General :: Mouse Button Gets "stuck" Down In VMWare Guest OS?
Jun 23, 2010
I'm using 64-bit Fedora 13 on 64-bit VMWare Workstation 7.1 (on Windows 7 Pro) and I'm having an issue with the mouse button. Everything works just fine unless I click and drag off the guest OS window (which accidentally happens more often than you'd think). When I do this, the "button" gets stuck in the down position and there's no undoing it. Resetting the session does not fix the issue - I have to reboot the VM. I do not have any accessibility features turned on.
Obviously, this is kind of a pain. Does anyone know of a solution?
View 1 Replies
ADVERTISEMENT
Jan 2, 2011
I am running Vmware server 2.02 on a Windows-7 host. Also I have installed Debian Lenny as a guest on top of the vmware server.
I have installed Vmwaretools, the screen resolution is fine but the mouse pointer movement isn't smoothly. Side effect: When I move the pointer from the Windows-7 host into the debian desktop windows, the pointer stops at the border for a while and then jumps at ones to the middle of the window.
I have the same problem with squeeze-32-kde-4, lenny-kde-64, lenny-gnome-64. I do not have this problem with Suse linux 32-kde4. When I move the pointer over the windows border, the chape of the pointer changes ( windows > linux ) and the movement is fluently without any interuption.
View 2 Replies
View Related
Oct 3, 2010
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
View 12 Replies
View Related
Jun 2, 2010
I'm happily running Fedora 13 as a guest OS in VMWare 3.0.1, except that it has one little issue.Sometimes the mouse would get terribly confused. It generally happens when I hit the mouse scroll wheel or when I move a window around very quickly. After that the left mouse button would stop working...
Anyway I found an easy workaround which I thought I'd share.Just hit 'enter unity' on the VMWare player menu. Then you can immediately exit unity again. This somehow resets the mouse into its normal state...
View 12 Replies
View Related
Mar 17, 2011
I know how to make another button act as the middle button but how can I map several mouse buttons to the middle button? xmodmap complains if I repeat button numbers in the pointer option.
View 2 Replies
View Related
May 8, 2010
Command to get guest information in Vmware ESX?
View 1 Replies
View Related
Apr 14, 2010
i just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies
View Related
Jul 28, 2010
My RHEL version is Red Hat Enterprise Linux AS release 4(Nanhant update 6) I installed Linux on vmware.My host is win xp.Am able to ping guest as well host.How i can copy the files from host to guest.
View 2 Replies
View Related
Dec 29, 2009
I am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
View 5 Replies
View Related
Dec 23, 2010
I have 4 VMs on a Linux host, call them A, B, C, D running on Z. I really don't care when A and B come up, but I would like to make sure that D comes up before C.I believe that in VMWare 2.x it's possible to change the boot order. Is this possible in 1.x as well? Is this done in /etc/vmware/vm-list? I see that there are a number of VMs listed there, including some that have long since been deleted.
View 1 Replies
View Related
Apr 28, 2011
Could you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
View 1 Replies
View Related
Sep 18, 2009
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
View 5 Replies
View Related
Jan 28, 2010
I have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version.
everything works fine on Linux host
I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc.
I tried setting MTU and TCP window size on Windows lower, but did not help
View 2 Replies
View Related
Apr 12, 2010
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies
View Related
Aug 18, 2010
I was doing some thing on networking on virtual machine (rhel 3 as guest os) and winxp as host .. now when i started my guest os (linux) the login page letters (like username and password) size became very large so that i could not see them (crossed the screen) .
View 1 Replies
View Related
Apr 1, 2011
While searching the net I found how to complete disable the functionality of the middle mouse button but I need this button for many other uses.I want to disable only it's paste action.
View 2 Replies
View Related
Jan 4, 2011
I just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
View 1 Replies
View Related
Sep 15, 2015
CNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20.
The only avalible resolution is 1600x900.
/etc/debian_version 8.1
GNOME Terminal 3.14.1
xnee 3.19
View 0 Replies
View Related
Mar 26, 2011
I am COMPLETELY new to Linux.I started a computer class recently and I started teaching myself PERL.My teacher had mentioned to me that it's far better for some reasons (he did not elaborate) to write code in a Unix system. So I got Ubuntu 10.10.I installed it along side my windows 7.After I setup my windows (had to reformat the disk) I decided to boot up into Ubuntu to set that up. I installed the necessary drivers that it required, and the updates. I was asked to restart the system so I did so.
