General :: How To Check The Health Of A Hard Drive
Aug 2, 2010
My SATA drive started clicking and I was unable to access the data. It was not clicking loudly though, like a drive that has already gone bad. After tightening the connections to the hard drive, it stopped clicking and I was able to access the data again. I have started to move files off of the drive, but I think this drive might still be in good health. I didn't find any data corruption and I haven't had any trouble accessing any files. I have never had an SATA drive fail before so I'm thinking that it could have just been the loose connections that was causing the problem. What tests can I run on this drive to find out how healthy it is?
This is the hard drive in question: HITACHI Deskstar T7K250 HDT722525DLA380 (0A31636) 250GB 7200 RPM 8MB Cache SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive
View 7 Replies
ADVERTISEMENT
Jul 18, 2010
I need a script to check Server health checkup, includes: CPU utilization,process running,utilization taken by processes,free space...
View 2 Replies
View Related
Apr 5, 2010
i have created RAID on EDGE server but when i run this command to check RAID status #megacli -CfgDsply -aALL |less
its shows nothing so how can i come to know whether my RAID is degraded or online also in opsview (monitoring tool) i have enable mega raid its shows ok but DISK showing 0
View 1 Replies
View Related
Dec 3, 2010
I'm just curious - why do all linux distros (all I've seen) run their periodic disk checks during boot? I mean, I understand that a disk should be checked now and then, but why does the system do it during boot, when I'm waiting for it to load, instead of checking them during shutdown, when (most probably) user doesn't need the computer anymore.
View 5 Replies
View Related
Apr 20, 2010
i have edge server. raid(5) have been installed but not able to check raid health. using command line able to.but using monitoring tool opsview, showing error -NRPE: Unable to read outpumachine Arch- 64 bit centos -5.2
package installed -MegaCli-2.00.15-1.i386.rpm
View 2 Replies
View Related
Jun 6, 2010
How do I check the state and health of the laptop battery. In Ubuntu it was just a simple task of clicking on the battery icon on the task bar and your info would come up. With Fedora 13 nothing happens..
View 2 Replies
View Related
May 23, 2010
I have two computer systems at home (a laptop and a pc), one with ubuntu 9.10 and the other being windows 7. Since i recently discovered how awesome counter-strike:source runs on the latest edition of Wine, I no longer need Windows 7 on my system.
The question is, I have partitioned my laptop at least 5 times the last 6 months, and I want to find out if my hard drive could cope with repartitioning once more. Could you guys please give me the name of a tool for Windows to check the state of my hard drive?
View 3 Replies
View Related
Dec 20, 2010
how do i run fsck on my drives? all are ext2 power went out.
View 2 Replies
View Related
Sep 24, 2010
I have a laptop, running Windows Media Centre unfortunately, and I think the hard drive is hosed. I was wondering is there away of checking the hard drive for errors using the ubuntu livecd? I would put ubuntu straight onto it only there are various items within Windows that the owner needs to get.
View 2 Replies
View Related
Jan 17, 2010
I was unable to boot my computer because bad blocks in my drive 'appeared' over my current and most used partition, for 9.10. I discovered there were 101 bad blocks on the drive, so I called western digital and had them send me a new one. In the meantime, running fsck on the drive managed to sort out the bad blocks for the time being. The replacement drive arrived on Friday, and since then, I've been trying to clone my current drive to the replacement. Using Clonezilla, I kept getting the error "bad partition table on /dev/sdb". Alright, I tried a bit-by-bit transfer using dd, but for some reason, the transfer fails on the last partition, leaving the replacement drive unbootable. What do you think I should do? Does it sound likethet sent me another faulty drive, or am I just doing something stupid? I've copied my drive before, but ive never had these problems- i just popped in Clonezilla and away it went.
I'm really leary about this drive, I have many important files for school and TONS of music. The school files, I can back up, and the music could be shuffled to another external drive, but I reallydo no want to go through all of the time and effort to move it to a new drive that may already be failing. Does anyone know what I should do? Is there some way to test the 'health' of the drive before I spend hours rebuilding my filesystem?
View 3 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Sep 30, 2010
now I'm done full transition from windows 100%.i want ask how can i check my memory stick and External Hard Drive from virus ?
View 9 Replies
View Related
Jul 19, 2010
I'm trying to partition/format a new external hard disk for backup and have run into a snag that now prevents my computer from booting. In the description below of what happened please bear with me as I do my best to remember the commands and screen output (which for obvious reasons I don't have in front of me).As root.The disk was subsequently writable. However, I then realized that the default start and end cylinders had resulted in a very small partition apparently occupying some free cyclinders in the beginning of the disk.
So next I ran fdisk again, deleting the sdc4 I had just created and creating a new one instead, this time using the cylinders at the end of the disk. When I exited fdisk I got a message something like that the new tables can only be read upon a subsequent reboot. I ran mkfs again, but not e2label. Indeed using /sbin/fdisk -l, sdc4 still had the small size as defined initially. So I rebooted.
Now when it comes up I get something like "checking filesystems. fchk.ext3: can't resolve 'LABEL=/media/LaCie2TB1'" and am prompted to login as root to correct. I tried to simply delete sdc4 again but that didn't help. I also tried to edit /etc/fstab (using vi, which I don't know at all) but it kept telling me that this is a read only file, even though permissions are rw for root.Can anyone out there help me so that (1) I can boot into my computer, and (2) I can correctly partition and format the hard drive??
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Feb 12, 2011
I wonder if there is any tool that can read health of my HDD's? There are tons in windows but what options are there in Linux? I would really hope there is a tool a can install without using terminal cause I dont have web access for the Xubuntu right now. If anyone aware of such a tool, preferable a .deb file so I can easily install without hazzle. Also I hope tools like that are not littered with tons of dependencies. Cause those dependencies are a major challenge without online connection. If there exist any smart terminal commands that will let med check health status pls let me know and pls write down the command. I have enabled the s.m.a.r.t in BIOS.
I have 4 drives running Raid 0 if that matters.
View 9 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Feb 23, 2010
I'm renting a dedicated server with a company that claims that the server has 2 hard drives in a software RAID 1 array, but I need to make sure that the server really has the 2 HDD, and the size of the 2nd drive... how to do that ?? system is Centos 5.3
View 1 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Mar 23, 2010
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies
View Related
Mar 6, 2010
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Aug 6, 2010
Is there a way to disable disk checks in a mounted usb drive? I have a 500GB usb mounted drive in my CentOS machine and everytime I reboot my system, it does disk checks which is a long painstaking process.
/mnt/sdb1
View 4 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Mar 8, 2011
Is Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
Jul 9, 2010
I just installed a Sata WD 500GB hard drive, shows up in BIOS as secondary master drive, but do not see it after boot. What gives?
tone@homeserver:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 9.2G 3.3G 5.5G 38% /
tmpfs 881M 0 881M 0% /lib/init/rw
udev 10M 740K 9.3M 8% /dev
tmpfs 881M 0 881M 0% /dev/shm
/dev/hda2 65G 197M 61G 1% /srv
View 4 Replies
View Related
Sep 10, 2010
I have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
View 1 Replies
View Related
Dec 16, 2010
I want to securely backup my 80G HD, but doing a complete backup takesforever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive.% After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work.
% The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does thisIn reality, I want to do this for multiple machines drives each, but think that solving the above will solve the general
View 4 Replies
View Related
Nov 4, 2010
if I try to install a linux distro on an external hard drive, while I have windows XP on my primary, will the Linux stlil install a Grub on the Windows MBR. Or have I got that wrong.
View 2 Replies
View Related
