I was wondering how/if it was possible to edit the min. version number of a depen for a .deb package. For example lets say my package says it needs libc6 2.7.1 or higher but I want it to be 2.5.1 or higher instead. Can I make this change with out having to recompile the .deb package?
View 1 Replies
I only have basic experience recompiling a Linux kernel, and I have a question about adding dynamic modules.In case I want to add a brand new module, do I need to recompile the kernel to include a reference to that new module, or is simply compiling a kernel with generic support of dynamic modules all it takes to add whatever modules I need later on, without recompiling the kernel and rebooting the host?
View 2 Replies View RelatedI have gone through a good number of distros all the way back to Slackware but I'm struggling to get my brain moving in the right direction again. I am working to enable sendmail and, from what I've read, it appears that newer version of sendmail are installed with milter but I can't seem to locate this. I am running v11.4 so I'm wondering if this is just not the case? I don't have a problem reconfiguring/recompiling the sendmail conf files but would rather not if it's not required. For the record my ultimate goal is to have the spamassassin and clamav milter's installed and using the home server as our primary email.
View 7 Replies View RelatedI have used Linux off and on over the years and had to go back to windows because of a problem I could not solve. That is no longer true and I have been using Linux (Ubuntu) for the last year or so and I consider it superior to other OS'S and a BIG thanks to all who contribute to make it so great and free. My question is that on some versions of Ubuntu some hardware might work fine(or an package for that matter)and in the next version it might not work. Are new drivers required for every new version? Do all driver work for all versions of Linux using the same kernel?
View 1 Replies View RelatedI have recently acquired a VA Linux 1220 Server 2x P3 866MHz 1GB RAM 80GB HDD. It's Totally blank (incl no OS) and looking for any newbie information that I might need to know to get started, including the OS version. Basically, as I said i'm totally new to this, We have Hosting Servers at work that I have been playing around with some vi commands etc.. And would like to study/learn at home...
View 1 Replies View RelatedWhat is the kernel version required for installing NFS4 (RHEL) ??
View 1 Replies View RelatedMay i know how to do kernel recompiling.step by step explanation will help me. i am new to this.
View 1 Replies View RelatedI am trying to install a specific version of JRE which is required by a program called Glucofacts. this is a diabetes program which is used for recording blood sugar readings on a computer. would someone care to give me some advice on the below error?
larry@ubuntu:~$ sudo apt-get install jre 1.6.0_07
[sudo] password for larry:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I want to change my kernel to an older version my current kernel is (2.6.35-24 generic i686 GNU/Linux) I want kernel 2.6.21 or 2.6.31 how can I do it?
View 2 Replies View RelatedI am using squirrelmail version 1.4.3a-5. i need change password plugins for this version.
View 2 Replies View RelatedIn my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread:Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.
View 1 Replies View RelatedI installed a newer version of python in /usr/local/bin/python2.6. Now I want to use that python and only that one. When I type "Which python", I want to see /usr/local/bin/python2.6, NOT /usr/bin/python, which is old one (2.4). Also, I want to see the same even after I reboot. How do I do that?
View 2 Replies View Relatedim on ubuntu, and i was trying to change the settings under System->preference->network proxy
When i click apply system wide, it asks me for my root password wich i provide and then it asks me for this other password, with this message: Privileges are required to change gconf system values. What is this? is there a way around it?
hJust installed brand new Centos 5.6 and skype, according to centos wiki (http://wiki.centos.org/HowTos/Skype) Getting these errors: skype: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by skype)
[root@thinkpad opt]# rpm -q libstdc++ --provides
libstdc++ = 4.1.1-52.el5
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(CXXABI_1.3.1)(64bit)
[Code]...
I'm running CentOS 5 in a virtual machine, and the pound service no longer starts at system startup. So I have a few questions...
Is this an easy fix or do I need to recompile pound?
How do I recompile a program?(Would like to know regardless)
Any suggestions?
If I compile the kernel once fully and if I wan't to make a minor change how do I do that without having to go through the whole recomiliation? Commands like "rpmbuild -bb" and "make rpm" seem to recompile everything but it should just compile the changes I made.I'm using Fedora 12 with the latest stable kernel.
View 11 Replies View Relatedif i wanted to just download and install a module, how does centos have it where i don't have download the source and recompile the whole kernel withthe module enabled? i read about install kernel-devel but nothing much more on using it. for instance, if i wanted to download ext4 module and have the kernel use it?
View 1 Replies View Relatedi have recompiled kernel on my netbook (lenovo s10-3t).suspend works correctly but then i cannot wake up. i think i just missed some kernel options.what options must be set for suspend/wake up?
View 7 Replies View RelatedHow do I force recompilation of the kernel .deb packages. After a small change I make to the sources without having to clean the sources and recompile the whole kernel again?
Code: Select all$ fakeroot make -f debian/rules.gen setup_i386_none_686
$ fakeroot make -f debian/rules.gen binary-arch_i386_none_686 binary-indep
Calling the second command again does not recompile the modified code, just recreates the .deb packages.
If I use:
Code: Select all$ make -f debian/rules clean before the build command, then it will recompile everything which takes ages.
How can I force recompilation of the files/objects I changed (and dependencies)?
