General :: How To Make A Boot Profile Permanent
Feb 15, 2010
I have a Finnix live CD. I can customize it by remastering it. When I boot with the live CD I need to make a little change in the boot profileThe boot profile before making the changes islinux apm=power-off vga=791 initrd=minirt quiethe boot profile after making the change become linux apm=power-off vga=791 initrd=minirt quiet root=/dev/sr0Now, I need to make this change (adding root=/dev/sr0) permanent. How can I do that?
View 1 Replies
ADVERTISEMENT
Feb 2, 2010
I have a generic monitor which has problems with many Linux distros. We can boos Sugar on a Stick v2 by pressing <tab> at the Sugar splash screen and adding the boot parameter "nomodeset". I'm handy enough to do this, but my wife, well, not so much. So is there a way to make that boot parameter permanent?
View 1 Replies
View Related
Aug 13, 2010
I use Ubuntu 10.04 and after installing the driver for my onboard video card, I can no long boot into Ubuntu. I'm thinking that if I was somehow able to remove it, this might fix the problem. Is there a way to do this, possibly from the boot cd?
View 4 Replies
View Related
May 2, 2011
I have just booted to Puppy (for the first time in my life) on a 6 y/o amd type with a 40Gb HD, Ram: 512.I would like to make a permanent install of puppy onto the HD, I have read various pieces on how to install, defraging, repartitioning, differing file systems. However, i am a bit lost. The computer will be used for e-mail, web browsing, and watching the odd film (films installed on the drive) - I am unsure as to the best combination of file types and partition in order to keep puppy happy and keep some compatibility with the world outside of linux.
For instance, could i have a small partition with the puppy install and setting, and the rest on a format that would be compatible with windows/mac/linux? If so, how do I do this, pls bare in mind that my windows install is running but incomplete. I have the feeling this will be a really simple problem for someone to help me with,
View 2 Replies
View Related
Jan 23, 2010
When I enter my bootloader Grub I have to go to the system I want to load and press e to edit. Then I add vga=792 in the end of one line to change the tty resolution. How can I make this change permanent? My distribution is Debian Squeeze and there is no menu.lst in squeeze.
View 6 Replies
View Related
Aug 9, 2011
I have a CentOS running. It is important to have my CentOS available when I am remotely connected to a VPN router. I tried to add a default gateway to the VPN router, but after reboot it goes away. How can i put this as permanent?
ip route add 192.168.2.3 via 10.0.0.1 dev eth0
View 2 Replies
View Related
Feb 15, 2011
I need to add rootdelay=130 to my grub menu every time I boot up. how to edting (which) appropriate file to make a permanent change?
View 2 Replies
View Related
Jan 28, 2011
I'm building the code on remote linux machines, and it takes very long time. Since all the filesystem is on NFS, I suspect the NFS is the bottleneck. Can I profile the build process (make all) down to system read/write calls? Or simply put, what tool do I need to find the bottleneck. Is strace gonna help?
View 1 Replies
View Related
Jul 7, 2010
I have switched to openbox from Gnome and would now like to stop using Metacity altogether. When I was using metacity I had both a control theme (e.g. gtk theme) and fonts set up how I liked them in gnome-appearance-proporties. When Openbox starts, it gets my window borders up properly (ofc.) but fails to render my fonts properly and uses the wrong gtk theme. I can't find anywhere to specify which gtk theme to use or what method to render my text with. After Openbox is finished doing it's thing, and I run gnome-apperance-properties manually, it will automatically set everything to it's proper value, but I don't want to have to do this as it takes several seconds to preform and I'd rather not have it jury rigged like this.
View 2 Replies
View Related
May 19, 2010
I'm running Ubuntu 10.04 and I've been looking to customize what's given as my command prompt, and I learned how to do this by entering PS1="desired text" which is remarkably straight forward.
I'm a little stuck on how to make this permanent though. If you just type in that command, then when you close that terminal session and open a new one, it resets to the old/default prompt. I read the tutorial at:
http://www.cyberciti.biz/tips/howto-...up-prompt.html
and it referred to editing the .bashrc file in ubuntu. I found the bash.bashrc file in /etc/ and edited the line that said PS1=, however it didn't change my command prompt. I searched for other files relating to bash and in clear instances that PS1= was given, I changed it to see if the command prompt would change. This has been to no avail so far though.
Does anyone know which file needs to be edited/what needs to be done in order to make a customization of the command prompt permanent?
