I'm trying to install Xubuntu, but I don't have an empty CD and my computer boots only from HDD and CD. I've extracted ISO's contents into my HDD root and have installed a (non-working) Linux and GRUB. So I've tried this boot entry:
root (hd1,msdos1)
linux /casper/vmlinuz
initrd /casper/initrd.lz
boot
But it boots same as the non-working Linux install
I'm trying to get a multi-boot setup going for a USB.
I have different vfat-32 partitions I have copied ISOs of several linux distros.
The first one I installed using unetbootin, which works great and uses syslinux, but syslinux can't boot other partitions. So, I have grub installed.
I have gotten so far as to be able to get the grub menu up, but trying to load the partition's isolinux (which is how the Linux Mint LDXE distro boots) gives me an grub error 13.
Here is my menu.1st:
Code:
default0
gfxmenu=/boot/gfxmenu/linuxmint.message
timeout5
[Code]....
I was wondering if there is a version of isolinux or a simular boot loader for Linux, that boots the kernel from an encrypted boot partition? If not, are there any roadblocks that would prevent adding encryption to isolinux?
View 2 Replies View RelatedI downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies View Relatedbuilding an install cd or dvd media that will automatically install the Linux software on a client pc. There is no network connectivity so the client can only be loaded with Linux from CD or DVD media. The crux of the matter is that I can not automatically install the Linux software on client WITHOUT typing linux ks=cdrom:/ks.cfg at the boot prompt.
I want to avoid any user prompts and just have the software install with the RPMS that I need for this client pc at the boot prompt. Actually, when the boot prompt commences, I would like the software install to start with no user intervention. I've tried several different methods in isolinux.cfg, but the OS always wants boot prompt for the cdrom. Can the boot prompt information be read automatically from the isolinux.cfg with out user intervention? I'm looking for the same behavior as a LIVE CD that kicks off with no boot prompts after a few seconds. Here's a copy of my isolinux.cfg
default linux
prompt 1
timeout 600
display boot.msg
F1 boot.msg
F2 options.msg
F3 general.msg
F4 param.msg
[Code]....
I am having trouble booting off a cdrom using isolinux. I see the isolinux prompt and it seems to boot but I run into:
RAMDISK: incomplete write (-28 != 32768 ) 131072000
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2)
I can't seem to get much debug information either other than the two lines. What do you think I have a problem with?
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedProblem: I have installed two Ubuntu servers, 10.04 32-bit and 10.10 64-bit, in a multi-boot environment (also have FDOS and WinXPsp3). The 64-bit will not boot because grub can't find the UUID for the disk with the 64-bit system.
Brief Background: Installed 10.04 LTS two months ago with no problems. 10.04 is in a primary partition on hda with FDOS.
Installed 10.10 (64-bit) in a new primary partition on the same hd. The install seemed to go ok, but the MBR and the fs on the 10.04 were corrupted; could not boot. Restored drive, and rebuilt grub.
Installed 10.10 on separate hd (hdb). In grub step all OS's were recognized so I pointed the grub to hda. Grub failed to boot.
Rebuilt grub from 10.04 on hda. All systems recognized but 10.10 will not boot because it says it cannot locate the UUID specified.
Compared the grub.cfg for both systems, the UUID specified for hdb is the same. Also, when I mount the drive for 10.10 on the 10.04 system the drive UUID is consistent.
I know I must be missing some thing, but I know not what. Have searched and can't find any clues. All other OS's boot ok.
Hardware: AMD64 4GB, 2 internal IDE drives (hda and hdb), 1 internal SATA (hdc WinXP), various USB and Firewire Drives (no bootable systems).
I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
i installed slackware then i unistalled it and installed debian then i decided to go back to slackware but it wont boot because i have the grub boot loder how do i fix this
View 2 Replies View Relatedi am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
Our NAS drive just packed in so I thought I'd quickly build up a ubuntu server. Got two 500gb sata drives in raid mirror trying to install the latest iso of ubuntu server, but it all loads up to the point where you choose what to install, and pretty much whatever you select returns, booting from local disk, isolinux: disk error 40.....hit any key to retry, which of course restarts the system and the horrible sequence starts again
I've just rewritten the disk and its still playing silly buggers
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
1. While installing Fedora 12 i got this error "Isolinux disk error 20; AX=4280, drive EF". I run Ubuntu 9.10 on same system but now getting Error on installing Fedora 12 using a writeable CD to install that. A friend of mine install fedora from the same CD. I am using Pentium 4 2.40 GHz, 512MB Ram, Nvidia G-Force MX-440 SE. and a complete Partition of approx 10GB.In frist attempt CD was not able to boot, but after 3-4 trys CD was booted for couple of times and now it was not booting again. In that 2 trys, i got the same error as mentioned above.2. Before installing this I install ubuntu and it was running fine, but a little problem with that. Whenever I boot my system all things remain same but monitor settings went on 800*640. I usually set them to 1024*768 (Maximum my card can suppot).
View 2 Replies View RelatedI just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedWhat is the generic way to create a boot CD for any given Linux distro using grub ? Can anyone give me the exact commands for creating the proper ISO image. From there I know how to burn the ISO image to CD.
