I just installed Debian lenny 5.0.5 and when i start it up the monitor just displays a 'out of range' error. im using a Radeon HD 5570 graphics card and a lG W2353V-PF monitor.
what do i have to do to fix this problem?
i am having trouble configuring XFdrake with my dell 1905fp moniter,or is there a problem with pclinuxos 2010. it started by about a month ago and it wouldnt boot. after reading on the net i ran fsck and everything ran ok. i have the same problem again. i ran fsck again, but this time it didnt work. i found out about XFdrake and ran it, again same command line screen. it is a configuration error, or is there another problem. is there any way of setting a fail safe or what would be the recomended action to take.if the pclinuxos 2010 has to be re-installed its not really a problem.
View 1 Replies View RelatedWorking fine: ==> scp my_log-bin.01393[0-9] root@192.168.103.66:/backup/ error - No such file or directory: ==> scp my_log-bin.0139[30-99] root@192.168.103.66:/backup/
View 4 Replies View RelatedI just dumped Ubuntu to try F-15. Was using natty for acouple of weeks, was installed on new comp. I found videos a little choppy so going to see how this works out.My question is how can I add the systrm moniter to the top bar. I was able to do this on natty using tips on tweaks and fixes.That took me a while to type the commands correctly so hoping to get commands for dummies version.Also is it possible to get CPU temp readings as well?
View 2 Replies View RelatedI'm new to Fedora and must say I love it. Previous Debian and Arch user but feel at home now. I'm after a difinitive answer for this issue as I can't seem to find what I need anywhere. I'm running Fedora 11 kde 4.2.4 with an Epson Photo Stylus RX425 printer / scanner combo connected via usb. Is there any way to moniter the ink levels in this printer? I'm tearing my hair out.
View 9 Replies View Relatedget me understand the short range and the long range links from routing (and routing protocols') point of view.
View 6 Replies View RelatedI want to plot a set of data in only one plot.The problem is that some points of the data should be better plotted in a linear scale (lets say 0 to 100,000) but there are other data points that, exceding the value 100,000, would be better plotted in a logarithmic scale, as they goes in the range 100,000 to 500,000,000. Let's say the data is:
Code:
X Y
0 100
10000 80
20000 75
[code]....
Is there a way to plot all these points in the same plot in only one X-axis showing two different ranges in that axis: linear: 0-100,000 logarithmic: 100,000 - 1,000,000,000?The axis would be read, for example, as:
Code:
|-----|-----|-----|-----|-----|-----|-----|-----|-----|
0 20k 40k 60k 80k 100k 1M 10M 100M 1G
(The abbreviations k-M-G are not the important point. Just shown for clarity)
I am a Windows Server guy trying to stay afloat on this Linux installation I am doing so please bear with me. I have installed RHEL 5 and installed the updated NVIDIA 256.53 certified driver. Upon rebooting everything was great. I got to the X server login and entered my user name and password. The very next thing I see is "Out of Range" error on my monitor. I know that I needed to verify that my xorg.conf file had the proper refresh rates specified in it for my monitor, which I have done.
View 3 Replies View RelatedI want to build a bash script, which can ping a range IP adresses which will be filled in by the admin. If there is no IP-adress filled in, then the script must ping the subnet where the system is logged on. So if my ip is 192.168.1.6, then the script must ping from 192.168.1.1 till 192.168.1.255 Or else, if there is given a beginning and ending ip it must ping that!
The first part of the bash script is to ping a given range (see below). But there is one problem, how can I tell the script to ping from $begin till $end, [..] is of course wrong! But what must be filled in there???
echo "Enter beginning IP-adres:"
read begin
echo "Enter ending IP-adres:"
read end
ping -c 1 $begin [..] $end
The second part is to find my own ip and ping the whole range.. How to do that? I only can find my own IP, but I cant ping the whole range,, how to do that?