View 6 Replies
View Related
Dec 20, 2010
I'm trying to make xrander changes permanent how can I do it?
View 2 Replies
View Related
Jul 19, 2010
I installed 11.3 on an eee pc 901 with the ldxe desktop. everything seems to work fine and out-of-box.
But when do some configuration changes on the touchpad using the gsynaptics-gui, the changes only last until the next reboot of the computer.
How can I make them permanent?
View 1 Replies
View Related
May 20, 2010
Http://ubuntuforums.org/showthread.php?t=961324
In this link, the last poster describes a way to disable tap click which I find VERY useful, but the thing is, after I reboot it goes away. Is there anyway to make this command permanent?
View 2 Replies
View Related
Mar 10, 2010
i has setup a persistent DNS cache to improve my web-browsing. it works wonders and with my ICC built firefox my web-browsing is laser-fast, pretty much like using internet explorer in windows! however, everytime i reboot, my modifications to /etc/resolv.conf have been replaced... 1st. the file must contain:
# Generated by NetworkManager (obviously modified by this)
nameserver 127.0.0.1 <----this is lost on reboot, and is needed to make it all work
nameserver 209.226.175.223
nameserver 198.235.216.134
i have tried to add this to - System/administration/network, but it doesn't seem to fix the problem. 2nd. my next problem is that when fedora 12 starts up,i need it to start "dnsmasq".i have tried to add it as a startup application, but it doesn't start automatically.so i end up having to start it manually everytime:
sudo /etc/init.d/dnsmasq start
it is annoying, but so far i just deal with it, because my browsing is that much faster! i am planning to post a tutorial for those interested in faster web-browsing in linux, but until i can make the changes perminent there isn't much point.
PS: i have tried to write a shell script to do this and every which way i try it fails
View 8 Replies
View Related
Feb 14, 2010
Every time I turn on my laptop, the alsamixer settings get reset. How do I make the changes permanent?
View 2 Replies
View Related
Jun 7, 2010
I came across very useful nautilus keyboard shortcut Ctrl-L - change view of location bar to display full folder address but can't find an option to make this changed view permanent. where can i find it? i don't mind editing config files
View 4 Replies
View Related
Jan 4, 2011
Since the 10.10 upgrade my mouse clicks on my laptop have been behaving rather oddly. Sometimes it randomly does a middle click when i'm doing a left click, which is really annoying because it means that sometimes tabs close or my text gets random bits of text appearing in it. I've found that running this command "synclient tapbutton2=2 tapbutton3=0 rtcornerbutton=0 rbcornerbutton=0 clickfinger3=0" fixes it, but only temporarily, sometimes it only lasts like 10 minutes or so, other times it lasts till reboot. So, is there anyway to make these changes permanent?
View 1 Replies
View Related
Dec 31, 2009
I would like to make group changes on serial ports permanent. I can become root and use chgrp:
chgrp uucp /dev/ttyaa00
but it only lasts until reboot. I think I need to add this line to a startup file but not sure where. I want this to work in run level 3 and 5 (at least). I have a digi portserver and their realport software. The ports are /dev/ttyaa00 through /dev/ttyaa07 and are in group root on startup. I want them in uucp so any user in uucp can use them. This is for F10.
View 4 Replies
View Related
Jun 23, 2010
I recently compile Kernel 2.6.34 (to fix the AMD PowerNow issue with 1055T processor, and it worked!) However, the device
/dev/shm
starts up at boot as Read-Only.
Google Chrome requires this device to be user-writable, or it won't start up. Presumably, the stock kernels (and all that are updated) have it set to User-Write. I have not noticed any other ill effects with the permission being read-only. If I do:
sudo chmod a+w /dev/shm
Everything will work from there, but each time I reboot, I have to do that. How do I make that permission-change permanent?
View 5 Replies
View Related
Apr 23, 2010
I set up a squid transparent proxy and I have a problem with an iptable rules. I have a rule to redirect all request to port 80 to go on port 3128. To do so, I'm using this iptables command :
Code:
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128
This command is working like a charm. The only problem is, for some unknown reasons, this rule will be dropped at some point. I did not manage to identify what is causing this to happen. It occurs during night, but I have nothing about that in my log files. messages / firewall / ...) The only way I managed to reproduce this 'dropping' is this one: I type the command like as root. The command is effective and working fine. I open yast, I go to the firewall module, the I do a simple "save changes and restart firewall" (without changing anything). As soon as this process is finished, the iptables rule is gone.
