General :: How To Redo Dual Boot OS
Oct 24, 2010
I have an OSS 11.3/WinXPPro dual boot system. Unfortunately, Windows is a mess because of a botched restoration. I guess I need to start again from scratch. I assume if I attempt to reinstall Windoze that the whole dual boot system is going to get botched up anyway.I would like to know what would be the best approach since I am going to start by installing Windoze to the HD. Here is a readout of what I currently have from gparted:
Partition / File Sys / Mount Point / Flags
/dev/sda1 ntfs /media/sda1
/dev/sda2 extended boot,lba
[code]...
View 9 Replies
ADVERTISEMENT
Apr 3, 2010
I am trying to install Gentoo. Currently I have windows 7 on my primary Hard Drive.I decided to add in a second HDD that I got for free and use linux on that.I got through my entire install and at the end I accidently wrote grub to my second hard drive.When I rebooted it went straight to windows.So I have some questions. When installing to the secondary HDD does my boot partition and swap need to be on sda? or can they reside on sdb?Also I tried to re-issue the grub-install command and it said bash: command not found. How can I get grub to re-install? I tried to emerge it and same issue no command found.Do I need to redo the entire reinstall?My last question is If I have more then enough HDD space how much is too much for linux? Most people say 30 GB is all you need from what I have read but I assume 160 GB is going to go to waste?
View 3 Replies
View Related
Nov 2, 2010
i was trying to make a script to redo a chmod on a folder every 15min. by using crontab (*/15 * * * * /(link to script.sh)
now i didn't know much about the use of the scrips so i just write in the command i would in terminal chmod -R 664 /data/
i try to run the script in terminal and now i can't see the files in that folder. but acording to the folder properties, i am still using the disc space where the data use to be, so the data in the folder doesn't seem to be deleted.
the main focus i want is how to get the data back. scripting and others can come later.
how can i get to see my data again?
View 6 Replies
View Related
May 1, 2010
How do I redo a dist-upgrade? Looks like I broke something during upgrade and now I don't want to restart until I forced the upgrade routine to run a second time.
View 2 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Dec 15, 2010
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
View 2 Replies
View Related
Jun 24, 2011
I am working on another's Dell Inspiron 530 with Vista 64-bit; see below:
[code]....
wanting a dual-boot, 500GB hdd was formatted as above, Win Vista x64 Recovery CD was created, and antiX-M11 (as Swift Linux 0_1_1) installed. Now, at startup, machine boots to antiX and not Vista. User wants it the other way around. I think I should have reordered the partitions and not installed GRUB in MBR. EasyBCD is the preferred boot loader for User. This is a learning experience but due to time constraints and not being at my home where references are available, EasyBCD is on a USB stick -- should I boot to the Vista Recovery CD and then try to install EasyBCD to sda3 from it, uninstall antiX (but this will not fix the MBR problem, will it?), or edit fstab or what
View 5 Replies
View Related
Sep 7, 2009
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies
View Related
Feb 23, 2010
I have a netbook with limited storage. 8GB internal and a 16GB SD card. Right now I have Ubuntu installed on the 8GB internal storage with a few directories mounted on the 16GB SD card. (/usr and /usr/local). This has worked out fairly well for me as having the entire installation on just the 8GB drive was too limiting. When I tried this I didn't know how big to make the partitions I was mounting in. These partitions are 7.06GB for the root (on internal storage) 2.8GB for /usr/local and another 2.8GB for /usr (both 2.8GB partitions are on the 16GB SD with the extra space being media storage for me). It seems I didn't make these partitions big enough because I can no longer perform updates. I'd like to redo all of this from scratch. how would you recommend I partition this next time around? Do I need individual partitions for the separate mount points that aren't root? Are those the directories I should be mounting on the SD card?
View 1 Replies
View Related
Mar 28, 2010
Old Boot drive in new PC (XPPRO + Ubutnu) Run the XP repair BUT still have Error 21, used XP repair console to repair MBR still have problems.
