I installed openLdap on a debian machine for some testing. I followed the instructions here. [URL] Now when I try to do any thing it prompt me for password Which I do remember correctly. However it comes back with error.
Code:
~# ldapsearch cn=admin
SASL/DIGEST-MD5 authentication started
Please enter your password:
ldap_sasl_interactive_bind_s: Invalid credentials (49)
I am setting a ldap server by reffering [URL] and getting following error in step #12
[root@ldap ~]# ldapadd -x -D "cn=Manager,dc=adminmart,dc=com" -W -f /etc/openldap/adminmart.com.ldif
Enter LDAP Password:
ldap_bind: Invalid credentials (49)
I am using RHEL 5.5.
I just tried to build my own samba/ldap server on opensuse 11.3 and i am continuously getting an invalid credentials error when doing the smbpasswd -a command. Below are my smb and ldap files.
smb.conf
# Primary Domain Controller smb.conf
# Global parameters
[global]
unix charset = utf8
workgroup = MERCDOMAIN
netbios name = mercserver
passdb backend =ldapsam:"ldap://mercserver.mercdomain.com"
username map = /etc/samba/smbusers
log level = 1
syslog = 0
log file = /var/log/samba/%m
max log size = 0
#name resolve order = wins bcast hosts
time server = Yes
printcap name = CUPS
add user script = /usr/sbin/smbldap-useradd -m '%u'
delete user script = /usr/sbin/smbldap-userdel '%u'
add group script = /usr/sbin/smbldap-groupadd -p '%g'
delete group script = /usr/sbin/smbldap-groupdel '%g'
add user to group script = /usr/sbin/smbldap-groupmod -m '%g' '%u'
delete user from group script = /usr/sbin/smbldap-groupmod -x '%g' '%u'
set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
add machine script = /usr/sbin/smbldap-useradd -w '%u'
logon script = logon.bat
logon path = \mercserverprofiles\%u
logon drive = H:
domain logons = Yes
domain master = Yes
wins support = Yes
# peformance optimization all users stored in ldap
ldapsam:trusted = yes
ldap suffix = dc=mercdomain,dc=com
ldap machine suffix = ou=Computers,ou=Users
ldap user suffix = ou=People,ou=Users
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Idmap
ldap admin dn = cn=Manager,dc=mercserver,dc=com
ldap ssl = off
idmap backend = ldap://127.0.0.1
idmap uid = 10000-20000
idmap gid = 10000-20000
printer admin = root
printing = cups
# = Share Definitions =
[homes]
comment = Home Directories
valid users = %S
browseable = yes
writable = yes
create mask = 0600
directory mask = 0700
[sysvol]
path = /home/data/samba/sysvol
read only = no
[netlogon]
comment = Network Logon Service
path = /home/data/samba/sysvol/vavai.net/scripts
writeable = yes
browseable = yes
read only = no
[profiles]
path = /home/data/samba/profiles
writeable = yes
browseable = no
read only = no
create mode = 0777
directory mode = 0777
[Documents]
comment = share to test samba
path = /home/data/documents
writeable = yes
browseable = yes
read only = no
valid users = "@Domain Users"
slapd.conf
UW PICO 5.04 File: /etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/samba3.schema
modulepath /usr/lib/openldap/modules/
# moduleload back_bdb.la
pidfile /var/run/slapd/slapd.pid
argsfile /var/run/slapd/slapd.args
# Samba Primary Database mercdomain.com
database bdb
suffix "dc=mercdomain,dc=com"
directory /var/lib/ldap
rootdn "cn=Manager,dc=mercdomain,dc=com"
rootpw merc84
index entryCSN eq
index entryUUID eq
#access to attrs=userPassword,sambaLMPassword,sambaNTPassword
# by self write
# by dn="cn=Manager,dc=mercdomain,dc=com" write
# by * auth
#access to *
# by dn="cn=Manager,dc=mercdomain,dc=com" write
# by * read
# Indices to maintain
index objectClass eq
index cn pres,sub,eq
index sn pres,sub,eq
index uid pres,sub,eq
index displayName pres,sub,eq
index uidNumber eq
index gidNumber eq
index memberUID eq
index sambaSID eq
index sambaPrimaryGroupSID eq
index sambaDomainName eq
index default sub
ldap.conf
UW PICO 5.04 File: ldap.conf # LDAP Master
host mercserver.mercdomain.com
base dc=mercdomain,dc=com
binddn cn=Manager,dc=mercdomain,dc=com
bindpw merc84
bind_policy soft
pam_password exop
nss_base_passwd ou=People,ou=Users,dc=mercdomain,dc=com?one
nss_base_shadow ou=People,ou=Users,dc=mercdomain,dc=com?one
nss_base_passwd ou=Computers,ou=Users,dc=mercdomain,dc=com?one
nss_base_shadow ou=Computers,ou=Users,dc=mercdomain,dc=com?one
nss_base_group ou=Groups,dc=mercdomain,dc=com?one
ssl no
I just wanted to checkout samba. So, I installed on a CentOS 5.5 64bit server. The version I used is 3.5.6. I followed this guide. [URL]. LDAP is working good. When I use the following command: (net groupmap list) I am getting the error.
