General :: Killing All Processes Of Current User?
Jun 15, 2010
user@host$ killall -9 -u user Will it definitely kill all processes owned by user (including forkbombs)?
No new processes is spawned to user from other users. No user's processes are in D-sleep and unkillable.No processes are trying to detect and ptrace or terminate this started killall (but they can ptrace or do other things with each other) There is ulimit that prevents too much processes (but killall is already started and allocated it's memory)
E.g. if killall will finish untampered and successfully is it 100% that no processes are left with this uid? If no, how to do it properly (with standard commands and no root access). Will SysRq+I definitely kill all things (even replicating)?
View 2 Replies
ADVERTISEMENT
Feb 21, 2010
Why each boot-level consist of shell-scripts that start and stop processes? Why does the system while booting not just simply add the necessary programs for the next level by starting them, thus making the stopping of specific tasks not necessary and certainly speeding up the boot process?
View 5 Replies
View Related
Mar 10, 2011
I want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
View 1 Replies
View Related
Apr 13, 2011
When i do the following with logged in with root:
Code:
i get
Code:
When i login with user1 and do ulimit -a
i get
Code:
Why is the max user processes different for the same user? And how can i change this. I need for this user more then 20 processes...
View 2 Replies
View Related
May 21, 2009
I am studying for the LPIC-1 exam, and reading a book that they recommend: "Introduction to Linux: A Hands-on Guide", by Machtelt Garrels. There's one question on the 4th chapter (Processes), that I found confusing: Question: Based on process entries in /proc, owned by your UID, how would you work to find out which processes these actually represent?
What does he mean? If I run the command (considering that my username is sl33p):
Code:
$ps -u sl33p
...gives me the right answer?
The ps man page says:
-u userlist
Select by effective user ID (EUID) or name.
This selects the processes whose effective user name or ID is in userlist. The effective user ID describes the user whose file access permissions are used by the process (see geteuid(2)). Identical to U and --user.
View 8 Replies
View Related
Nov 18, 2010
All the kill idle user processes scripts I've seen don't take into account that the user might have multiple sessions open. Such is the case with one of our clients. Currently, every hour or two I need to do the following:
This will get the TTY and idle time for all users.
For each idle time over a half hour, I do the following (TTY is the TTY from the previous command with a space.
I then kill those processes.
There must be a way to do this automatically in a bash or perl script. I've tried both, but can't seem to get things to work properly.
View 2 Replies
View Related
Nov 2, 2010
I would like to give a non-root user (nicollet) the ability to detect and send a signal to processes started by Apache2 (those processes are FastCGI scripts and the signal tells them to empty their cache). The processes are owned by the web user (www-data), and I'm running on Debian unstable.
I can't find any way to have the nicollet user see those processes.
The processes are running and can see by both root and www-data:
root@linux-01:~# ps -Af | grep baryton
www-data 17649 17648 0 10:27 ? 00:00:00 baryton
www-data 28145 1 0 Nov01 ? 00:00:12 baryton --bot
root 18701 18700 0 10:46 pts/0 00:00:00 grep baryton
root@linux-01:~#
[Code]....
The most surprising is that the grep process is indeed run by www-data (because it's started from a setuid executable) and is visible, but the baryton process isn't.
What's going on here? Why can ps run by www-data show those processes, but ps run by a setuid executable running as www-data cannot, when it's started by nicollet?
View 1 Replies
View Related
Feb 2, 2009
Few days ago, the server did not respond to a ssh request from a user at night. A user tried to check what went wrong with computer and tried to login from terminal next morning. As the computer was unresponsive, he somehow decided to boot it by turning the power off. To make the story short, the server rebooted; however, he can't login to his account. Actually, the server could not start some processes; but was able to ask user to enter his account username. Even though, he enters the correct username and password, server does not accept the request. I also could not login as root.
I just checked the server logs by booting it in single user mode. Here are some interesting lines:
Before the reboot:
irqbalance : can't balance irqs on a uniprocessor system: failed
After the reboot:
irqbalance : can't balance irqs on a uniprocessor system: failed
fsck:
fsck /: (this is repeated 900+ times)
[code]....
View 1 Replies
View Related
Oct 5, 2010
Normally all I/O goes through the kernel so that it can schedule the operations and prevent processes from stepping on each other. A few special user processes are allowed to slide around the kernel, usually by being given direct access to I/O ports. X servers are the most common example of this isn't it ? give examples for any other processes that are allowed to slide around the kernel ?