View 1 Replies
View Related
Feb 3, 2010
I currently have fedora 10 installed and want to set up the hdd to dual boot xp. If anyone could give a guide or suggestion on the best way to do this it would be great. I prefer to not start over even though it would be easier to dual boot linux into an xp host.
View 1 Replies
View Related
Mar 6, 2011
Haven't been browsing for long, so this may have been covered already. I'm sure it's a common question but which distro would you prefer for a dual boot on a laptop, running alongside Vista? I've shrunk my Windows partition and opened a 10GB space for new business. I don't know a lot about different distros but boot Ubuntu 10.10 and XP on my desktop. Would this be the best choice?
View 2 Replies
View Related
Feb 23, 2010
how to uninstall linux on dual boot with win XP ??
View 7 Replies
View Related
Dec 29, 2010
I am going to install the newest version of Ubuntu on my computer. I am currently running Vista. I would like to be able to dual boot. I understand the whole partitioning deal and booting from the cd but i am worried that doing so will overwrite my Master Boot Record for windows. Do I need to modify the GRUB2 after installation. Read many writeups but was hoping for some input.
View 1 Replies
View Related
Nov 21, 2009
Now that ive finally got XP and Ubuntu on my system, i thought id try to get rid of that DOS looking boot! :s
To explain my situation (probably default) when i start up after bios a black screen appears with a list of options:
1. ubuntu
2. ubuntu recovery
3. xp
4. xp recovery
something like that not sure the exact order or titles...
What i wanna do is make it have a GUI where i select which OS i want.
View 14 Replies
View Related
Jul 3, 2011
I have one hard disk partitioned into four logical drives.
1.20gb for red hat 5 //installed after installing window xp
2.40gb for Win xp //Installed first
3.40gb not formatted yet
4.more than 50gb for data storage.
After all the installation,I can just boot Red hat 5 but it shows the prompt for window xp also to boot in boot selection screen.When I entered for window to boot,I have this message-
[Code]...
View 5 Replies
View Related
Feb 19, 2010
How do I erase windows completely and just run puppy. Also how do I download and install damn small linux.
View 4 Replies
View Related
May 25, 2010
How would I go about dual booting Puppy with Xp?
View 2 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Jun 18, 2011
I have Windows 7 on my Dell Xps laptop, and I want to install Ubuntu or Fedora as a dual-boot. Will that cause my system to slow down?
View 2 Replies
View Related
Jun 29, 2010
It's been a while since I last installed a Linux distro on a machine that already houses another OS. I want to install OpenSuse (11.2) on a spare external drive that I have which will be connected to my PC through USB. The PC however, houses four other drives: one drive that has WinXP installed on it (NTFS) which is my normal boot drive, and three data drives - all NTFS.
Like I said, I want to install OpenSuse on the external drive through a network install. I don't want to end up with a boot menu where I can choose between OpenSuse and XP, I simply want to boot from the XP drive by default and boot from the USB drive when I tell my system to do so (I can call up a boot menu where I can tell my PC from which drive to boot).
Now I have done this many times - albeit too long ago to remember how I did it. I do remember however that last time I tried to do it, it installed a boot menu on my XP boot drive, and I had a hell of a time removing it. What do I need to look out for to prevent this from happening? How do I make sure nothing is changed on the other four drives? (The safest way would be to simply disconnect the other four drives from my system and install OpenSuse on the USB drive of course
View 1 Replies
View Related
Feb 7, 2011
In my recent tribulations getting Linux based tools working at work I've gotten a lot of good answers just by searching here. But since this question is very subjective, and details are important, my searches just weren't quite working out.
I've been using Linux off and on since 94, Slackware... a stack of floppies as long as my arm. I say off and on because I've always been of the opinion that Windows had a superior selection of ready-to-run desktop software... I still think that's true, but since I'm pushing open source more at work ($44K a year to use Exchange? Seriously?) I figure it's time to throw in behind it at home, too.
