I am trying to use Lguest(hypervisor of linux kernel) of the first time, on ubuntu 10.04 with kernel version 2.6.32.33. One of the instructions of the running operations is: "Make sure that you install a getty on /dev/hvc0 if you want to log in on the console!". How do I install a getty? By the way, /dev/hvc0 is not present in my system, do I need to create it?
View 2 RepliesI am trying to use Lguest(hypervisor of linux kernel) of the first time, on ubuntu 10.04 with kernel version 2.6.32.33. One of the instructions of the running operations is: "Make sure that you install a getty on /dev/hvc0 if you want to log in on the console!". Does anyone understands what this means? How do I install a getty? By the way, /dev/hvc0 is not present in my system, do I need to create it?
View 2 Replies View RelatedI try to setup a small Debian system running on command line. Remote access shall be possible via ssh (for now also telnet) and a serial connected minicom via getty. I need the serial access as fallback in case the network is down.
As long as the package adduser is not installed, I can login as root via telnet and getty without problem. But from the moment "adduser" is installed with apt-get, the serial root login always fails after entering the right password with the message "Login incorrect". Even de-installing "adduser", or using a brand new "adduser test" user. When installing and using SSH it allows to login successfully, like telnet.
BTW: A dangerous behavior I observed with telnet: When I opening the connection via telnet, I'm immediately logged in as root - without asking for a password! I set a password with passwd which also is requested by SSH and getty (before the adduser installation) but not by telnet?!?!?
The /var/log/messages adds a line if login with su, but nothing when fails with getty
Here is my inittab:
Code:
# /etc/inittab: init(8) configuration.
# inittab,v 1.1 2006-07-27 08:58:03 lothar Exp
# The default runlevel.
id:2:initdefault:
[Code].....
How to change the console login prompt settings in slackware 13.1 x64? I tried googling but couldnt find anything, maybe I dont know what it's called.. I mean when the system boot and boots into console asking login info, how to reset the console to new page/clear screen(clearing all the boot up info lines) before it prompts to login. Like for example if after logged into a tty I type exit, I want the screen to refresh(reset?) such that all screen info is cleared and only login prompt is shown on the top left of the screen, like in fedora shell prompt.
View 2 Replies View Relatedi am using ubuntu. Trying to instal apt but all in vain.
it gives error as
sudo : apt: commond not found.
it is not installed as default.
I am using Lenovo laptop with Windows 7. As i am preapring for RHCE exam, I need Red Hat linux to be installed.Unfortunately my CD-ROM is not working and I want to install linux using USB Pen drive.
View 1 Replies View Relatedif anyone has an IM and would be willing to help me in installing vnc and a gui on my centos server.
View 8 Replies View RelatedI have windows xp on my dell but I lost the drivers disk so I want to install linux Fedora 13 instead and wipe the windows xp. I burned the iso to a dvd and loaded up the live session user and used "Install to harddrive" but when I get to the partitioning window there is no harddrives to install to so I cant overwrite the windows drive (/C:)..
View 1 Replies View RelatedDo you know how can I install apps in other folder than usr automatically? (using dpkg and make install)
I want just to install it for example in special folder in my home partition (for example /home/usr).
I had previously partitioned my harddrive and installed Linux on one part of it. I had a few problems and didn't like the way Grub stayed when I removed Linux. Here's what I have now: I reformatted and have Windoh's XP on C drive with 70GB. I made a D drive with 70 GB.I want to install Linux on the D drive (I think...unless I shouldn't do that.) How will I access Linux if I do this? Will my computer boot into Windoh's by default as usual? Will I double-click on "My Computer" then choose The D drive with Linux installed on it? I don't want to have to go through removing the Grub thing as I had to do last time I removed Linux.My ideal thing would be to be able to double-click on D drive and run Linux without having re-start problems with my computer.I'm sorry if this makes no sense. I don't really know how to explain it.
View 5 Replies View RelatedI wanted to install RT Linux on my Fedora or UI wanted to install RTbuntu. I am following installation steps from INSTALLATION doc from Rt LInux (FSM Labs free one).
View 4 Replies View RelatedI am trying to install software in the software directory which by default belongs to the user:group root:root.
Lets I create a user called user1 belonging to group group1.
And I create a directory called install1 under /opt
So from /opt, I do:
chown -R user1:user1 install1
Now install1 directory belongs to user user1 and group1.
Question is that in the full path /opt/install1, the parent directory belongs to root:root whereas the child directory (install1) belongs to user1:user1. Now when I install software as user1 and give that Path to install as /opt/user1/blah1 , is that ok?
Just wondering because /opt is root:root
I am having issues with version 3.6 and using vmware server. I was told to install 3.5 but everytime I remove 3.6 and attempt to reinstall 3.5, ubuntu lucid simple installs 3.6. How can one install a previous version of a program without having apt-get install the newest version
View 3 Replies View Relatedi wish to install caffeine on my bt3, where can i get that?
View 1 Replies View Relatedam trying to install and i get this kind of an error:
View 2 Replies View RelatedI use RHEL 3 , but do not have installed the package for rcp , so now can not receive file via rcp , can advise what package that I need to install for using rcp ?