-How can I make this rule permanent ?
-Is there a place where I can launch a script executing this rule, after the yast firewall module is 'touched' or something ?
View 3 Replies
View Related
Feb 3, 2011
Every time I turn on opensuse, I have to go into terminal as superuser and type:
/sbin/ethtool -s eth0 duplex full autoneg off
But this is only a temporary change.
View 7 Replies
View Related
May 20, 2010
I have an eeePC 1005HA, with a Linux Mint 8 distro on it. Each time i start it, i slide down the lcd brightness to take the power consumption low, using the Power Manager Brightness Applet on the gnome panel and each time i restart the pc i have to repeat this over again,I'd like to make this change permanent.
View 2 Replies
View Related
Jun 10, 2010
The idea is that I got to grips with Linux a couple of times in the past; most recently in a Radio Astronomy class (where we had to use openSUSE and terminals 24/7). I loved it so much that I fired up Wubi on my laptop and I am having a play.
Then I loved it even more.
So here's the plan:
Find Windows (Vista) CD *sigh*
Get 500 GB external Hard Drive
Backup files to HD (60 GB max)
Reformat Laptop & Reinstall Windows
====
To my understanding, this gives me a blank slate with a lot of room to play with because of the external HD. If this is not possible/too risky etc. then what are the best alternatives?
The plan is to make my primary OS Ubuntu. The way I figured, to keep things simple, is to keep the laptop's HD with Windows as 'normal'. I would thus install Ubuntu to the external HD, and put my files etc. on that.
Now, is that possible for a clean installation? Ideally, it would be fantastic if the boot can be configured so it would boot Ubuntu if the HD is connected, and Windows if not.
View 9 Replies
View Related
Feb 14, 2011
just can't find the answer for this one (after Google and these forums) So I want to configure my Synaptics touchpad in this fashion:
Code:
synclient RTCornerButton=8 RBCornerButton=10 LTCornerButton=11 LBCornerButton=12 FastTaps=1 This line of code does what it's intended of it. However, the changes made don't really stick after a system reboot.I'll explain:
So, the "FastTaps" part works flawlessly (as intended). However, the corners bit doesn't work after system reboot!...and weird enough, if I set up a start up script with that bit of code on it it'll only remap the last two corners (LT and LB), because RT and RB always get automatically set to "2" and "3". It's obvious then that those corners are getting remaped somewhere I haven't found yet. I've already tried ppa:yurivkhan/ppa and adding new options to "usr/lib/X11/xorg.conf.d/10-synaptics.conf" to no avail either. how to make the remap of touchpad corners permanent? P.S. - I'm using Ubuntu 10.04 LTS with Macbuntu.
View 3 Replies
View Related
Dec 9, 2010
I am using Ubuntu 9.10 Desktop Version and the entries did in /etc/resolve.conf all the time it is cleaning as and when i am restarting my systems. How to make is permanent solution to keep all the entries done in /etc/resolve.conf
View 1 Replies
View Related
Feb 24, 2010
I'm having some difficulty setting my txpower setting on my atheros wifi card. I am using ath_pci driver on ubuntu 8.1 64 bit. I can set the txpower to whatever, 12dBm for example, it accepts the change but quickly reverts back to a default value of 8dBm. Power saving is off. How can I make these changes permanent, or adjust the default value?
View 2 Replies
View Related
Jan 31, 2010
switched from OpenSUSE to Ubuntu, largely to make things consistent with my netbook running Ubuntu 9.10 Netbook Remix I replaced the / partition but left /home intact I was wondering how to make Thunderbird use the profile already established rather than set up a new one?
copied /home/user/.thunderbird directory to /home/user/.mozilla-thunderbird
View 1 Replies
View Related
May 23, 2010
Whenever I boot into ubuntu 10.04, my monitor just automatically goes into sleep mode. As soon as I select to boot into ubuntu, the monitor just sleeps. There's no getting out of it. Booting into windows works fine though, so the problem has to be ubuntu.
View 9 Replies
View Related
Jan 17, 2010
I'm wanting to use some Emerald themes. I start the compiz icon and do the settings then when i restart the settings don't stick. Does anyone know how to make them permanent?
View 5 Replies
View Related
Jul 28, 2010
How do I share default profile file by NIS so that I do not have to setup profile in every NIS clients?
View 3 Replies
View Related
