General :: How To Export Display Back To Get GUI Interface After Logging In Via SSH?
Jul 2, 2010After logging in with Putty, isn't there a way to generate a GUI display?
View 1 Replies
ADVERTISEMENT
Ubuntu Servers :: Unable To Export An X Display Back To Desktop To Run The Oracle Installer?
Aug 17, 2010I'm new to Ubuntu and I'm remote from the server. I'm setting up an Ubuntu server 10.04 x64. My intention is to load Oracle 11g, however I know I will need to be able to export an X display back to my desktop (Solaris) to run the Oracle installer. What do I need to load to get X working enough to export the display back to myself. I need to provide additional information. Since I'm new I may not have adequately covered what's needed.
View 4 Replies View RelatedGeneral :: Export Display From MAC?
May 6, 2011 I am trying to run matlab on a remote mac through my laptop at home, which is a linux-based. I am not able to export the display. Here are the steps I followed.
1. xhost +remotehost
2. Log into remotehost (i.e., the mac machine)
3. export DISPLAY="192.168.2.2:0.0"
4. matlab
But I get the following message,
"unable to open display 192.168.2.2:0.0"
The reason I typed in that ip address in step 3 was that is the ip listed in the "wlan0" block when I typed "ifconfig -a" on my local linux laptop.
General :: Export Display From A Terminal To A Windows PC?
Aug 20, 2011Exporting display from a Linux terminal to a Linux desktop is easy; you do the following:
On 192.168.90.121 (localPC):
xhost + 192.168.10.164
On 192.168.10.164 (remotePC):
export DISPLAY=192.168.90.121:0.0 <br/>
firefox
The Firefox window appears on my localPC. In the above case both PCs are Linux.
Can I similarly export the Linux display to a Windows PC? In the above example, localPC would be Windows and remotePC would be Linux.
General :: Export Contacts And Email Back To Windows From Ubuntu
Oct 26, 2010Taking all Contacts and Emails temporarily back to Windows for safety - whilst I install Mint in place of Ubuntu. Using Thunderbird. I have checked the help files and checked Google.
View 14 Replies View RelatedGeneral :: Create A Nagiosadmin Account For Logging Into The Nagios Web Interface ?
Dec 24, 2009The code below is used to create a nagiosadmin account for logging into the Nagios web interface
Code:
I am now using PCLinuxOS as the monitoring host (where nagios is installed). PCLinuxOS returns this error :
When I type that line.
General :: Logging In Sends Back To Xubuntu Login Screen?
Feb 17, 2010When I start up my computer Xubuntu is asking me to login (which is strange as I have login disabled). Then, when I do enter my password, it is accepted and after a few screen changes I am returned to the login screen. (I know the password is correct as the login screen informs you immediately if you enter it incorrectly.) Also, I can see that my display settings have been changed--the monitor resolution is wrong--my cursor is way big as are buttons, text etc..
View 3 Replies View RelatedSoftware :: Unable To Export The Display
Jan 20, 2010i am getting below error message when i am trying to install a product
InstallShield Wizard
Initializing InstallShield Wizard...
Preparing Java(tm) Virtual Machine...\
[code]....
OpenSUSE :: Export Variable In Subshell Back Out To Parent?
Apr 29, 2011Is there any way to use "export" inside a bash script that will affect the variable in the parent process (i.e. the terminal where the script was run)?
View 5 Replies View RelatedProgramming :: SED Processing - Export Progress Bar From Wget Display
Nov 2, 2010I am attempting to "export" the progress bar from wget display using sed. Basically, we have an app that starts wget to download a large file and we want to show a progress bar. Our application has a dbus interface to receive the download progress.
So we were think of a command like:
wget [] | sed [] | dbus-send[]
The problem at the moment is, how do you get the matched string out of sed and into dbus-send? I can get the progress string by:
sed -u 's/[0-9]*%/&/'
This populated '&' with the correct percentage, but I cannot seem to get this out of sed.
General :: Reverse Of Ctrl+alt+F1 / Get Back To The Windows Display Manager?
Jan 31, 2010The full screen console is brought up by ctrl+alt+F1. How do you get back to the windows display manager? Is it necessary to reboot?I am running Ubuntu 9.10 with Gnome.
View 3 Replies View RelatedUbuntu :: Logging Out And Back In Kills Compiz
May 3, 2010I'm running PC/OS 10.1, which is based on Xubuntu, I've got Compiz and everything installed on here. However, if I've got Compiz activated when I log out, I find myself with no titlebar or frames whenever I log back in. Thankfully, this is easily corrected by opening the Fusion Icon and going back to Xfwm and then going back to Compiz, where I have the titlebar and frames and eye-popping effects and the whole nine yards. But it'd be a lot nicer to not have to deal with having to correct that every time I log in in the first place.