View 11 Replies View RelatedI just downloaded Ubuntu remix Netbook edition 10.10. during the installation i wasnt paying attention and I downloaded the 32 bit version... The thing is the Unity interface is not showing up, and perhaps its becuase of this 32 bit thing. Anyway I would like to install the 64 bit version, not . Ive read around that the best way is to uninstall everything from windows (its dual boot) and re install. The problem is I dont have a windows xp start up cd, so that wouldnt work, or would be complicated.
However somewhere I read I could install over it, and I would like your thoughts. First off how would that work?? Ive learned my lesson not to play with the OS... to how to delete Ubuntu, without a Windows xp CD. To make it harder I dont know anything of computers so yay!
I'm new to Linux and have a CentOS system, i downloaded p7zip (a file that extracts rar, 7z etc) but don't know how to install it or use it, would someone help me out here?
View 14 Replies View Relatedhow to install a exe app on linux using the terminal!
View 9 Replies View Relatedso my new job had me install Linux on a laptop at work, the laptop will be handed off to multiple users, 3 total (for now) The HDD is about 320gb, I believe. First, they just said "Install your flavor of linux", so I installed ubuntu 10.4. Then he said "Make sure you split it into 3 partitions, all boot-able...
fml. So I suck at managing partitions, I took up 100% of sda1. HTF do I split that up, without losing all of my data? My guess is I would need to boot in from a bootable DVD, unmound sda1, then..Im googling it now, but id love to go into work and already know what to do, lol
I have an older desktop with 233 Megahertz processor and one main hard drive 6 GB and a second internal hard drive 4 GB, with only 64 megabytes of RAM. I have installed Windows XP Professional on the main drive. It runs but too slow. I want to wipe/delete the partition and format the hard drive(s) and install a light version of Linux. The computer will be used only for internet and email and light word processing.
View 14 Replies View RelatedCan I install it on my iPod ? What website do i go to to download? What are the "pros" of installing Linux on your iPod?
View 6 Replies View RelatedI'm currently running crunchbang linux 9.04.01 on an Eee PC 900HD netbook and I want to install crunchbang 10 statler but I won't have a usb drive for a few weeks and my netbook has no cd drive. I'm looking for a way to install the iso directly onto my hard drive without any installation media
View 9 Replies View Relatedi have installed unbuntu 9.10 and i have even successfully installed ns2 2.33 in it , but i am not able to excute it as it is showing me this error bash: 2.33/tcl8.4.18-3/unix:/home/sangamesh/ns-allinone-2.33/tk8.4.18/unix: No such file or directory as in this version of ubuntu we have tk8.4.19 only but it needs tk8.4.18 , even the tcl8.4.19 also same problem.
View 3 Replies View RelatedI'm trying to instal RH 5 64 on an IBM x346. In the BIOS I enabled host raid (could not see disks if disabled) and setup a RAID-1 (mirror) 2 HD's. I have then proceeded to install RH 5 (using the GUI) on to the mirror which appears to have installed fine. When I reboot the system is seems to boot to the OS but the screen is black with a few thin white lines appearing on the screen. I thought this may be related to the on-board graphics soo I installed it again on another x346 (except this one had more memory). Upon rebooting this post install I am presented with the Error booting OS.
View 3 Replies View RelatedI am trying to install GMT [url] but this is the first thing I have ever tryed to install in Ubuntu (I only got it today). I have downloaded the 2 files that it requires (install_GMT and GMTparam.txt).
It says I can use GMTparam.txt as an argument, what does this meen?
When i was trying to install java through the terminal the OK button was not active after reading the software disclamairre! all it said that it was still configuring java!
View 2 Replies View RelatedInstall process gets all the way through to the point where it's copying files from CD to hdd. As soon as it gets to 100% my screen goes blank and it freezes up like that. The monitor then goes into standby mode, like it normally does when not connected to the computer (the green LED turns to orange). There is no command line or anything, I have to press reset button at this point. I can run live from the CD though.
Tried the Check Install Media feature and it gives a readout that md5sum is ok
md5: 62210a3034990b44bad86e8d2d69a271 **I have absolutely no clue on how to do this md5sum stuff, especially in Windows XP, so I just skip doing it and go right to burning CD/DVD**
Media is OpenSUSE 11.4 KDE liveCD on a Memorex CD-R 52x, burned at 8x (lowest I was able to go)
Hardware is: Pentium 4 with HT @2.8GHz, 1.5GB DDR, GeForce 6200 graphics (AGP)
Running Window XP Pro on main hdd
Should I figure a bad burn or something related to the CD-R I burned? In which case easy fix is to just download the DVD version and burn that (should have been my first choice I know). Or possibly an incorrect setting in BIOS? There is an option for OS/2 or Non OS/2, maybe its set wrong? I believe its currently set for Non OS/2 which was the default.
**The system I'm installing to is listed in my signature, which lists all the hardware I'm using.**
I am trying to install ns 2.29.3 in fedora 12. But while installing I get this error msg.....
Build Tclcl-1.17
No .configure file found in current directory
Continuing with default options...
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no .....
make: *** [Tcl.o] Error 1
tclcl-1.17 make failed! Exiting ...
I am using UBUNTU8.10 via VMware in windows vista os. i had installed ns2.33 in this way
$ tar -xzvf ns-allinone-2.33.tar.gz
$ cd ns-allinone-2.33
$ sudo apt-get install build-essential autoconf automake libxmu-dev
[code].....