Code: [root@server1 samba]# net groupmap list
[2010/10/26 16:26:09.135901, 0] lib/smbldap.c:1151(smbldap_connect_system)
failed to bind to server ldap://127.0.0.1 / with dn="cn=root,dc=mtm,dc=testdomain,dc=com" Error: Invalid credentials
[2010/10/26 16:26:39.180063, 0] passdb/pdb_ldap.c:3448(ldapsam_setsamgrent)
ldapsam_setsamgrent: LDAP search failed: Time limit exceeded
[2010/10/26 16:26:39.180109, 0] passdb/pdb_ldap.c:3523(ldapsam_enum_group_mapping)
ldapsam_enum_group_mapping: Unable to open passdb I am sure that I have set the correct password in Code: smbpassword -w mypassword.
Also, I can login to the LDAP thourgh PHPLDAPAdmin with the same password and the bind cn.
Here is my smb.conf Code: # Global parameters
[global]
ldap ssl = off
nt acl support = yes
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 SO_KEEPALIVE
workgroup = TESTDOMAIN
netbios name = SERVER1
security = user
enable privileges = yes
#interfaces = 192.168.5.11
#username map = /etc/samba/smbusers
server string = Samba Server %v
#security = ads
encrypt passwords = Yes
#min passwd length = 3
#pam password change = no
#obey pam restrictions = No
# method 1:
#unix password sync = no
#ldap passwd sync = yes
# method 2:
unix password sync = yes
ldap passwd sync = no
passwd program = /usr/sbin/smbldap-passwd -u "%u"
passwd chat = "Changing *
New password*" %n
"*Retype new password*" %n
"
log level = 10
syslog = 0
log file = /var/log/samba/log.%U
max log size = 50
time server = Yes
#socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
mangling method = hash2
Dos charset = 850
Unix charset = ISO8859-1
logon script = logon.bat
logon drive = H:
logon home =
logon path =
domain logons = Yes
domain master = Yes
os level = 65
preferred master = Yes
wins support = yes
passdb backend = ldapsam:ldap://127.0.0.1/
ldap admin dn = cn=root,dc=mtm,dc=testdomain,dc=c om
#ldap admin dn = cn=samba,ou=DSA,dc=company,dc=c om
ldap suffix = dc=mtm,dc=testdomain,dc=c om
ldap group suffix = ou=Groups
ldap user suffix = ou=Users
ldap machine suffix = ou=Computers
#ldap idmap suffix = ou=Idmap
add user script = /usr/sbin/smbldap-useradd -m "%u"
#ldap delete dn = Yes
delete user script = /usr/sbin/smbldap-userdel "%u"
add machine script = /usr/sbin/smbldap-useradd -t 0 -w "%u"
add group script = /usr/sbin/smbldap-groupadd -p "%g"
delete group script = /usr/sbin/smbldap-groupdel "%g"
add user to group script = /usr/sbin/smbldap-groupmod -m "%u" "%g"
delete user from group script = /usr/sbin/smbldap-groupmod -x "%u" "%g"
set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
# printers configuration
#printer admin = @"Print Operators"
load printers = Yes
create mask = 0640
directory mask = 0750
#force create mode = 0640
#force directory mode = 0750
#nt acl support = No
printing = cups
printcap name = cups
deadtime = 10
guest account = nobody
map to guest = Bad User
dont descend = /proc,/dev,/etc,/lib,/lost+found,/initrd
show add printer wizard = yes
; to maintain capital letters in shortcuts in any of the profile folders:
preserve case = yes
short preserve case = yes
case sensitive = no
[netlogon]
path = /home/netlogon/
browseable = No
read only = yes
[profiles]
path = /home/profiles
read only = no
create mask = 0600
directory mask = 0700
browseable = No
guest ok = Yes
profile acls = yes
csc policy = disable
# next line is a great way to secure the profiles
#force user = %U
# next line allows administrator to access all profiles
#valid users = %U "Domain Admins"
[printers]
comment = Network Printers