View 1 Replies View RelatedUbuntu :: System Will Freeze 2 Times After Logging Back In
Nov 9, 2010I recently installed ubuntu 10.10 and am completely new to linux. Something I recently noticed is that my whole system will freeze 2 times after logging back in, but after that it works fine. I will log in, then it will work fine, but shortly after it will completely freeze. After about a minute, it will unfreeze and everything will work fine. Then after a little longer, the exact same thing will occur. After the second freeze and unfreeze, it never occurs again until I log out and log back in. I do not believe this occurs when first starting the computer.
View 1 Replies View RelatedSoftware :: Video Editing Software That Will Export Back To Mini DV Camcorder ?
May 25, 2011I usually use dvgrab to make an .avi file from the video on our mini dv camcorder and save it to my pocket drive.
Right now I edit this from the pocket drive in Windows 7 on my laptop with Sony's Vegas movie studio HD 9.0 I'm having issues with the laptop lately and with out bogging down in too many details I have to burn the edited video back to the mini DV tape and transfer speeds are causing me problems.
Is there a Linux video editing software that would let me export back to the camcorder? OpenShot doesn't seem to have that option and from what I remember of PiTiVi it doesn't either.
Ubuntu Security :: Seahorse Export Menu Is Always Disabled - Export The Passwords To Restore It After Formatting Machine?
Jun 12, 2010seahorse export menu is always disabled. I need to export the passwords to restore it after formatting my machine.
View 1 Replies View RelatedUbuntu :: How To Get Back To X Interface
Dec 12, 2010I had problem with installing Nvidia, I install all available packages for Nvidia from Synaptic, restart the computer, and that is it. I can not access the windows interface anymore. Every time I restart my computer I got to TTY mode. I run Xorg.0.log and It seems that I have problem with the graphic card. I tried alt+ctrl+f7 and no luck. How can I get to safe mode or x interface (I believe it is called GUI or GDM!!!)? Do I need to reinstall ubuntu again?
View 9 Replies View RelatedUbuntu :: 11.04 How To Get Back To The Old Interface??
May 2, 2011I have a problem and it's for days now, I really can't get used to it to the new interface, so how to set it back to the old interface like it was on the older Ubuntu versions?
View 9 Replies View RelatedUbuntu :: Getting Graphical Interface Back?
Feb 25, 2010ive edited my xorg and now when i start up ubuntu I cannot see the login interface
View 9 Replies View RelatedCentOS 5 :: How To Get Back Regular GUI Interface For Desktop
Jun 28, 2011I am some LinuxUNIX history but still consider my self a newbie.I know Microsoft OS well and am more comfortable with that but willing to learn Linux as well.I have a CentOS 5.5 Server I am using to Host over 18 other sites with a PERL / Web based application.The application and hosting are still working but since the CentOS updates I ran this morning my Session (I think that is the correct word) will only load a black desktop with the top menu bar only having the terminal icon and the bottom having a desktop icon; whereas prior to this update the default CentOS blue backdrop with white flower pattern and Applications, Places, System with the terminal icon and other icons displayed and the clock was off to the right.I think this is the Gnome GUI?
Also On Friday 6-24-11 I added a device line to the /etc/fstab so that my CD/DVD device would load up at boat time. I would not think this to be causing the problem.Please advise me on how to get back my regular GUI interface for this Desktop.
Ubuntu :: Switch From Unity Back To Old Netbook Remix Interface
Oct 26, 2010Having just upgraded to 10.10, I've discovered Unity, and I'm afraid its not for me. I absolutely loved the previous interface, and was quite shocked and saddened to see it disappear. But I'd like to keep all the other new software that comes with 10.10. So my question is, can I install the old 10.04 beautiful interface to run on the 10.10 edition? Re-installation is a MS solution, that turned me on to linux in the first place!
View 9 Replies View RelatedRed Hat :: Booting Successful But Failed To Display User Interface
Jul 16, 2010Ii successfully installed RHEL 5 on my HP pavilion tx200 (tablet) I reboot the system and the booting was successful but failed to display the interface that will allow me to supply my user account, I installed it using custom layout and default layout but the result was the same.
View 2 Replies View RelatedGeneral :: Unable To Use GUI Interface Meant Graphics Interface?
Apr 11, 2011i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
Ubuntu :: Clock Display Changing From UTC To CDT And Back?
Apr 6, 2011In the clock display (Kubuntu 10.10 32-bit defaults at the lower right in the task bar) I have been having a problem. When I right click on the clock (is there a name for right-clicking when referring to both right and left handed people?) or sometimes when I just run my mouse over the clock, it changes from CDT to UTC. Doing it again reverses that. I'm speaking about the actual clock on the task bar, not the pop-up panel (tool tip?) that comes up when you roll your mouse over it.
I have both time zones selected so that I can see them in the pop-up info panel when I run the mouse over the clock for a second. But, normally, I just want the CST/CDT displayed always, in the task bar.