My biggest hangup with a total transition is gaming. I can handle my desktop suite needs just fine with Open/LibreOffice and Seamonkey. The limited work I do with graphics and sound can be handled just as easily with existing open source applications (though I'm not really sure about video playback, yet. Finding good codecs for HD video that work well with Linux based players, WMP and Windows Media Center is kind of a pain in the ass.) Hell, pretty much everything I do on a day to day basis... a drastic improvement over 5 years ago.
The games, on the other hand, are killer. Two of my off and on favorites, World of Warcraft and EVE Online are reportedly well supported by Wine. A good chunk of my game collection, though, was purchased through Steam, which I understand has some issues with Wine. And there's also concerns about future games that get released ... some of which is offset by the constant improvement in Wine and similar packages.
What I'm considering as an option is simply going with Xen for a paravirt Windows guest and running my games in that. What I need to know, though, is how well will that conceivably work? Will a Windows XP or 7 (which one would I want?) guest in a Xen DomU have better gaming support than Wine provides? What other things am I not taking in to consideration that I should? Should I use Xen or whatever the free VMWare is (I'd prefer Xen, open source and all, but it VMWare would really do the job where Xen wouldn't...)?
AMD Phenom X4 955
8GB RAM
SATA 30GB SSD
2TB RAID storage which I would prefer to keep as a single chunk, but meh... it's 2TB.
I have installed CentOS 5.3-5.5, FC 13 and 14. Ubuntu, Debian and., all the major distros and all the hardware is supported by the prebuilt kernels.
Actual uses: MP3 rip/playback. Web browsing. Quicken. Occasional word processing/spreadsheet, media conversion including the dreaded DVD ripping (I buy the DVDs for my kids, but they can't touch them :P), and... hell, whatever it is that we do with our desktops and take for granted. Games. Lots of DirectX games.
View 3 Replies
View Related
Jul 27, 2010
Current rig:
Toshiba Satellite L455 laptop
Celeron 2.20 GHz
Windows 7, 64bit
3GB RAM
I downloaded the DVD release of Kubuntu 10.04, from Kubuntu.org. The file is: Kubuntu-10.04-dvd-amd64.rar . I burned it to a DVD, as image, with ImgBurn application. See any problems so far? I want to dual-boot, leaving my Win7 in tact. I am confident that I can handle this with some patient instruction.
View 14 Replies
View Related
Apr 12, 2010
What is the procedure to stop dual boot up in your BIOS on Linux?
View 5 Replies
View Related
Aug 17, 2010
I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies
View Related
Apr 14, 2011
Lost a small program I had for dual boot choosing. It was a small app that gave me to choice of what to boot first or gave me 2 choices at start up.
View 8 Replies
View Related
Sep 28, 2010
What is the best guide to use for me to install Ubuntu 10.04 on my iMac so that I can dual boot into either Ubuntu or OS 10.6.4?
View 5 Replies
View Related
Nov 2, 2010
I had installed mandriva first. I reserved 30GB for opensuse.Now, is it safe to just install Opensuse and it will autodetect my Mandriva and preserves it in bootloader?
View 14 Replies
View Related
Dec 24, 2010
I installed the linux(CentOS 5) as a dual boot in my laptop.When i entered in WindowsOS-XP my lan cable is detecting but when i boot in CentOS my lan cable is not detecting ie., i can`t able to connect the internet.Please help me out in this issue as soon as possible.U can reply me to this mail id sandhya.531@gmail.com tooooooooo
View 3 Replies
View Related
Nov 13, 2010
I am having some trouble setting up a dual boot with Win XP and Slackware 13.1. Lilo lists both Linux and Windows, but when I select Windows, all I get is a black screen. I have two hard drives, sda1 and sdb1. I first installed Windows on sdb1 (it is a smaller, older drive). I then installed Slackware on sda1 and selected to install Lilo on the MBR. I'm guessing that by doing this, I wrote over the Windows information that was already there. Could this be my problem? I feel like this should be an easy fix, but I just don't know where to start in order to fix it. If it helps, here is the end of my lilo.conf file.
# Windows bootable partition config begins
other = /dev/sdb1
label = Windows
table = /dev/sdb
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
[Code]...
View 14 Replies
View Related