View 3 Replies
View Related
Mar 6, 2011
I'm trying to get the end result to have the same format as this as well:
1 bin
2 daemon
67 erozner
[code]....
Where the numbers are the number of processes being run by the user (the name right next to it).if I input the command egrep myFile into the terminal, it should look for every line with the letter x in myFile, right?
View 5 Replies
View Related
Nov 2, 2010
Are there any tools to view/edit user space memory of running processes on Linux?
It would be a great learning tool.
View 1 Replies
View Related
Jul 15, 2010
i'm using centos 5 and i want to save my setup when switching the user.when i switched user from user1 to user2 and then i logged in user1 back without shutting down, i couldn't see any working window on user1. But since it's working on the CPU, i guess it's working but i cannot just see the window(such as terminal in my case) i was using. i have been using scientific linux which have "save current setup" when logging out. but centos seems not to have that check box!i want to know whether centos can contain the setup for each user when switching user.
View 5 Replies
View Related
Sep 3, 2010
This netbook only has a user with non-administrative privs on it and root user but I do not have root's password.Is there a way that I can create a new administrative user of change the current user's group so that it can do sudo commands or have more privs?
View 1 Replies
View Related
Feb 10, 2010
I have some domains on a VPS server. Typical account memory usage for all domains runs at 50% of available, but I have a problem. One domain is causing me trouble because intermittently traffic will spike on that domain, causing so many requests within 1 min that I exceed my memory allocation for my entire VPS package. Apache is then killed but the virtualization software and Apache must then be restarted.
A sample snippet from tops right before the sever went down would like like this:
All of that memory usage adds up. I would like to "throttle" the number of processes that user/domain can run. I think this would be a quick and easy way to keep the domain from taking down my entire VPS. My understanding is that I could do this with the /etc/security/limits.conf file.
Is that correct?
I have never done this before. Do I want to set a hard or soft limit? I think if I wanted to limit the number of processes for "coldclim" to 15 I would add a line to limits.conf like this:
Code:
Assuming that is correct, can anyone tell me how the website would respond once it reached its limit? Would visitor queries become sluggish, or would the website not come up for them at all?
View 4 Replies
View Related
Feb 15, 2011
I have a problem with the permission of the directories under /proc, they are readable and accessible only by Owner (they have permission 500 instead of the usual 555) As a consequence, the processes are visible only to the Owners or to Root. For exampleif I want to check if there is mysql
I see it only with the user mysql or with root because the directory has permission 500
This problem obstacles the functioning of some applications that should check the existence of some processes managed by other users. At the beginning all was working well. But after a while the problem appeared and I dont know which is the reason of it. how to restore the standard management of permissions of / proc?]
I have a Ubuntu server Maverick 10:10.
View 2 Replies
View Related
Jan 9, 2010
is there any possible way to hide currently running processes from an user? This means I do not want him to know about what programs/processes does any other user but him run. In short words if that user runs 'ps -aux' he should get only his processes.
View 3 Replies
View Related
Feb 2, 2009
Few days ago, the server did not respond to a ssh request from a user at night. A user tried to check what went wrong with computer and tried to login from terminal next morning. As the computer was unresponsive, he somehow decided to boot it by turning the power off. To make the story short, the server rebooted; however, he can't login to his account. Actually, the server could not start some processes; but was able to ask user to enter his account username. Even though, he enters the correct username and password, server does not accept the request. I also could not login as root.
I just checked the server logs by booting it in single user mode. Here are some interesting lines:
Before the reboot:
irqbalance : can't balance irqs on a uniprocessor system: failed
After the reboot:
irqbalance : can't balance irqs on a uniprocessor system: failed
fsck:
This might be something related with shadow file.
Here is part of /etc/shadow
View 3 Replies
View Related
Mar 24, 2010
this is scary, bunch of vmware-user-wra processes stall cpu 100%!! What's going on? Server has just been restarted! Bere I restarted, the root started all this vmware-user-wra!! I was configuring vncserver! After restart, it's started by user roo300 which I have used to login via SecureShell!
Code:
top - 20:20:29 up 4 min, 85 users, load average: 76.57, 35.14, 13.60
Tasks: 629 total, 90 running, 539 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.5%us, 98.5%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3873304k total, 369500k used, 3503804k free, 50492k buffers
[code]....
