General :: Is It Necessary To Add Root To Sudoers?
Jan 8, 2011Do I need it in /etc/sudoers? It's there by default and I don't know why does root need sudo.
View 5 RepliesDo I need it in /etc/sudoers? It's there by default and I don't know why does root need sudo.
View 5 RepliesThis is the hard way to learn when you MUST use visudo. That's right. I did something stupid like:Quote:$ sudo vi /etc/sudoersand now have:Quote:
$ sudo
>>> /etc/sudoers: syntax error near line 79 <<<
sudo: parse error in /etc/sudoers near line 79
[code]....
is it possible to do so? I mean, I want every user to be able to run '/bin/x' for example, as root without entering a password. I know the security risks, but I'm trying this in a risk-free environment which security does not matter very much.
View 2 Replies View RelatedI have tried several things to attempt to fix my sudoers file however it is still coming up with errors. The error says
[code]...
the sudoers configuration file is set to the default as I have ran a dpkg on it, have also uninstalled and reinstalled it, and went over the configuration file ensuring it looked like the defaults I had seen online.
The normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies View RelatedI logged in as root and was trying to add a user to sudoers, but then when I tried to save it said that the file was write protected and couldn't be saved. However, when I returned to look at the contents of the sudoers file, they were all done. The file is now empty.
1- How can I restore the contents of the default sudoers file. (I have FC12)
2- How can I add a user (no password) to the sudoers list without this happening again?
I changed the permissions of /etc/sudoers trying to make it writable using following command:
sudo chmod o+w /etc/sudoers
and now when i try to use the sudo command i am getting the following error:
/etc/sudoers is mode 0442 should be mode 0440
1.sudo command runs command as root,is that our name should be mentioned in the sudoers file of root?i got the error like this-"sandyain is not in the sudoers file.This incident will be reported."so what is that mean?
View 4 Replies View RelatedHow do I add a user in a sudoers file.
View 6 Replies View RelatedIn my sudoers file, there are lines that begin with #, lines that begin with % and lines that begin with neither. The # is definitely being used to comment out lines, but what does the % do? Is it a comment marker too?
View 2 Replies View RelatedAfter adding what I thought were the correct entries in /etc/sudoers so I'd be able to run commands without needing to sudo them, I keep having to. My sudoers file entries look like this:
Code:
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
user_me ALL=(ALL) ALL
## Allows people in group wheel to run all commands
%wheel ALL=(ALL) ALL
user_me ALL=(ALL) ALL
## Same thing without a password
%wheel ALL=(ALL) NOPASSWD: ALL
user_me ALL=(ALL) NOPASSWD: ALL
I have also confirmed that I'm a member of the wheel group in /etc/group:
Code:
wheel:x:10:root,user_me
And yet, I still have to sudo to do pretty much anything.
I added the following line in /etc/sudoers file
<username> ALL=(ALL) NOPASSWD:ALL
after adding this if I run any command it is not asking for the password. Now I need to shutdown the remote machine with sudoers user.
ok how do I include my username in the sudoers list?
View 4 Replies View RelatedRecently I edited sudoers file and did typing error. Now neither I can do sudo nor change it.
Code:
sudo visudo -c
>>> sudoers file: syntax error, line 8 <<<
How I can get correct the sudoers file?
I need to install a package. For that I need root access. However the system says that I am not in sudoers file. When trying to edit one, it complains alike! How I am supposed to add myself to the sudoers file if I don't have the right to edit one? I have installed this system and only administrator. What can I do?
Edit: I have tried visudo already. It requires me to be in sudoers in the first place.
amarzaya@linux-debian-gnu:/$ sudo /usr/sbin/visudo
We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for amarzaya:
amarzaya is not in the sudoers file. This incident will be reported.
amarzaya@linux-debian-gnu:/$
Relatively new to Linux, but I'm trying to grasp the proper way to modify the sudoers file. As an example, what would I have to modify in /etc/sudoers to allow a user (say 'user1' for the example) to be able to add/remove software through yum? I'm aware of the fact that I need to use visudo and how to use the vi editor. I've Googled this topic and while I've found a number of pages on the topic, I never see many examples.
View 5 Replies View RelatedWarning: Do not edit /etc/sudoers directly with an editor; Errors in syntax can cause annoyances (like rendering the root account unusable). You must use the visudo command to edit /etc/sudoers. In the previous section we added your user to the "wheel" group. To give users in the wheel group full root privileges when they precede a command with "sudo", uncomment the following line:
%wheelALL=(ALL) ALL
so i signed in as root and typed in visudo now i alreayd made the changes but how do i exit and save super+x doesnt seem to do it for me since im not using nano and not supposed to cause it causes errors
Recently I migrated from Ubuntu to Debian, first thing i wanted to do was to give myself sudo permissions and lock the roir account. By default sudo group don't have permissions to do this on debian, so i wanted to edit sudoers file by typing visudo. But i keep getting this
error: Error opening terminal: vanilla How can i solve this.
since a recent upgrade to Mandriva 2010.1 I am not able to 'sudo' as administrator or when I use the 'root' password. I am the only user on this machine (Dell Inspiron 530S multi-booted with Window's Vista Home Premium, Ubuntu 10.4, and Mandriva 2010.1). I can get into the 'Manage Users' section of the control center by authenticating as 'root' but I can't access 'sudoers file' from command line.
