Does anyone know if it is possible to set up Postfix to receive all email coming to mydomain.com and forward them to 2 different spam filters? All mail needs to go to both spam filters then onto our Exchange server
View 1 RepliesI have a RHEL 4.5 with Postfix 2.2.10 configured as a smart host for an Exchange 2003 server. Its been running well for three years like this. We have some users that are configured with alternate SMTP addresses for a secondary email domain in Exchange. One user is not getting his email for the secondary SMTP. All the others are. After some digging, the maillog indicates Postfix is not relaying his email to Exchange but to the Postfix local mail folder under /var/spool/mail. What in the configuration would cause this? His email is in the relay_recipients file as the others are.
View 1 Replies View RelatedI'm new here and I'm sure this question has been thrown around a lot but I just couldn't find a solution. I have a networking website I've setup and we need to send notification mails to our members depending on activity related to their profiles(messages, comments etc).We are hosting the site on Centos5.6 with VirtualMin and are using Postfix as our MTA. We also use google apps for email on the site. Heres the problem, the mails go through for some gmail users but more often than not, they end up in gmail,hotmail and yahoo spam.We've setup the appropriate SPF codes on the server, DKIM and rDNS works fine.v=spf1 ip4:xx.xx.xx.xx a mx include:_spf.google.com ~all Below is a sample email that goes directly into gmail spam. I've replaced the actual values with dummy text (Ip, Domain etc)
Delivered-To: my.email@gmail.com
Received: by 10.143.165.5 with SMTP id s5cs223598wfo;
Fri, 15 Apr 2011 08:38:22 -0700 (PDT)
[code]...
I have an issue with postfix and my server.One account (mine) is not considered as spam by no one. But all the other users are treated as spam by yahoo, and hotmail. And I can't understand why.Here are the header from one user who sent an email to my yahoo account (treated as spam):
Code:
From userNAme Sat May 22 01:52:27 2010
X-Apparently-To: me@yahoo.ca via 98.136.183.25; Fri, 21 May 2010 14:52:55 -0700
[code]...
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
[code]....
I have a setup wth postfix, dovecot and sasl. It is setup to relay all my email through my gmail a/c mainly because my port 25 is blocked by ISP. I just setup postfix and dovecot with ssl/tls and according to docs I read it will now be connecting on port 465 for smtp. If I need to test if my setup is working do I need to change anything anything other than commenting out the relay line in main.cf. Am hoping I don't have to deletehe sasl_password file in case I need to revert back to old setup.
View 4 Replies View RelatedI'm having a problem with a new install of postfix... it won't relay mail to external domains. Internal mail is fine.I'm using virtual_mailbox_domains so that I can have multiple domains, and I've set dovecot to use local files with encrypted passwords.Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]....
I use filters for the incoming messages, based on the subject. I wanted to know if I could give several keywords at once just by filling one field. I want the filter to place the message in a folder if just one keyword fits. How could I fill the field <subject> <contains> and separate my different keywords, saying that it's not an "and" but an "or".. I tried like that:
<subject> <contains> : x | y | w | z
<subject> <contains> : x ; y ; w ; z
<subject> <contains> : x , y , w , z
but none of these worked. Is there a way or should I create several and same conditions for each different word?
Does any one know a way to make the filters in Thunderbird permanently delete filtered mail? I tried "Mark Read" then "Delete" (or "Move to Trash") then "Delete". But most of them do not get deleted out of the Trash. I have had the same address since about 1997 and there are certain spams I know I will get every day no matter what and I would like them gone for good. I know I could just Empty the Trash but I sometimes search for things in there, and it has come in handy having all those emails.
View 3 Replies View Relatedi have setup mailrelay using postfix and relay email to exchange server. The problem is how can i relay email to multiple exchange server. For example: -
domain aa.bb.com relay to exchange server 10.10.10.10
domain 123.test.com relay to exchange server 192.168.10.5
My postfix server has been working great for the last 1-2 years. Lately the number of spams encreased (from 1-2 every day to aprox 8-10 every day per domain for some domains ).I post here the output of postconf -n. Maybe someone gives me some advices about what cat I change or how can I optimize. I must recognise that I don't fully understand details of how postfix and all the restrictions works together, but I will document every advice.
View 4 Replies View RelatedVery new to Ubuntu and Linux so this may be a simple one. I've recently setup an Ubuntu Server 10.04 box as a mail relay running Postfix and Amavisd-new (Spamassassin & ClamAV) and this has been working really well. I started to get a few emails through today with the following header[URL]..(removed domain name) The name's always in quotes and random. The fqdn is that which I configured in postfix as $myhostname. I can't figure out how this address is being used. This box is only used for incoming mail and acts as a relay to Exchange. Exchange doesn't send out through it. The only thing that may be going outwards is bounced messages from Exchange which are almost exclusively to linkedin.