#printer admin = @"Print Operators"
guest ok = yes
printable = yes
path = /home/spool/
browseable = No
read only = Yes
printable = Yes
print command = /usr/bin/lpr -P%p -r %s
lpq command = /usr/bin/lpq -P%p
lprm command = /usr/bin/lprm -P%p %j
# print command = /usr/bin/lpr -U%U@%M -P%p -r %s
# lpq command = /usr/bin/lpq -U%U@%M -P%p
# lprm command = /usr/bin/lprm -U%U@%M -P%p %j
# lppause command = /usr/sbin/lpc -U%U@%M hold %p %j
# lpresume command = /usr/sbin/lpc -U%U@%M release %p %j
# queuepause command = /usr/sbin/lpc -U%U@%M stop %p
# queueresume command = /usr/sbin/lpc -U%U@%M start %p
[print$]
path = /home/printers
guest ok = No
browseable = Yes
read only = Yes
valid users = @"Print Operators"
write list = @"Print Operators"
create mask = 0664
directory mask = 0775
[public]
path = /tmp
guest ok = yes
browseable = Yes
writable = yes
M trying to install sendmail server on rhel6.i am having problem in setting up openldap.
following is slapd.conf
#
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include/etc/openldap/schema/corba.schema
include/etc/openldap/schema/core.schema
code....
but if i try to change ldap password it gives
ldap_bind: Invalid credentials (49) error
i was successfully able to restore my ldif file from old rhel 5.3 server on to rhel 6
I have just installed openldap on my Red Hat server and it is running:
[code]...
However when I try to add my first ldif file base.ldif, no matter how many time I enter in the correct password I get invalid credentials [root@server init.d]# ldapadd -D "cn=Manager,dc=mathcs.duq,dc=edu" -W -f /home/oberlanderm/base.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) I have to be forgetting someting simple,
[code]....
I'm trying to set up an OpenLDAP server on a clean install of 10.04 server (AMD64). Following the server guide [URL] I get down to the "Setting up ACL" step:
$ ldapsearch -xLLL -b cn=config -D cn=admin,cn=config -W oldDatabase=hdb oldAccess
This command fails with "ldap_bind: Invalid credentials (49)"
When I replace the dn with what it seems like it should be:
$ ldapsearch -xLLL -b cn=config -D cn=admin,dc=example,dc=com -W oldDatabase=hdb oldAccess
I get "No such object (32)"
I have a feeling this is because 10.04 no longer asks you for the admin username and password during the initial debconf (nor does dpkg-reconfigure).
I can continue through the guide using this form of the commands (which were used earlier in the Guide):
$ sudo ldapsearch -Y EXTERNAL -H ldapi:/// -b cn=config olcDatabase=hdb olcAccess
But I'm a little concerned that I'm not able to properly use the admin user to make LDAP changes to the configuration. It also seems like the Server Guide ought to use the 'sudo ... -Y EXTERNAL' form of the commands throughout if cn=admin,cn=config isn't going to work.
What is wrong with the following ldif file :
Code:
dn: dc=mydomain
objectclass: dcObject
objectclass: organization
o: My Ldap
dc: mydomain
dn: cn=Manager,dc=mydomain
objectclass: organizationalRole
cn: Manager
Because I get following output :
Code:
[root@1 ~]# /usr/bin/ldapadd -x -D "cn=Manager,dc=mydomain" -W -f /etc/openldap/basic.ldif
Enter LDAP Password:
adding new entry "dc=mydomain"
ldapadd: Invalid syntax (21)
additional info: objectclass: value #0 invalid per syntax
I have an LDAP server holding user/pass/group for many users. Due to network issues, the server sometimes is unreachable and clients cannot login, current sessions usually freeze after a while. All client have ubuntu 10.04.2 x64.