View 4 Replies View RelatedAn old machine in our office, running Ubuntu 6.06 all of a sudden will not boot up. I get the following info during boot:
Uncompressing Linux... Ok Booting the kernel
mount: Mounting /root/sda1 /root failed: No such device
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
[code]....
I haven't changed anything on the system as far as I'm aware, and I ran some HD diagnostics and everything seems fine. however when I try to mount the drive with the following command:
sudo mount -t ext3 -o rw /dev/hda1 /mnt
I get the following error:
mount: wrong fs type, bad option, bad
superblock on /dev/sda1, missing code
page or helper program, or other error
In some cases useful info is found in
syslog - try dmesg | tail or so
I ran fdisk -l and it says the partition type is Linux. The output after running dmesg | tail :
[12207.483801] init_special_inode: bogus i_mode (101)
[12207.483809] EXT2-fs: corrupt root inode, run e2fsck
[12260.427078] init_special_inode: bogus i_mode (101)
[code]...
Update: After running e2fsck -p /dev/sda1, I get the following info:
/dev/sda1: clean, 142449 / 9584640 files, 5402711 / 19161520 blocks
i used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
View 1 Replies View RelatedI created a chroot jail in /SECURITY/Jail. But when I used the command 'sudo chroot /SECURITY/Jail' to enter the fake root, I got an error message likegroups: cannot find name for group ID 105groups: cannot find name for group ID 119.
View 1 Replies View Relatedi just installed linux mandriva 2009. i set password for root and created a user account. when i try to login as root, after logging out as user, it does not allow me and gives the error "root logins are not allowed". even it does not show the root account. if i try to go to root from konsole terminal using su root, it allows to enter as a root but when i try to start the GUI with startx it gives error.not sure what to do and why i can't see my account in GUI mode
View 5 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View RelatedMy linux distro is CentOS 5.3. Today I edited /etc/sysconfig/readonly-root and set "READONLY" to yes, now my /etc/sysconfig/readonly-root file is like this:
# Set to 'yes' to mount the system filesystems read-only.
READONLY=yes
# Set to 'yes' to mount various temporary state as either tmpfs
[code]...
I am trying to install google chrome on my computer, it is in a .deb package and I am using dreamlinux. Earlier today I installed a .cbr/.cbz file reader from root, that was also a .deb and it worked just fine. now I go to install google chrome and it says (Blue is my command, and red is the system response):
I checked under my USER GROUPS and Root is still set as root, and I haven't been using it unless I need to install with it to other directories, Should I be using another command to install? or is it a problem that may affect other aspects of my system? ... My biggest concern is not getting google in, I can wait for that ... I just wanna know why ROOT is under the impression it's not a superuser.
I have a machine which has only /opt with some decent amount of space where I can install a software. /opt belongs to root:root. The software I want to install cannot be installed as root user.
So lets say I create a directory called /opt/install1 and then chown -R install1 to belong to user1. And now I install the software under /opt/install1 with user as user1.
Is this a best practice violation? There could potentially be just /opt/install1 belong to user1 and in future everything else created under /opt belonging to root..
I am trying to log into a server with a particular account. Let's say I don't know the password for that account. Can I do this using ssh? I am wondering if it is possible to do it in one command, instead of logging in as root and running su.
View 4 Replies View RelatedI have installed debian 6 recently, and during installation I selected not to allow root login (and thereby enable my standard user to use sudo).If I check sudoers (by using visudo) my standard user is not listed anywhere, but he can still use the sudo command without any problems.Where else could this permission be stored?
View 5 Replies View RelatedI am going to school for IT Security and will be taking my first Linux class this semester. I have dabbled a little bit in Linux before this but never really had the time to get to involved so I put it off untill now. Now I am forced . Anywho...I just installed Fedora11 (dual booting with Vista home basic) and the first thing that I am trying to tackle is install VMware. I have access to a bunch of Window OS's because of school and would like to create a 'virtual' version of windows for things like iTunes. This way, i have to force myself to use Linux for everything and I can install it on the whole PC. Until then, I am going to dual boot. When I was trying to install VMware, I tried to do it from the Terminal using sudo sh then the file name which is a .bundle file, I typed in the password and it said that my account was not in the 'sudowers' profile or something like that. I read on-line that you can modify who can sudo and who can't in the ect/sudoers file but if has an 'X' at the top right and I can't open it. It says 'Could not display "/etc/Sudoers". I tried to use visudo in the terminal and it says that permission is denied.
View 2 Replies View Related