#!/bin/bash
ifconfig | grep 'inet addr:' | grep -v '127.0.0.1' |
cut -d: -f2 | awk '{ print $1 }'
I just installed Ubuntu server on one of my computers, but when I boot up the screen goes blank and the monitor gives me an 'Out of Range' error. I understand that this means that the resolution settings are too large for the monitor, but I don't understand how to change them, since there is no GUI installed. Details:
Monitor:
LCD
Recommended Resolution is 1280x1024
I have also tried it on another monitor with a recommended resolution of 1920x1080, This also gave me an OOR error. Ubuntu Server version 11.04
I get this error when running my program under linux; under windows it works as expected:
Code:
$ ./mssql_test
("QSQLITE", "QMYSQL3", "QMYSQL", "QODBC3", "QODBC")
qGetStringData: Error while fetching data ("[FreeTDS][SQL Server]Program type out of range")
QVariant(int, 1) QVariant(QString, "")
I can retrieve int's just fine, but not nvarchar's. I'm using unixODBC 2.2.12 and FreeTDS 0.82. The funny thing is, that I can use isql and tsql with no problem. The mssql_test program:
Code:
#include <QSqlDatabase>
#include <QSqlError>
#include <QSqlQuery>
#include <QDateTime>
#include <QDebug>
#include <QVariant>
#include <QStringList>
#include <QSqlRecord> .....
The same error and output continue for the next records. These have cut out. I've been looking for a solution of a couple of days now, with no luck.
I hooked up my laptop via monitor cable to the L.C.D. T.V. and ran a patch I found on Ubuntu forums because it wasn't showing up on the T.V. After that it asked me what screen resolution I wanted I entered it and then the screen worked! However, now when I play movies on either the T.V as a monitor or just on the laptop itself it comes out with bad video quality now. It sucks because that was the purpose of hooking up my T.V. as the monitor was to watch movies and videos I have downloaded.
View 9 Replies View RelatedI am running Ubuntu 9.10. When I open my system monitor I get a fuzzy box full of jumbled patterns and colors. Also internet and music notifications in the upper right hand portion of the screen appear in the same way. I am attaching a screenshot of the problem.
View 1 Replies View RelatedI have an hp vs17e monitor and I am running slax linux But I have absolutely no idea how to fix the error resolution out of range on my computer monitor.it then shuts off and I can turn it back on and it'll do the same thing.
View 1 Replies View RelatedI need to write a simple app that is huge in size (256 MB) but I can only got it up to 31 MB and got compiler error if I went greater than 32 MB. /tmp/cc7Ax35n.s:246: Error: operand out of range (0x02000004 is not between 0xfe000000 and 0x01ffffff).
I tried to change ulimit -l and -s options but it didn't help. Does anyone know why I got the compiler error and how to fix it? I am running RHEL 5.4.
[Code]...
Having a bit of an issue with Python while trying to write a script to download every rar file on a webpage. The script successfully downloads any link that doesn't contain any spaces, etc. But when it hits a url like: [URL] (Classical Spelling).rar. It fails...I'm sure this is something simple, but I'm so new to python I'm not sure what to do!
Code:
import urllib2
import os
os.system("curl [URL] -i rar|cut -d '"' -f 2 > temp.out ")
infile =open('temp.out', 'r')
for url in infile:
print url
#url = "[URL]"
#url = target
file_name = url.split('/')[-1]
u = urllib2.urlopen(url)
f = open(file_name, 'w')
meta = u.info()
file_size = int(meta.getheaders("Content-Length")[0])
print "Downloading: %s Bytes: %s" % (file_name, file_size)
file_size_dl = 0
block_sz = 8192
while True:
buffer = u.read(block_sz)
if not buffer:
break
file_size_dl += block_sz
f.write(buffer)
status = r"%10d [%3.2f%%]" % (file_size_dl, file_size_dl * 100. / file_size)
status = status + chr(8)*(len(status)+1)
print status,
f.close()
I'm having a bit of trouble with a regular expression I'm trying to write and I'm not sure if it's something Tcl specific or my lack of regexp understanding.
[Code]...
I get a number of strings passed to a proc in the format 3|x where x is a number, either 0 or within the range 5-12. My understanding is that that regexp will match the literal '3' followed by a '|', the escapes the special meaning of |, and then 0 or, because of |, a number within the range 5-12. However I'm getting the error 'couldn't compile regular expression pattern: invalid character range'.
I certainly do not consider myself a Debian power-user, but I do presently have 3 Lenny systems and 1 Squeeze system running fine in my home on "older" hardware. However, for the past week I have been trying to get yet another system running, and I have hit the wall. This is on a new home-built system with an AMD Athlon II X4 and an ASUS M4A785-M motherboard. The Lenny installation was done with a net install of the AMD64 variety.
