used this with Fedora 9 in a striped configuration.Upon moving to Fedora 13 (fresh/clean install from scratch), I've noticed that it is no longer using dmraid. It now appears to be using mdadm. Additionally, I need to select load special drivers (or something close to that) during the install to have it find my array - which I've never had to do before with F9. While the install appears to work ok and then subsequently run, my array is reporting differences .. presumably because it is trying to manage what mdadm is also trying to manage. More importantly, I can no longer take a full image and successfully restore it as I could with the dmraid F9 install. Is there anyway to force F13 to use the dmraid it successfully used previously?
View 1 Replies
View Related
Apr 2, 2011
After uprading to 11.04 b1 i cannot activate my softraid. It still works if i boot 10.10 live CD
root@bisley:/home/goblin# dmraid -ay
RAID set "pdc_dhifadccdc" was not activated
root@bisley:/home/goblin# dmraid -s
*** Set
[code].....
View 9 Replies
View Related
