General :: How To Conect To Intrenet Ubuntu 6.06 Version Via Ethernet Cable
Apr 28, 2011I want to know how to conect to intrenet ubuntu 6.06 version via ethernet cable and wireless through modem THOMSON99BC4C on asus notebook.
View 3 Replies
ADVERTISEMENT
Ubuntu / Apple :: EMac And IMac File Sharing With Ethernet Cable And Other Cable?
Oct 12, 2010how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
General :: Net Boot From Debian Server Using Directly Connected Ethernet Cable
Jun 23, 2011I have a computer with grub installed, and nothing else. I'd like to install Debian on it without having to burn a CD. (and I don't have any flash disks.) It has a nice ethernet card, and I have another computer right next to it with an ethernet card. I also have an ethernet cable. However, I don't have any router free which I can mess with for these purposes. As I've looked up, apparently modern Ethernet cards don't need crossover cables, normal cables will work for this type of connection.
I've tried several different "tutorials" on how to set up a netboot server, but
None of them are complete. All of them assume that you understand how DHCP works, and that you can do things like set up a dnsmasq server. I don't understand the DHCP protocol, with submasks and whatnot (I know that it is the protocol for assigning computer network addresses, and that's it), and I don't think I should have to in order to simply connect two computers. All of the tutorials give you incomplete configuration files, and ask you to fill in things which I don't understand, and for me it doesn't make sense to customize these settings, as I just want to connect them and I really don't care what ip address the TFTP server has or whatnot. All of these assume that you are going through a router. I am not. When I try googling for ways to directly connect two linux computers with an ethernet cable, I can't even find instructions, just more references to "you need crossover cables".
So basically, I have two computers directly connected by ethernet cables. Tell me what packages I need to install, what the contents of my configuration files should look like, and what, if any, commands I need to run in order that when I turn on my second computer, and select network boot, it will start up a minimal debian system.
EDIT: Hmmm, it looks like I actually have a linux kernel installed too, but no root filesystem (so no other programs besides busybox).
General :: Unable To Reach The Internet - Light On Mobo Where The Ethernet Cable Is Plugged In Is Steady Yellow
Aug 2, 2011I used my computer this morning, but when I returned this evening, I am unable to reach the internet. Also the light on the mobo where the ethernet cable is plugged in is steady yellow.
My limited experience would tell me it is a hardware failure, but it seems so strange with nothing happening during the day. How might I best diagnose the problem?
Ubuntu :: Can't Get It To Ethernet Cable
Jun 1, 2011I just purchased an HP Pavilion p6710f desktop with an ralink wireless n card, and 11.04 won't recognize it in 'Additional Drivers'. I can't get it to an ethernet cable, and then check for more additional drivers (did this on an old laptop), so what can I do??
View 4 Replies View RelatedUbuntu :: No Ethernet Cable - Means Frozen ?
May 24, 2011I installed Ubuntu 11.04 on my girlfriends laptop a couple days ago...had the Ethernet cable plugged in to do the install...loaded fine the first time after the install. Unplugged the Ethernet cable when I had the wireless network set up and it froze. Restarted and it wouldn't even load the desktop. Didn't make the connection at first...thought there was something wrong with Unity. After about a day and a half worth of searching Unity problems/desktop freezing and solutions, I stumbled across this:
Quote:
Do you have a Broadcom card? You have probably noticed the desktop works when you run Ethernet but it locks up when your wireless connection is active.
You'll need to upgrade the kernel to fix the issue. 2.6.39.0 did it for me.
11.04 just runs fine now.
This solution was to update the kernel, but that didn't work for me. Now I'm stuck.
Ubuntu :: Not Getting Network Connectivity Via Ethernet Cable?
Jul 14, 2011I've just installed Ubuntu Desktop and connected the ethernet cable, but I don't have network connectivity. Why?
View 7 Replies View RelatedUbuntu :: 9.10 - No Internet Connection Via Ethernet Cable
Mar 9, 2010I just built my first pc, installed ubuntu 9.10 and tried connecting to the net through my ethernet cable and all that happens is it says cannot find server. Do I need to install network settings & if so what & where,or should it automatically detect them? As this is my first build I am a novice but am willing to listen & learn.
View 3 Replies View RelatedUbuntu Networking :: No Connection With 75ft Ethernet Cable?
Sep 21, 2010I am trying to run a cable from my wireless router over a 75ft cat6 cable to my bedroom. I don't get any connection on my end and I don't have any other ideas. I did setup a m0n0wall box just to try. I got the network led on my server to light up in my room but nothing more than that. Lastly, I tried adding a 5 port switch in my room and then connecting that to my server and nada.
View 4 Replies View RelatedUbuntu Networking :: 10.4 - Connect To The Internet Via An Ethernet Cable
Jul 13, 2011I am using Ubuntu Server version 10.4, and am trying to connect to the internet via an ethernet cable. This may and probably is incredibly simple, however, I could not find anything that pertains to it.