It did not even shut down or restart my system.I waited patiently 15 minutes...30 minutes 1 hour... until I finally decided to hit the reset button on my PC. Then when I'd boot back in to Ubuntu afterwards, it would stay at the log in screen and my mouse wouldn't budge and nor is my keyboard recognized by Ubuntu.Im really frustrated and I've been searching for answers for the whooole day and I just can't seem to find something well explained. Im completely new to Ubuntu so I don't know where to enter any code in a cmd line or such.
1)Reformatted my harddrive to install windows 7 on it
2)Set up windows 7 and then booted into Ubuntu.
3) Set up Ubuntu and installed necessary drivers and updates
4) Reset the computer and waited for an hour for the reset to happen but nothing happened.
5) Manually reset my pc and booted into ubuntu
6) Stuck at log in screen with mouse and keyboard not functioning (unable to use ubuntu).
View 2 Replies
View Related
Jun 23, 2011
1) check if a mouse button is pressed down. I need to check this status of mouse button again and again inside a loop. Depending on the status, some function will be called. OR
2) check if some key of the keyboard is pressed down. I need to check this status of 'key' again and again inside a loop. Depending on the status, some function will be called.
Either of the two above will serve my purpose.
I am using Ubuntu 10.10.
View 4 Replies
View Related
Nov 25, 2010
I just bought a new mouse - just a cheapie usb wheel mouse but it has an extra 'thumb' button which I thought I might as well set up to do something useful. I used 'xev' to determine the numbers that the OS had assigned to the buttons, and I found it wasn't quite what I was expecting:
left = 1
wheel-as-button = 2
right = 3
wheel-up = 4
wheel-down = 5
thumb = 8
I thought the right button would be '2' and the 'wheel-as-button' would be 3 - that's just how I've always seen them referred to in explanations, and I thought it was standardised. Not a big deal - the context menus still pop up when I click the right button so it all works ok. (And I just discovered the wheel-as-button does a 'paste' operation when it's clicked. Weird - I've never noticed that before...) But the thing that I find particularly odd: why is the thumb button assigned as '8'. What happened to '6' and '7'? Does the operating system assign these numbers, or are they built into the hardware in the mouse itself? Again, no big deal, I know I can remap the buttons if I need to, but I was just curious as to how this all works and google didn't help.
View 2 Replies
View Related
Apr 14, 2010
I have a Logitech ambidextrous trackball, with a left and right mouse button. The trackball device also has two smaller left and right buttons. I'd like to know how those two smaller buttons are addressed. Ultimately, I'd like to assign certain keystrokes to them, to make work faster. For example, ALT+<right arrow> moves a browser back one page. how to name these keys, or whether/how I should address this USB mouse. FWIW, I'm actually using it through the PS/2 mouse adapter, since that doesn't take a USB slot.
View 1 Replies
View Related
Mar 22, 2010
I'm running Ubuntu 9.1 i386 in test with Vmware 2.0.2. I used Radu Cotescu's patch and instructions to get vmware installed. Everything seems to be running fine in the guest machine (CentOS 5), except I can't ssh from the Ubuntu host to the guest machine.
This guest is a clone of one that is running under on my Ubuntu 8.1 host and networking is fine there. I'm wondering if there were changes to routing or bridging in Ubuntu 9.1 to cause this. I've been digging through google for a while, but haven't seen others reporting any issues. This is definitely particular to Karmic Koala though.
The host's routing table is:
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0
192.168.0.0 * 255.255.255.0 U 0 0 0 vmnet3
[code]....
My routing table on the Ubuntu 8.1 host differs by the link-local line only, and the guests are exactly the same.I can ssh from the guest into the host, as 192.168.0.2 is the hosts ip on the vm network. The host should be able to ssh to the guest as it does in Ubuntu 8.1.
