I just installed Fedora 12 and after downloading and running the Java Sound Demo I get exceptions. If I run just a vanilla Java program that plays a .wav file it runs silently with no sound and no exceptions.
Every other app seems to play sound. I also took some advice from this thread in the Ubuntu forums which almost seemed to work. (Installing aoss got rid of the initial exceptions in the sound demo but I still hear nothing when I play.) I'm getting frustrated by the individual hoops I have to go through to eek sound out of my speakers when running Java apps on Linux platforms!
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
I have this old kUbuntu box here, which used to be 8.04. For some reason after a bunch of upgrades and other unrelated changes sound doesn't work any more.
Sound works on this machine when rebooting to Windows, so it's not hardware problem. It used to work on Linux on this machine before, so it's not weird hardware. (lspci says 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)) This problem persists across resets. alsamixer etc. claims sound is not muted, and volume is high. it's the same no matter which program I try to play some sounds (or which -ao for mplayer, default seems to be pulse) nothing obvious shows up in system settings
Do I really need to reinstall the system to fix that, or is there something simple I'm missing?
I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf andOutput of lspci for the audio device:
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
It seems that there is no way for me to install java plugin in firefox 3.6. I've already read some threads about similar problems but none of the solutions that worked for other people work for me. So I decided to open a new thread. Following instructions of other threads, I uninstalled all java packages and installed again just the three that you can see below, but nothing changed.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
I've Intellij Idea and Netbeans installed on my Ubuntu desktop. Both worked fine while I was on 10.10.After upgrading to 11.04 both of them became irresponsive to Ctrl+C/Ctrl+V/Ctrl+{Any alphabet letter} combinations. However these combinations work in non-Java apps (e.g. gedit).Besides that Ctrl+Alt+L (Lock screen) is not handled by the system, no matter what application is active.Disabling unity does not help. Starting in ubuntu classic w/o effects does not help either.
I have a motherboard Gigabyte H110M-H DDR3 1.0 and a VGA Nvidia NVS 300 (It doesn't have HDMI connector, but after Debian installation, it shows audio HDMI), After installling Debian 8.4 Jessie amd64, I noticed the sound doesn't work, the motherboard audio codec is a Realtek ALC887, I don't have a HDMI Monitor, nor my VGA has HDMI Connector, but is a little bit strange that Debian recognizes HDMI Audio, if a run "# cat /proc/asound/cards" it shows me two audio cards, the HDMI and the ALC887 and if I run "# cat /procs/asound/modules", both cards are using snd_hda_intel. It is installed PulseAudio and Pavucontrol, I have checked if the audio was muted, but the sound volume is set to 100%, I don't know what to do anymore... I have a computer with a realtek codec too, but it's another model ALC665 or something like that, and the system is equipped with an ATI HD 5450 with HDMI Audio, I have checked the what modules the Debian is using, and both uses the snd_hda_intel, but the sound works with HDMI and Realtek Codec.
Every time I log in Ubuntu 10.04, everything works fine, but there is this annoying problems with the sound volume and icon: It always appears as muted, and if I try to turn the volume up, or down, it wont make any difference, it stays muted.
Plus, if I try to shut it down, it always redirects me to the log in screen, always. The only way to turn down the laptop is, then, to unplug the wire.
when i tried to watch a videos video today, i noticed that i suddenly didn't have sound anymore just yesterday, it still worked fine. changing the video volume didn't do anything, so i looked at the mixer icon in the taskbar - and noticed to my surprise that it was suddenly set to mute, without me ever having touched it!
i set it back to full volume, but still nothing. i then tried to play ordinary videos in nmy video layer, but also there - no sound! so it's not limited to flash videos. the sound test in yast doesn't play any sound, either, it produced just a very short popping sound, that's all. i tried turning off pulse audio there, but that didn't change anything, so i turned it on again (i use pulse audio for sound).
next, i tried the kde control panel, but got no test sound either, just again the very short popping sound on htting the test button and nothing else. i've even tried switching the preference from xine (which i normally use) to gstreamer, but that didn't change anything either. then i did a reboot and tried things again, but no change. finally, i checked my headphones. they were plugged in properly, and plugging them out and back in again didn't do anything either.
so i'm out of ideas what i could still try. sound hardware is realtek hd onboard sound, which is identified as "hda ati sb alc889a analog". kde is 4.4 rc3, which i've been using already since over a week without problems, so i doubt that's the problem.