I've looked at all the options I could find and haven't found what I missed. It started up recently, so it was probably some setting I changed, but now can't find.
A minor problem, but annoying. Anyone? If the answer is already out there, link me up!
Software :: Display Output Does NOT Switch Back?
Jan 24, 2010I have a Dell Latitude D610, and am running a 2.6.21.7 kernel. If I close the screen on the laptop, the display output switches to the external VGA output. When I open the screen, the display output does NOT switch back. This occurs when running X and when in command line mode. Is there any way to get the output to automatically switch back when I open the screen?
View 2 Replies View RelatedFedora Installation :: Can't Seem To Figure Out A Fix To Get Display Back To Normal?
Mar 15, 2009i'm just installed VirtualBox following this guide:[URL]...then i created a WinXP VM. installed GuestAdditions and everything seems to be fine, display was fine 32bit 800x600. Anyhow after rebooting, the VM only display 8bit and 640x480 for XP... this is really weird. anyone come across this before? i can't seem to figure out a fix to get my display back to normal
View 2 Replies View RelatedFedora :: Back To Nouveau Driver - Display On Projector?
Nov 12, 2010Fedora 13, x86_64, up to date. Trying to get nVidia Quadro NVS 140M to display on a projector the same as it does on the laptop screen, which is 1680 x 1050. I failed to do so with the nVidia driver (latest version), so I want to go back to the nouveau driver and try with xrandr. I have always used the nouveau driver with Fedora without an issue, but in my former life in Ubuntu I sometimes switched back and forth between the "nv" driver and the nVidia driver.
Doing so was trivially easy - just edit xorg.conf replacing "nv" with "nvidia" or vice-versa, then restart X. However, after installing the nVidia driver via Yumex and using the nVidia config utility, I find that now I have an xorg.conf file that is loaded with stuff I don't understand, except that at the top it says it was created by nVidia, and there are two places where it says the driver is "nvidia." I have searched and all I can find is instructions for installing the nVidia driver.
Apparently that is meant to be a one-way ticket, because I can't find any instructions for how to return to the nouveau driver. Except stuff that is over a year old, and complaints from users whose systems failed to start X. What would happen if I just replace "nvidia" with "nouveau" in the xorg.conf file and restart X? I know if it won't start X I can boot to rescue mode and re-edit xorg.conf, but I'd rather ask first and do it the right way than have to repair a broken system.
Ubuntu :: Messed Up With Display Configs, Can't Change Them Back! ](*,)?
Oct 4, 2010I recently tried to plug my laptop to a TV and adjusted the settings consequently. The thing is now that I want to use it with the laptop screen. I can barely see the first top inch... I'm pretty shure it has something to do with the display configuration since it works flawlessly when I log in as a guestIs there a way for me to reset the screen to it default config without using my regular session?
View 3 Replies View RelatedFedora :: Can't Login To F14 / Display Goes Black And Redirected Back To The Log In Screen?
Nov 3, 2010So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.
After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.
Fedora :: Display Doesn't Turn Back On After Extended Idle
Apr 16, 2011I have XFX ATI-HD5670 and use proprietary catalyst 11.2-1 in 64-bit Fedora 14.
I am not sure when this started, or if it ever did work before, but when I started noticing that the screensaver will not turn off the monitor, I set the gnome power manager to make the monitor sleep after an hour.
Now, the display will not turn back on after it has been in sleep mode. I know the system is still running fine as I can ssh from another PC and see that everything seems to be normal, no error message in dmesg, /var/log/Xorg.0.log, etc.
/var/log/Xorg.0.log shows that monitor DPMS is not detected but still enables DPMS:
Is this a problem with catalyst driver? I know it's not the PC or the monitor, because I have a 2nd PC with the same video driver with the same problem, but others without this driver don't (ati open source, nvidia, etc. all work fine.)
I'm wondering if the problem always existed before, but I just didn't notice it because the display sleep mode was never set? If that's the case, my hunch is that it looked like it worked because the monitor was smart enough to turn itself off when the screensaver kicked in and just showed a blank screen, and the video driver was never involved with sleep mode until I set it in gnome power manager, at which point it started showing this problem of not waking up? And because the screensaver was no longer set to blank the screen, but to show some animation, that's why the monitor will never sleep anymore?
Ubuntu :: Change Gnome Display Setting / Back To My Normal?
Jan 12, 2010I was using GDE in my ubuntu system. But yesterday i did some thing so my ubuntu system has changed as debian. My login screen changed and i cant access "system->administration->Login window"
when i do this i am getting this error message
"GDM (GNOME Display Manager) is not running.
You might be using a different display manager, such as KDM (KDE Display Manager), CDE login (dtlogin), or xdm. If you wish to use this feature, then your system will need to be configured to use GDM instead."
How to come back to my normal original ubuntu with GNOME.