View 2 Replies
View Related
Sep 30, 2009
Red Hat Enterprise Linux 5 kernel supports four I/O schedulers:
- cfq (Completely Fair Queuing)
- deadline
- noop
- anticipatory
I read in documentation that the recommended kernel line settings for 64-bit Red Hat Enterprise Linux 5 running as a VMware guest are:
divider=10 notsc iommu=soft elevator=noop
But for single instance databases with dedicated storage the deadline scheduler is recommended. The deadline scheduler reorders I/O to optimized disk heads movement and caps maximum latency per request to prevent resource starvation for I/O intensive processes. I have an Oracle instance on RHEL5 running as a VMware(ESX) guest with dedicated storage. What scheduler is better in my case?
View 5 Replies
View Related
Jan 11, 2011
I have a new public mail server running under Vmware Server 2.0 installed on Windows Server 2008. I'm not satisfy about performance, virtual machine has got 3gb of ram and 2 virtual cpu. Physical machine has got one intel xeon cpu 2.4ghz quad core, 8 gb of ram and 3 hdd 500gb raid5. I already set this option: Fit all virtual machine memory into reserved host RAM. How can I increase performance? Are there any kernel build for virtual installation?
View 11 Replies
View Related
Apr 25, 2010
I am trying to use my Microsoft Optical Wheel Mouse (it has left button, right button and the wheel button) in Ubuntu 9.04.I would like to use the wheel button to perform the same task as backspace key in firefox browser and file browser. I have hunted around the net for the past two weeks and found many articles on imwheel and editing x11config files but they all are for 5 of 7 button mice. I have installed and used imwheel -c which tells me that it is "wheel: Left Button 6". However as a total beginner with Linux I am not sure what to do from here. I am hoping that someone would be kind enough to give me a reasonably detailed explanation of what I need to do. If someone could spend some time to list what files I need to edit and what I need to insert into them for this mouse I would be grateful.
View 3 Replies
View Related
Feb 5, 2010
[There are quite a few outdated guides relating to older versions of Fedora, so I figured that I'll write it up specifically for Fedora 12 to make life easier for others]
This guide is based on a fully patched Fedora 12 distribution as of Feb 5 2009.
A default install of Fedora 12 as a VMware Image (Guest) will generally fail to install VMware Tools for the following reasons (In the Fedora 12 Guest Image):
1. GCC and related packages are not installed
Make sure that 'yum list gcc*' has at least the following packages installed (these are not installed by default unless you select developer configuration).
[root@localhost ~]# yum list gcc*
Loaded plugins: presto, refresh-packagekit
Installed Packages
gcc.i686 4.4.2-20.fc12 @updates
gcc-c++.i686 4.4.2-20.fc12 @updates
2. Correct kernel-devel packages are not installed. This generally manifests itself via the following prompt:
'What is the location of the directory of C header files that match your running kernel?'
Fedora 12 installs kernel-PAE by default instead of the normal kernel rpm for the i386 distribution. Consequently, the header files required by vmware-config-tools.pl are found in 'kernel-PAE-devel' and not 'kernel-devel'.
[root@localhost ~]# yum list kernel*
Loaded plugins: presto, refresh-packagekit
Installed Packages
[code]...
The symlink /lib/modules/2.6.31.12-174.2.3.fc12.i686.PAE/source should work if the correct kernel-*-devel package is installed. vmware-config-tools.pl seems to only check this link to determine if it has found a legitimate kernel header directory.
View 4 Replies
View Related
May 26, 2010
I'm trying to install the vmware tools in Fedora 13. I've run the following commands as root:
yum install gcc -y
yum install kernel-devel -y
./vmware-install.pl
...
when it asks for the location of the directory of the C header files that match my running kernel I entered:
/usr/src/kernels/2.6.33.4-95.fc13.i686/include
but vmware-install.pl says:
The path to "/usr/src/kernels/2.6.33.4-95.fc13.i686/inc" is not valid..
View 14 Replies
View Related
Sep 1, 2011
When I run as a VMWare Player guest (Win7 host), I sometimes lose keystrokes (several times a minute) or have repeat keys like thissssssssssssssssss (not as often).This doesn't happen with WinXP guest on the same VMWare installation, or Suse running outside VMWare on the sam hardware, so I suspect the combination of Suse guest + VMWare Win7 host.
View 1 Replies
View Related
Sep 14, 2010
I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies
View Related