I use this guide: [URL] .... ('Building only a single kernel variant' section)
I just up-graded to the latest version of the stable 11.4 64bit kernel on my laptop and it appears that the repositories have not compiled the VirtualBox driver module for the current kernel ... When I make /vboxdrv setup the message is:
Recompiling VirtualBox vboxadd kernel module, NOT. It has been packaged
I think this means that the installed module will not recompile has it was packaged. My kernel version is the lattest :
2.6.37.6-0.5-1
And my VirtualBox was installed from the Virtualization repos (4.0.8.11-1) even made the Vendor change and all. The version Before the lattest (4.0.4-1.6) did not work either. With the same problem. It is very easy to install VirtualBox from the Sun site and every time there is a Kernel up-date one can always make /etc/vboxdrv setup.
I use CentOS 5.3 with kernel 2.6.18-128.1.6.el5 for Clonezilla. It would be simpler for me if any of IDE or SATA drives detects as /dev/sdX device. Because when I cloning computers with Clonezilla it is matter which type of drive connected to cloned computer. So I must firstly clone computers with IDE drives, after that with SATA drives. If all drives would detected as /dev/sda I would can clone all computers at once! Is there simple way to enable new libata library without recompiling kernel? Is there already compiled kernels with this feature?
View 7 Replies View RelatedI'm currently upgrading my clients' CentOS 5 installation to use httpd-2.2.14 as we need it for the server to past some of the Hardware checks used in the PCI [Payment Card Industry] security test. I was basically wondering if anyone had the standard CentOS 'configure options' for building httpd/Apache so I could copy them to ensure it is a straight replacement for my existing 2.2.3?
[Code]...
Which LXDE version of Linux has the newest version of Firefox and Open Office included?
I am looking for an iso file, and I am trying to run this off of a live CD for now. So I want a light version of Linux, probably LXDE, or if not, then probably XFCE. But I need a new version of Firefox and OpenOffice included.
Because, I tried burning the customizable NimbleX @ custom.nimblex.net . Pretty good, except it uses Firefox 2, and Open Office 2.3, which are outdated.
And I tried Mint XFCE, which might have been pretty good too, but it had some issue of blanking and requiring relogin after I opened hotmail frequently (user id: mint, password: blank).
The web browser and the word processing program are the most important and essential applications to me.
So are there any Linux versions in LXDE on LiveCD that include newer versions of Firefox (or at least another good browser) and Open Office (oo seems better than abi)? (Again, if no LXDE, perhaps XFCE?)
I just want to download a good version in an iso file, and burn it to a CD and get to work. Like I said the web browser and the word processing program are all important.
So really, what iso/LiveCD versions are the fastest for running on an older system, and yet have the newest browser and word processor included?
I want to use Remastersys Backup, but their webpage [url] says that it only works with Grub-legacy, not with Grub-2 (Grub-pc).
What I currently have is Grub-2, and the question is can I safely switch from that to legacy, i.e., with a simple synaptic remove and install?
The Remastersys package actually wants to install, also in synaptic, the dummy package "grub"; so should I allow it to take care of the switch, or do I do it myself as above?
Using Debian Squeeze only, no multi-booting.
I've read quite a few threads on how to change the GCC version to 4.3 from 4.4 but when i do it tries to tell me that it cannot even compile the gcc version check or something similar. Also the kernel-source is 196.x.x even though the latest driver is 256.x.x so will compiling it make a difference since it's using an older version of the kernel source, i've checked in sid and apparently it's using the same package which is surprising. The main reason why i'm going to try to upgrade from 196.x.x is because that release has frequently and does frequently stay in the higher gpu clock for no reason and also runs ~10-20*C hotter than 256 does and for me that's the difference between 65*C max and 85*C max which is a very noticeable difference.
View 1 Replies View RelatedHow do I change the OS version in my profile. I have gone from 8.04 to 9.04 (so far).
View 2 Replies View RelatedWhen I write a reply in the forum the information on the left says that I am using "Jaunty Jackalope". However, I am on Maverick development release.
Quote:
Join Date: Nov 2005
Beans: 239
Ubuntu Jaunty Jackalope (testing)
How can I change this information. Seems not to be in the profile.
I'm using Ubuntu 10.04 on my computer, I asked a couple months ago here if my PC would run it and it does well, but I believe that not as well as I want to, mainly because of my computer. Right now I have the following:
RAM: 433 MB
AMD Sempron, 1800 MHz 3000+
HD 120 Gb
So I believe that maybe if I change my Ubuntu version to, lets say, 9.10 it will work a little better, because right now the PC have a lot of lag and some other troubles when working with PDF and the GIMP, etc. and I think its mainly because of the low memory. So, what do you think? Should I change my PC to 9.10 or some other previous version of Ubuntu?
I have a 10.4 Remix on a 7" eeepc. It has to be the coolest desktop ever.
Just installed a 10.10 Beta on a PC, and wonder what I have to do in order to convert the stock desktop (Gnome?) into a "remix" type desktop with all those cool icons and menu organization.
The install of 10.10 Beta "just worked". Great!
I like many of its features. But i cant change the screen resolution from 800 x 600 and the monitor type is set to unknown... I tried googling to find a solution but i didnt succed.. Atlast i gave up and tried fedora.. fortunately fedora detected my monitor and i was able to change the resolution.. It is also another linux distribution but why not ubuntu...?
View 1 Replies View Related