I have Wine installed in ubuntu/Kubuntu Jaunty and I can play games like Roller Coaster Tycoon fine in it (it works great and has sound) but when I try to use my disk for Ear training (which is an .exe file) I can view/use the program perfectly except there is no sound, the disk works in the school computers so I know its not faulty, but the sound just doesn't work in Wine.
I changed the format in Wine to all the different Windows (Vista, XP, 2000, etc.) and the sound didn't work in them either, everything in Alsa mixer is turned up 100% and I've tested it with both my head phones and computer speakers, but theres never any sound.
I bought a Toshiba Nb205 laptop with a Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) inside. After I first got it I installed Ubuntu onto it, and that's where the problems started. After everything was installed I noticed that my sound doesn't work. So I looked everywhere. I tried so many solutions offered on these forums including messing around with Alsamixer and nothing seemed to be working. Then one day I luckily stumbled upon this website that directed me here: [URL] So I went there and picked the Linux 2.6(X86)(DEB) from the drop down list and installed it. I rebooted my machine, and I now had sound.
However, the only problem is that I can't control the volume of the sound. When I play something, it stays at one volume and one volume only. Nothing on sound preferences will work. The only way I can raise or lower the volume is if I do it in the application that I run, like if I am playing a ..... video, I have to use their volume control to control the volume. My master volume won't work at all.
I have a Acer Aspire One netbook running Lucid Lynx.Sound quality is fine through my speakers, but when I plug in headphones things go awry. The headphones are working because the speakers mute and I can hear musical instruments playing on the track, but I can't hear any of the voices in the music.It's as if the voices are muted, but I can still hear the guitars, drums, bass, etc. When I unplug the headphones the track plays normally, voices and all, through the speakers.
I use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
first because of my nvidia card if I don't put nomodeset my screen turns off.also whenever I try to update my nvidia drivers either the ones from the ones from the website or the propriety drivers I get a MCU failure or something like that and to fix that i have to change "nvidia" in my xorg.conf to "nv" but then my resolution loads to 640x480 which i cant change and it says im not using the propriety drivers so then i changed "nv" to "vesa" which makes my screen highest screen resolution 1280x 720 and apparently my refresh rate is 0. but i cant do anything good without the propriety drivers.Also my sound doesn't work at all unless i plug in some headphones.
after installing trying to install veetle on my ubuntu 10.04 64 bit I always get the message at the start-up:could not update /home/user/.ICEauthority.my sound control does not work anymore (message: 'waiting for sound system to respond')using Krusader I get the message 'Cannot talk to klauncher: The name org.kde. klauncher was not provided by any .service files.I checked the owner of .ICEauthority and the permission and they are OK. Same for my /home. None of the suggestions found in the other threads worked.Veetle has been installed using the install.sh script and there is no unistall option
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
I am using Ubuntu 9.10..My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
ive just installed dosbox, my favorite dos emulator. in windows, i usually used to play doom and both sound and video worked flawlessly. when i tried running doom in dosbox in ubuntu, the game ran perfectly, but the problem is with the sound. the soundblaster sound effects stutter and are not even working at times. the soundblaster based music doesnt even work! i either blame pulse-audio or the defaut config settings.
I am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
I have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
I have a fairly fresh Slack install. When I start or shutdown X, the sounds that are supposed to play do. Also, sometimes everything else that is supposed to play sounds does.
However, sometimes the sound doesn't work for flash content or pidgin. I have never had a similar problem and I don't know where to start in resolving this issue.
I have been using Eclipse to program in Java for a long time, and have been using Jigloo for most of my GUI design. Recently I decided to try out the C/C++ plugin. I tried installing it, but it did not work. After many attempts, I finally gave up. However, after uninstalling it I found that Jigloo had stopped working. Any other plugins I try to install now also don't work. I have tried uninstalling and reinstalling plugins, and reinstalling eclipse, but nothing I have done fixes it. Although eclipse says that the software has been installed, nothing shows up in the features list or the plugins list.
Another problem: When I install eclipse from the repositories, it doesn't install a bunch of libraries and eclipse cannot recognize standard java files.
I basically can't get my mic to work in F12. After several releases fighting with pulseaudio, F11 finally worked almost OBO, after going to system->preferences->advanced sound configuration and setting all the input volumes to the maximum. But now there's no advanced sound configuration tool, and I just can't find anything to make it work. Skype isn't working, nor is gnome-sound-recorder. I do record some static, but nothing more. By the way, I'm on an Acer Timeline 3810T.