I have went through the outdated howto to cache the LDAP credentials.
I setup the required packages
daily cron "nss_updatedb ldap"
and edited '/etc/nsswitch.conf' to have "files ldap [NOTFOUND=return] db" for both passwd and group.
[Code]....
I am setting up a cluster of servers which use Centos Directory Server for control of logins, etc and kerberos for authentication. The basic setup is working fine, I have been able to manually create accounts using the directory console and these accounts seem to work. Now what I want to do is automate the process of creating new accounts. I am writing a perl script which can be run by one of the server administrators, they supply a small number of arguments and it should create a new user in the directory server, and also create a principal in the kerberos.
I want them to be able to do this using their logged-in kerberos credentials, i.e., without having to enter and re-enter their passwords. My first attempt was to use perl modules Net::LDAP and Authen::SASL. I could not get this working so fell back to using ldap command line tools, but even these I cannot seem to get working! When using mozldap tools, as specified in the admin manual, I get the following:
$ /usr/lib64/mozldap/ldapmodify -h ldaphost.mycompany.com -D uid=eharmic,ou=mydept,dc=mycompany -o mech=GSSAPI -o authid=eharmic < ../ldapmod.txt
Bind Error: Invalid credentials
Bind Error: additional info: SASL(-14): authorization failure:
Using openldap tools I strike exactly the same problem:
$ ldapmodify -Y GSSAPI -H LDAP://ldaphost.mycompany.com -D uid=eharmic,ou=mydept,dc=mycompany -U eharmic < ../ldapmod.txt
SASL/GSSAPI authentication started
ldap_sasl_interactive_bind_s: Invalid credentials (49)
additional info: SASL(-14): authorization failure:
I believe I have set up the mapping correctly:
dn: cn=MyMapping,cn=mapping,cn=sasl,cn=config
objectClass: top
objectClass: nsSaslMapping
cn: MyMapping
nsSaslMapRegexString: ^(.+)@MYCOMPANY.COM
nsSaslMapBaseDNTemplate: ou=mydept,dc=mycompany
nsSaslMapFilterTemplate: (uid=1)
It must be getting reasonably far because after doing the above I can see the LDAP service ticket in my "klist" output.
Anyone out there having expirience with iFolder. I've used the following tutorial: [URL] to install it. I used libflaim as a database (no LDAP). All web interfaces work well (admin, ifolder). I can create users and make folders. But when I try to login with a desktop client (windows or linux) I get an error message invalid credentials and this message in Simias.log:
[Code]...
I am setting up a LDAP server in Fedora 13 system. I did the installation of the packages of openldap-server, openldap-client and openldap-server-sql (beause I may use sql as backend, install first). However, when I did the setup check by command: dapadd -f stooges.ldif -xv -D "cn=StoogeAmin,o=stooges" -h 127.0.0.1 -w secret1
and always says: ldap_bind: Invalid credentials (49) I am using slapd.conf for test as below. I did check the password are same.
[Code]...
I followed the instructions here:
[URL]
This is on CentOS 5.5 with all the latest updates.
I changed rootdn and rootpw in /etc/openldap/slapd.conf with the info for my domain and with an encrypted password using slapcat.
Now when I try to use slapadd like so:
ldapadd -x -D "cn=admin,dc=domain,dc=com" -w passwd -f /tmp/base.ldif
I get the error: ldap_bind: Invalid credentials (49)
I feel like this is a pretty basic/default setup, I haven't changed anything else in /etc/openldap/slapd.conf but for some reason it's not authenticating using the rootpw and rootdn information that I've provided in the config file.
I'm using Ldap to authenticate some services in my company, but from a few days, i finds some errors saying
Quote:
I'm using webmin to manage its servces.
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
I took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.
The firewall is open for ldap.
I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).
However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.