View 2 Replies
View Related
Feb 11, 2010
I have what I think is a somewhat different failure of standby than I've seen listed on other threads, and I'm stumped.The system hangs on this for a while, then comes back to the login screen without going into standby. This ONLY HAPPENS on a SECOND standby attempt--the first standby after booting ALWAYS succeeds.The standby log doesn't indicate any failures.I had made other changes previously that temporarily got standby working consistently:/etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash usbcore.autosuspend=-1"
View 1 Replies
View Related
Aug 10, 2010
I have some heavy, long processes running on remote Linux machines. I use my laptop to SSH to these machine and run the processes from my couch.
BUT, when I want to shutdown my laptop, I am in trouble since the remote processes are killed.
I did my research and found out that "screen" is a great solution for me, it is! (As long as I don't SHUTDOWN my laptop). Isn't there a way to "persist" the "screen" sessions so I can shut it down and then re-attach to a session?
View 7 Replies
View Related
Oct 15, 2010
I have a zombie running on my computer(Ubuntu 10.10) and although I have tried killing it using the processes PID number it won't die.
Tasks: 137 total, 4 running, 132 sleeping, 0 stopped, 1 zombie
Cpu(s): 49.7%us, 50.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1016076k total, 938688k used, 77388k free, 25896k buffers
Swap: 3069948k total, 23140k used, 3046808k free, 584956k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1733 stephani 20 0 0 0 0 Z 46.7 0.0 52:34.34 transmiss <defunct>
Transmission has being running for almost 60 minutes and is consuming a very large amount of the CPU.
View 8 Replies
View Related
Oct 9, 2010
I want to capture PID of a program and kill it using the PID if the program is been executing beyond 5 seconds.The problem I'm facing is I have another copy of the same program running under different shell script, and the above code is killing both the process. How do I specifically kill the program which has started under the current running shell script.
View 2 Replies
View Related
Jul 19, 2010
I install the antivirus, ClamAV, onto a RedHat 4.8 box (yes it has to be that release of the OS to work with my other software needs) and after the install and giving the permissions to another user/group dedicated to this AV I get a ton of errors. After the install a few things pop up after a restart/logout. When trying to log back in the Gnome environment crashes so you cannot access any acct aside from using the text based environment. Two other error windows appear as well, one mentioning Bonobo has died and the other saying that Nautilus cannot be started due to Bonobo. I'm not too familiar with Bonobo can anyone fill me in on why those errors occured?
View 2 Replies
View Related
Jan 14, 2011
i am using putty to connect to the linux server and i am using nano as my text editor to write a bash script.
this is my script:
echo "Please enter your Username"
read userName
userName= grep $USER /etc/passwd | cut -d: -f5
echo "Welcome " $userName | cat >> output.txt
the problem i have is that when i enter my username, the output (my real name) does not display in the output.txt. instead it displays in putty. so when i run my script in putty it shows the message to enter username and after i enter my username my real name appears below it. i want it to show in the output.txt
View 1 Replies
View Related
Dec 21, 2010
i have recently started a bit of sh coding. i was trying out sm commands from an sh file.
#!/bin/bash
txt1="top > temp.txt"
eval $txt1
[code]....
View 14 Replies
View Related
Jun 28, 2011
I was looking into a shell script which had a line "kill -0 [pid]" , I would like to know what the -0 flag does as i found it is not killing the particular [pid] process.
View 2 Replies
View Related
Aug 23, 2010
I tried to stop mysqld deamon. It failed
Code:
[zabbix@CDCTGIMCLSA ~]$ sudo /etc/init.d/mysqld stop
Stopping MySQL: [FAILED]
[code]....
View 14 Replies
View Related
May 2, 2010
as the tags suggest, i'd like a fresh install of linux using grub2, and partition my harddrive
View 3 Replies
View Related
May 31, 2011
Possible Duplicate: Leave bash script running on remote terminal while not logged in? I run a program, say ./a.out 10 from the shell prompt. Assume that there's a while(1) inside the program being run. Now if I try to close the shell, it warns me that it'll kill my running program too! So, how to kill the shell and still let my program continue running in the background?
I tried exec ./a.out 10 but the shell is still there. Another alternative is to simply double click my executable but then how will I pass command line parameters?
View 2 Replies
View Related
Feb 11, 2011
I have to write a script that says Hello, [current user]. Today is [date]. The time is [time am/pm]. You have logged into a [term] terminal.My script looks like this:
DOW=`date +%A`
MOY= `date +%B`
DOM= `date +%d`
[code]....
View 1 Replies
View Related