View 5 Replies View RelatedI have a home-brewed Linux system that I've installed on a USB key. I'm plugging this into a laptop. I can tell from what is going on that it has successfully loaded the kernel and is running the shell script that is specified on the "kernel"he GRUB configuration.But... although I can get output from printk() calls in the kernel just fine, I get nothing from "echo" commands (or any other commands) in the initialization shell script. I can see that the commands are being run,t the output is just disappearing into the void.This is problematic because there are other problems, but I can't get debug output to track those down...Given that printk() output goes to the laptop screen as expected, it seems that GRUB must be sending other output to something other than the console, yet the grub.conf configuration is quite simple:
default=0
timeout=0
title Test
[code]...
I have dual boot system - Win7pro, Ubuntu 11.04, installed Win7 1st.I need to boot from CD, but can't get past GRUB... ?
View 2 Replies View RelatedI know this isn't linux related but it is grub related.
I made my own small "32-bit protected mode" Operating System in Assembly.
The OS works great in qemu however I wanted to test it using real hardware.
I have a seperate HDD with grub installed into /boot/grub
In this folder I have:
Code:
Menu.lst:
Code:
The kernel is only 512 bytes. How can it be to big?!?
The only problem I am having it is says:
Code:
Kernel to big
And the kernel's format is "bin" if that makes any difference.
On boot I'm getting
GRUB error 17
on a Windows vista dual boot with mandriva 2010, and I'm using a mandriva LiveCD.
fdisk -l
I see other posts asking for output of grub files in /etc/ none found on my kit, closest I see is
other posts reference this block of cmds to which I need to perserve my dual boot so uncertain how to proceed
How do I make sense of output of fdisk shown above to issue above block of cmds ? Am familiar with unix as a software developer, not sysadmin
I am inexperienced in using Linux, and just installed Ubuntu 10.10 on an external hard drive. I didn't want to mess around with re-partitioning my hard drive, which has Windows 7. I figured that I could just run Ubuntu from the external, and if it gave me any problems with Windows, which I unfortunately need for work, I could just unplug it and boot normally. However, GRUB appears to have installed some component to the local hard drive. Whenever I try to boot from the local hard drive, I get this error message:
"error: no such device: 8b84f351-7770-4908-b12f-0cbd31bc3662
grub rescue> "
Another thing is that in the boot menu, only the CD/DVD drive and local hard drive are options, it won't even register the external.
Any suggestions on what may have caused this error? I saw from other posts that GRUB doesn't like multi-drive systems. Also, would it be possible to delete GRUB from my system, then allowing Window's MBR to take over?
I have yet to find any coherent instructions anywhere on earth on this and I am wondering if its ever actually been done before. Assuming I have root partitions on /dev/hda1, /dev/hda2, /dev/hda7. How would I do it? What would I type in the terminal?
View 9 Replies View Relatedchange the boot menu - GRUB
I regularly update my ubuntu (10.04), and new minor versions keep accumulating on the GRUB screen. Right now I have 5 different versions listed on the GRUB, even though I always select the latest version to work with.
Am I supposed to do anything to get rid of the old version references? Do these old versions affect disk space/performance?
I used Windows to reformat my Ubuntu partition and now I can't boot anything. What's the best way to recover my netbook? I'm only able to use a 256 MB flash drive.
View 1 Replies View RelatedI just installed Ubuntu 10.04 onto my toshiba C655 iCeleron 900 2.20ghz 1GB RAM. I have win7 and I have a 4GB swap partition. How Do I change the Boot order in Grub? I saw instructions somewhere else to type sudo, etc in the command line and was getting access denies...
View 5 Replies View RelatedSlackware is my main desktop, however, I decided to give Fedora 15 a try and overwrote the MBR installing it with grub. Now I want to keep fedora and its grub, just I can't get slackware to boot.Fdisk:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
[code]....
I'm trying to install MS Windows from my Linux box. Because I have no CD drives nor USB ports, I can't use any live media to boot the computer and install Windows from the installation disk. So I've created a FAT partition and copy DOS files on that, so that I can boot this partition and install Windows from there. But the problem is I still haven't able to get it to boot.
Here's the output of fdisk -l code...
I created the partition by using cfdisk to format it as type 0B: WIN95 FAT32, and made dos filesystem on it using:
Code:
mkfs.msdos /dev/hda1
But when I reboot and select the DOS entry in GRUB, it tells me that:
"This is not a bootable disk. Please insert a bootable floppy and press any key to try again."
what I'm missing or doing wrong here? Do I need to change something on the MBR of hda1 etc...
Today I was forced to reformat windoze and of course lost grub so I can't boot ubuntu 9.10. I found two suggestions in previous posts which didn't work. One suggested using the install disk as a rescue disk and as root run grub. I entered sudo grub and the cmd was accepted but the cmnd grub was not found.
The second was to sudo grub -install and again grub was not found. Both these suggestions were for a win 98/mandrake installation.
Do I have to reinstall ubuntu? If so there is a problem in partitioning. Setup sees there is already an ubuntu os on the disk. In fact two of them. I forget why, but I reinstalled ubuntu and ended up with two in the grub menu. I was advised not to try to repair grub and didn't. Now I have two and it thinks I want to put the third one side by side, or erase and use the entire disk. There was a third choice but I forgot already exactly what it was and didn't like it anyway. If I erase and use the entire disk, won't I lose windoze? If I put them side by side I will then have three which which will waste disc space. The discs aren't that big being only about 10gb. I don't think I want to waste the space with a third ubuntu.