The fqdn isn't public. This box isn't even part of our internal domain, it's just named that way with manual DNS added. Anyone seen this before? Will this header have been part of the message when it arrives at postfix or could this have been added by postfix itself?
I have postfix installed for a while now. It seems as though my server is sending out spam to other people which is really bad...I got emails like this one:
Code:
Delivered-To: email@provider.com
Received: by 10.223.107.17 with SMTP id z17cs2705fao;
[code]...
I have set up a couple of postfix servers for my domains, but the only thing I am missing now is this: How to block the public sending mail from my email to my email? I have managed it with SPF, but surely there must be a better way, that returns "relay not allowed" to the client. The SPF method costs too much, since it must make a dns request for each mail. So far, I have not gotten many of these mails, unless when testing my mailserver, but as I see it, anyone should not be allowed to send mail from abuse@mydomain.com to abuse@mydomain.com.
Somebody must have thought about this a long time ago, and there is simply that little line in main.conf that I'm missing.. My setup is this (virtual): I have a primary mx, with postfix, courier IMAP/POP3 server, a user database, and sasl via saslauthd. I also have a secondary mail server (backup mx) with no sasl auth, but with a copy of the mail users in the virtual tables, but added as relay_* users instead.
Spamassassin and SPF testing is replicated too, so most of the stuff should work, but I simply cannot find a setting in Postfix that denies someone to mail FROM my address TO my address. When mailing from my address and out in the open, they are required to authenticate, but not when using one of my my domain addresses, and also targeting my domain addresses.
As said, It is possible with a strict SPF setting, but that is at a cost for every lookup. It would be quicker for postfix to lookup the sender and the recipient in the relay/virtual tables, and deny if both addresses were in the recipient tables, and sender is not authenticated.
i keep receiving this damn annoying spam: Quote: No Cost Website Analysis and Ranking Report Rank mysite.com at the top of the 3 major search engines Do you want to know why your competitors are showing up at the top of the three major search engines and how you can rank on top? To increase the number of visitors to your website it is crucial that you have a top search engine position. If you are like most people, you will spend countless hours trying to get traffic to your website.
Our search engine optimization experts will run a detailed website ranking and analysis report showing you exactly where mysite.com currently stands in all the major search engines along with the recommendations of how we can increase your ranking on Google, Yahoo and Bing. For Your No Cost Analysis Report and More Info Please Click Here
[Code]...
i get about 30 of those a day, everyday, for a long time. ive asked the ISP to stop it (theplanet.com) they are not responding and the spam continues. i was thinking is there a way that i can tell postfix to reject emails that contain "No Cost Website Analysis and Ranking Report" in their subject? there must be a way but i dont know how.
It's possible to configure Postfix in order to check spam only for outgoing email?
View 2 Replies View Relatedso i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View Relatedhow to defend from spam mail, actually i used centos. i want to absolutely block spam, my Mailscanner running ok but the spam still run off to my server. i do everything from tuning mailscnnner, spamassassin, amaisd-new but spam still send to user 10-20 per days.
View 3 Replies View RelatedI had setup postfix and spam assassin, and in my environment, I forward the incoming email to my exchange server.
Everything works now, in my mail box, I can receive the email with subject ******SPAM*****. but is there a solution, when spam assassin finished the scan and mark spam, if the score is very high, may be stop to forward it to exchange, for example, send it to a special email box?
I followed this How To (https://help.ubuntu.com/community/Postfix) in order to add smtp authentication to my Postfix installation used as spam filter for my exhange server, and it'seem all ok; the only thing that I don't understand is where I list all the users (with passwords) that I authorize to send mail through my server...
View 3 Replies View RelatedI've got a web server that's hosting a few sites, and there are a few WordPress instances with these sites. With Wordpress, whenever a user registers with the site, they receive an email.With my server, it sends mail via Sendmail. This is all fine and good, except no matter what, it's flagged as spam. Is there any way to correct this?Keep in mind that this isn't a mail server, and the only reason the server ever sends mail is for new wordpress users and password resets.
View 8 Replies View RelatedI have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
View 1 Replies View RelatedI am new comer in this forum and the beginner on freeBsdI have a problem on how to implement the spam filter program on mail server, the problem is i have no idea on how to implement and test the spam filter program on the mail server and where should i put the program? is it in pop3?
View 3 Replies View RelatedI need help with header_check filter on postfix. In the last week mail users received a spam e-mail without subject line and I don't know what is the way to reject this. This is the example of message header:
From: "example@example.com"
Date: September 16, 2010 9:07:43 AM GMT-04:00
To: <example@example.com>
I want to reject e-mails that don't have Subject line
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
The scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
[Code]....
I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
View 6 Replies View Related