I always get a "Monitor frequency out of range" error whenever I boot. I can do a CTRL ALT F1 to get to command line, but I have no success getting to GUI. I have read numerous posts of similar monitor frequency problems with various distros, and most point toward HorizSync, VertRefresh, etc settings in xorg.conf. I have played with a myriad of options there, but I still get the "frequency out of range" error after a reboot. I have swapped monitors to no avail (monitors that work on my other Debian 32-bit systems). I really don't think the problem can be the xorg.conf file, since I have tried the exact same file as on the other machines. (Also, those systems seem to be more than happy without custom HorizSync and VertRefresh options in their xorg.conf files.)
On this new computer, I am using the motherboard's integrated video output (theoretically a ATI Radeon HD5200).I don't know if special options are needed in xorg.conf for this???I am able to successfully boot to GUI with multiple differentCD Linux distros; however, no such luck with the Debian installation. I would prefer to stay with Debian if possible, but I cannot live by command line alone on this system.Please let me know if there is something else that I should try before punting and moving to another 64-bit distro.
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
[For those of you who helped me before hand, sax2 wasn't good enough, so I went with the one-click, aaaaand]
Version: 11.2 "Emerald" with KDE
Card: Nvidia FX 5200
Problem: After installing one-click (5xxx legacy drivers), I ran the nvidia-config command and rebooted. Upon reboot, I get a splash screen and then nothing but a monitor error - "Signal out of Range" [Note: After googling this problem, I found a similar thread with an ATI, but since the difference between nvidia and ati is the same as perfect
Trying to use my Viewsonic VG171b LCD connected w/DVI on a used system I just bought (2.6.32-25-generic, Ubuntu) and am just getting the dreaded "Out of Range" error on the monitor no matter what I try. Have read up on this extensively and tried many things, but have yet to get the monitor to work with Xorg in any video mode at all!Frustrated beyond belief. Have been working on this for two days and never once have I gotten anything but Out of Range. Monitor worked fine on my older SuSE system.Xorg.log reports the video card as "ATI Technologies Inc Radeon 9100 IGP rev 0".Driver is reported as:
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.13.0
[code]...
the electric went off and when it come back on my monitor picture was all out of range. I changed the resolution to bring the picture back in and now the words are almost unreadable.
View 1 Replies View RelatedI'm trying to move files from one directory to another. I only want the files that start with a capital and within a certain range. Say all files that start with a capital between A-K. I've googled this and they all say to use: [A-M]*. But it moves all files A-M regardless if they are uppercase or lowercase.
View 7 Replies View RelatedI have just installed UBUNTU 11.04 and found when booting that "out of range " statement came up, after a few moments it completes the boot, but as I have several distros it doesn't open the selection screen.
View 1 Replies View RelatedI am having a log file where there is some discontinuous of dates are there but if i go for range of date to find the records, if is some date is missing the result is displaying full file list( Start date to end of file ) How could i restrict the result upto the mentioned date range.
Code:
$cat sample.log
Jan 03 -error yyyy-1234
[code]...
i have squid 2.6 installed on centos i created acl which should apply to this ip range i.e 192.168.1.10-192.168.1.15 and excluded 192.168.1.13 how can i do
View 14 Replies View RelatedFor example, given the range:172.128.0.0 - 172.191.255.255I need to find some domain that resolves to an IP-adress within the range. Is it possible ? I'm using a Linux system.
View 3 Replies View RelatedHow can I get/filter history entries in a specific range?I have a large history file and frequently usehistory | grep somecommandNow, my memory is pretty bad and I also want to see what else I did around the time I entered the command.For now I do this:get match, say 4992 somecommand, then I do history | grep 49[0-9][0-9]this is usually good enough, but I would much rather do it more precisely, that is see commands from 4972 to 5012, that is 20 commands before and 20 after. I am wondering if there is an easier way? I suspect, a custom script is in order, but perhaps someone else has done something similar before.
View 2 Replies View RelatedI have a file generated in every event occurred. In this file i have a entries like bellow
<without blank line after Summary>
Summary: Adapter at hardware path 0/6/1/0 :Received an interrupt indicating that a
primitive was transmitted
and sometimes like bellow
<with blank line after Summary>
Summary: Adapter at hardware path 0/6/1/0 :Received an interrupt indicating that a primitive was transmitted What I need is to extract the Summary from the file. I have the following awk script. But it only works if there is no blank line after Summary.
cat server.event.txt|awk '/^Sum/,/^$/'
But I need up to second blank lines after Summary.
I want to know how to copy a range of files from one directory to another.
For example say I list the contents of a directory, how would i copy files 5-15 to another directory?