View 9 Replies View RelatedUbuntu :: Ethernet Card Not Working On Connecting LAN Cable
Jun 29, 2010I have installed ubuntu 10.6.4 in my dell inspiron laptop but my ethernet card is not working when I connect my lan cable to it. But it is working well in windows vista. How to load drivers for it.
View 3 Replies View RelatedUbuntu :: When Ethernet Cable Is Plugged In / It Doesnt Work
Jan 27, 2011When the ethernet cable is plugged in, it doesnt work. I have to unplug the cable, refresh the page and let it wait for the connection, after a second or two, i plug it back in, and it works. this works only for that page, which means only that page loads.. if i try to open another site or smthing else, it doesnt work and i have to repeat the exercise for the new site..i have to unplug, refresh and let it wait for connection and plug it back in.. The same thing happens if i try to download an application.. i have to first issue the command to download, and when it says "connecting to blah blah.." i plug the cable back in and it starts downloading, it doesnt work if the cable is already plugged it..!
View 9 Replies View RelatedCentOS 5 Hardware :: Connect Pc To Pc With Ethernet Cable?
Jan 6, 2011i have two PC (one laptop and other desktop) how to connect both with lan cable?
View 1 Replies View RelatedUbuntu Networking :: Ethernet Cable Modem Can't Connect To Internet
May 4, 2011I am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
OpenSUSE Network :: Internet By WiFi While Using Ethernet Cable ?
Jul 27, 2010My WiFi can connect to internet without any problem, until I plug my ethernet cable ...then I lose internet.
So the question is : how do I configure my ip/dns and stuff to still have internet when I'm plugged by cable at the same time! it was working on windows ;-)
Networking :: File Transfer Using Ethernet Cross Over Cable?
Apr 18, 2010I am running Ubuntu Linux 9.10 on my laptop and desktop. I would like to transfer files from one to the other using an Ethernet Cross Over Cable. Is there software already installed in the bundle, that would allow me to setup network drives for each machine when the cable is connected. Also how would I setup the configuration.
View 10 Replies View RelatedNetworking :: Find A MAC Of Hardware Attached Via Ethernet Cable?
Apr 19, 2011How can I find a MAC of hardware attached via ethernet cable? I have been working nicely with an industrial scanner that is controlled by a Linux PC via an ethernet cable, but the hard drive has died I need to get it working again. The problem is that the main PCB has a Realtek RTL8019AS ethernet controller chip: [URL] which I believe is used in the most basic way possible, applied straight off-the-shelf and unconfigured. To utilise the chip ARP commands are used to assign an IP address to the chips MAC address e.g. something like:
arp -s 192.168.2.5 00-05-a4-00-a8-f8
Unfortunately the actual MAC address was lost along with the HD Th only thing I could have a reasonable guess at is that the chip will have a default subnet of 255.255.0.0 or 255.255.255.0
Networking :: Shared Connection With Playstation 3 - Put Ethernet Cable Between Them
May 2, 2011How do I make share internet connection with playstation 3 with Linux Mint? I have put ethernet cable between them.
View 1 Replies View RelatedProgramming :: Write A Program In C To Detect The Ethernet Cable?
Mar 11, 2009write a C program to detect whether the Ethernet cable is plugged or unplugged. I found out by using a command "nm-tool" in Linux terminal will show me whether a Ethernet cable is plugged or not. If Ethernet cable is plugged, in the device part of eth0, the Hardware Link of Wired Settings will indicate a "yes" and "no" if no Ethernet cable. Hence, in my previous code, I use one function called popen to read the state as shown below:
PHP Code:
[code]....
However, now my project wish to not use the NetworkManager (where the "nm-tool" command comes from). And this gives me trouble to detect the Ethernet cable. So is there any other method for me to detect the Ethernet cable in C programming?
Networking :: Ethernet Cable And Wireless Network Won't Work In Ubuntu 9.10 / Sort It?
Feb 20, 2010I'm a new user of Ubuntu, so i'm not that familiar with this OS. My wireless network is detected but when I'm entering my 128 bits WEP key, it doesn't connect at all. I have no clue where to start troubleshooting.
Here's some of my specs if that's of any help:
Computer is a Sony Vaio laptop model VGN-SZ370P
My wireless card is from Intel Corporation 82801G (ICH7 Family) USB UHCI Controller
The ethernet cable connection used to work before, but I fooled around with some commands and now seems to be disabled...
Ubuntu Networking :: Ethernet Connection Does Not Come Back If Cable Had Been Manually Disconnected
Jan 28, 2011OS: Maverick Ethernet driver: tested with sky2 an sk98lin This has been driving me crazy for the last few months: if I unplug ethernet cable while my laptop is on reconnecting it sometimes does not bring the connection back.
And once ethernet is gone nothing that I try seems to consistently bring it back. Rebooting, disabling/enabling the driver, disabling/enabling NIC in BIOS, changing driver from sky2 to sk98lin, deleting connection from Network Manager, resetting the router - nothing helps. It seems to come back randomly a few weeks later. Once I used live Ubuntu on a USB stick and ethernet came back not only on a live distro but then when I rebooted also on my main OS. But when I tried that trick next time ethernet was missing in the live distro as well.