It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
I have a computer I recently uninstalled the operating system from and was wanting to use Linux Ubuntu. After burning the cd and trying to install it to the computer it gives me "Invalid System Disk, Replace then disk and press any key." I am unsure how to start this and I am not even sure if I have all the files, I need to install the Linux Ubuntu 10.04 operating system step by step.
View 4 Replies View RelatedI'm running ubuntu 9.04 and trying to pull over some files via the GUI from a XP box over locally. I'm getting this error:
"error while copying file into /volcano/tunes invalid argument" (under show more details)
If I just copy over a mp3 file it works fine but the when I copy the entire directory I get this error.
Reluctantly I made a temporary install of XP as follows Remove linux drive and install a wiped drive.format ntfs & install windows xp (w/sp3)shift ntfs drive to slave, replace linux drive as master and xp drive as slave. Add it to grub as follows:
Code:
# boot=/dev/sda1
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
titlem$ Windows XP
code....
i have problem executing lex program though the code is correct i'm getting some errors and the error says: In function yylex:
error: invalid operands to binary | (have char * and char *)
error: invalid operands to binary | (have char * and char *)
error: expected ; before { token
Installed rhel 5.3 on dell r710 with md1000 as das.
After creating raid 0 + 1 and rebooting, received an error message below:
I loaded Avast anti virus into Ubuntu 10.10 this morning. It seemed to go okay and uploaded the updates. But then it stopped. Now when I try to start it I get the following error message. 'An error occurred in avast! engine: Invalid argument'
View 1 Replies View RelatedI installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
View 1 Replies View RelatedTrying simply to insert into table. Have succeeded in doing this but now want to correct user use of invalid characters. If I'm understanding correctly, Real-escape-string seems to correct these, so I've been trying to figure out how to use it. A short, test code version gives me a syntax error at INSERT VALUES, which--because it still has the single quotes in the text--tells me the real-escape-string didn't work. The code below gives me a parseing error with invalid $END at </body>.
Insert Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' VALUES (UTC_TIMESTAMP,'What's happen' bra?')' at line 1 Parse error: syntax error, unexpected $end in /home/powere15/public_html/DB/exercises_insert_record.php on line 94
<html><head><title>Exercise Catalog Insert Record</title></head>
<body>
<?
/* Change db and connect values if using online */
[Code]....
I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:
Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format
Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?
I've compiled openssh-5.4p1 on RHEL 4.8 with Openssl 0.9.8m + pam It works perfect without pam (pam-0.77-66), both with password and public key auth. Whith pam enabled and LDAP (openldap-2.4.21, from scratch) something strange happens: system users: I can do ssh with both password and public key LDAP users: public key works for remote users, still I cannot do ssh with just password. I'm trying a custom PAM configuration, because the default one (even with authconfig + LDAP ) blocks ssh even with system users.
My pam SSHD configuration is:
#%PAM-1.0
auth required pam_env.so
auth sufficient pam_unix.so likeauth nullok
auth sufficient pam_ldap.so use_first_pass
[code]....
My LDAP users are ok: i can do "su - " remote LDAP (so that nss_ldap is OK), also getent passwd and getent group is ok.
I'm having trouble getting subversion working on Centos 4.7. When I try to create a repository using:
Code:
svnadmin create /path/to/repo
I get:
Code:
svn: Berkeley DB error while creating environment for filesystem repo/db: Invalid argument
svn: bdb: Berkeley DB library configured to support only DB_PRIVATE environments
I've searched the Net, with little luck. Threads seem to suggest that Centos has this flag compiled into the Berkeley DB RPM by default; whereas SVN doesn't want it. Someone, somewhere, must have got this to work and I'm sure it's something really simple I'm doing wrong.
[code]....
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
This is my first post so quite fitting it should a pretty stupid question. I have a CentOS server to which I have installed mysql/apache/vsftpd/php5 and wordpress. I can ftp in using the ftp account (i changed the password) but it cannot create directories/files. Im trying to change the wordpress theme for which it askes for FTP credentials and when I put them in i get this error Could not create directory /var/www/html/wordpress/wp-content/upgrade/midnight-blue.tmp
I am guessing this is either a permissions problem on the user side or a directory permissions/ownership issue, but i have no clue where to start on this.