Also once I was able to revive ethernet but compiling sk98lin driver, blacklisting sky2 and rebooting. Of course next time doing the same routine did not help. The thing is - ethernet works fine with either sky2 or sk98lin and I can unplug the cable and plug it back in most of the time without any issues. But then every so often - bang and I'm stuck with only wireless until ethernet suddenly starts working again.
Debian Installation :: Network Autoconfig Failed Even With Ethernet Cable
Jan 1, 2015Router works fine, debian refuses to work with it. I continued the install anyway but only have the first DVD so now I've got a useless base install that can't connect to the internet.
The fact that this installer has utterly failed where the others succeeded had drastically reduced my confidence in the debian team.
Debian Configuration :: Wireless Only Works When Ethernet Cable Is Plugged In?
Jul 9, 2011I have a debian-powered NAS (Buffalo LinkStation) and I want to configure the following behaviour: When ethernet (eth0) is plugged in, connect and get a static ip address (ie. 192.168.0.11) When a wireless usb-adapter (wlan0) is plugged in, connect to a wireless router (ie. "Ankkanet") get another static ip address (192.168.0.12)
My /etc/network/interfaces :
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
[code]....
what could be causing wireless to disconnect when ethernet cable is unplugged?
Debian Hardware :: Finding Plugin Names Of The Ethernet Cable?
Mar 2, 2010if i would know the terms i could search for it, so bare with my words: i got an old PC, and my ethernet-cables don't fit into its plug (port?). its a little smaller than the usual one. how is it called and what am i looking for (whats the name of the plugs which need to fit, whats the measure. all i could see is male/male and some voodoo stuff like RJ333 <-wrong.
View 6 Replies View RelatedFedora Networking :: Finding Out If Cable Removed From Ethernet Connector
Feb 2, 2009How can I find out programmatically if a cable has been removed from an ethernet connector where the interface is "up" ??? Without using ping of course.
Sidebar question, if I have two interfaces on the subnet how can I force a ping out a specific interface? Say, I have 192.168.5.14 and 192.168.5.13 and I want to throw a ping out *.13 and not *.14 ..
Ubuntu Networking :: Auto Eht0 Doesn't Work - Can't Connect With Ethernet Cable?
Nov 13, 2010I've recently bought a recycled computer for my office. The plan was to get an old cheap computer and use it to write LaTex documents but nothing else. However, I can't seem to get the thing to connect to the internet. I'm on a University network which has a funny setup but I don't think that's the problem.So here's the deal. I have tried this with 9.04, 10.04 and 10.10 and it hasn't worked. The computer recognizes the ethernet cable. If I issue the command "sudo mii-tool eth0" and get back "eth0: negotiated 100baseTx-FD, link ok". However, click on the networking logo on the top right, and click auto eth0, it tries to connect for about 30 seconds, then gives up. Unfortunately I'm pretty clueless when it comes to networking so I have no idea what to do to try to fix this.
View 8 Replies View RelatedFedora Installation :: Install The Broadcom STA Drivers From The Live CD Without Using An Ethernet Cable?
Aug 3, 2011Since there is no "Additional Drivers" app in Fedora like there is in Ubuntu, how the heck can I install the Broadcom STA drivers from the Live CD without using an Ethernet cable? And how the heck can I ensure that they stay installed, even after installing Fedora? I suppose putting the RPM on a USB Flash Drive will work, but that's the only thing I can think of... And is there an RPM out there for this specific driver?
View 8 Replies View RelatedServer :: Localhost Has Stopped Working / With Or Without Internet Connection Via An Ethernet Cable?
Apr 2, 2010I have been using my laptop as a development machine for a few months now, developing php/mysql applications, and testing them offline via the same laptop by pointing the browser to url.
But a few days ago, my url stopped working and I discovered that it will now only work if I have an active internet connection plugged in. Why has this happened and how to I fix my test server so localhost works with or without an internet connection via an ethernet cable.
Ubuntu Networking :: Wireless Driver Became De-activated After Plugging In Ethernet Cable For File Sharing
Dec 10, 2010Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.
Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.
How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?
Ubuntu Networking :: Laptop Locks Hard On Login Screen If No Ethernet Cable Plugged In
Jul 15, 2011Acer 5250-BZ475 laptop, fresh install of Ubuntu 11.04. Boots up beautifully as long as an ethernet cable is plugged in. Otherwise, I get to the login screen and have just enough time to start typing in my password before the entire system hangs hard - no mouse, no keyboard, can't even get to a terminal, nothing. Have to hard power off the machine.
It seems to be a problem with the wireless card trying to initialize, but there doesn't seem to be a bios option to disable wireless on this laptop, so I'm a bit at a loss as to how to fix this problem. By the way, wireless works fine if I boot up with a cable connected - I can see all the wireless access points in my area no problem. I just can't boot without a wired connection, which makes my laptop more or less useless when I'm away from home with it.