General :: Build Errors With Crosstool
Jun 15, 2011
I'm trying to install "crosstool" from [URL] in order to create an arm-linux-gcc toolchain for an ARM target. I'm using Slackware 9.0 as I'm using a program(Sim-panalyzer) which seems to install only on such old versions. The installation proceeds fine for about 30 mins until i get an error like
Code:
a - elf/dl-profstub.os
a - elf/dl-libc.os
a - elf/dl-sym.os
a - elf/dl-tsd.os
[Code].....
I tried Linux Mint and I was able to install flex and bison but after some stage of the crosstool installation I got an error like
"these packages are either missing or too old: as ld"
View 1 Replies
ADVERTISEMENT
Apr 7, 2010
I have a working build of crosstool - it was built for gcc 3.4.3 using glibc 2.3.5 going from 32-bit x86 linux to 64-bit alpha linux. As far as I can tell -- it compiles correctly (output of alpha emulation matches expected) but it has a major flaw. When I use the cross compiler and attempt to add detailed debug information, it compiles, but does not have the debug information. For example, when I execute:
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -g -o hello main.c
OR
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -gstabs -o hello main.c
I get a working alpha binary for hello world. BUT - when I run objdump - this is what I get
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump -g hello
hello: file format elf64-alpha
/home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump: hello: no recognized debugging information
Frustratingly - if I use my x86 gcc version 3.4.6 to do the compilation (same arguments, just using the x86 compiler, not the cross compiler) - it correctly embeds the debug information.
View 2 Replies
View Related
Apr 30, 2011
I've getting strange build errors when using make-kpkg with the latest (2.6.39-rc5) vanilla kernel.I'm using the procedure outlined here:
https:[url]....e.g.:
Code:
make oldconfig CONCURRENCY_LEVEL=`getconf _NPROCESSORS_ONLN` fakeroot make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers
I'm getting the following build errors:
Code:
Building modules, stage 2.
MODPOST 3053 modules
WARNING: modpost: Found 60 section mismatch(es).To see full details build your kernel with:'make CONFIG_DEBUG_SECTION_MISMATCH=y'
CC arch/x86/crypto/aesni-intel.mod.o[code]....
There is even much more error output but it looks like it is basically the same issue.
View 2 Replies
View Related
Feb 14, 2011
Still I am asked to package a war file as an RPM package. That is an unusual RPM packaging(To me). If you guys could guide me I have a war file inside a folder, that folder is inside a tar file as a SOURCE for RPM package. The structure is like below.
[Code]...
I simply want that the war file from sources is transferred to the web app of my tomcat server through RPM. I try to package it as an RPM, but its always giving me errors in %build stage. When I try to remove %build from stage from the spec file, then it says command missing.
My system details are:
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 1
LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64"
View 5 Replies
View Related
Jul 22, 2010
Can anybody tell me what kind of fsck errors are found on a system?
View 5 Replies
View Related
Feb 20, 2010
I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
View 9 Replies
View Related
Feb 16, 2011
looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies
View Related
Sep 24, 2009
as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
View 1 Replies
View Related
Feb 11, 2011
I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
View 1 Replies
View Related
Sep 16, 2010
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
View 2 Replies
View Related
Apr 19, 2011
Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.
View 5 Replies
View Related
Feb 22, 2010
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
View 2 Replies
View Related
Feb 26, 2010
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
View 1 Replies
View Related
Oct 1, 2010
I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA
Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices
[Code]...
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)
View 11 Replies
View Related
Aug 20, 2009
I'm building a perl rpm package, but cannot accomplish it under some conditions. I'm building the package on the Fed. 10 as this is my development distro. However the target machine runs on Fed. Core 4 and I cannot access it now in order to build the package there.
If, in the spec file I set 'INSTALLDIRS=vendor' the rpm gets created OK. If I set 'INSTALLDIRS=site', which is my final intention the rpmbuild cannot finish packaging. In the '%files' section the rpmbuild expects the man page to be in '/usr/share/man/man3' ( as to the %{_mandir} content ), however the man page keeps on ending in '/usr/local/share/man/man3' instead.
I tried to add 'INSTALLMAN3DIR=/usr/share/man/man3' to the %{_perl} Makefile.PL line, but still no success. I also performed some "queries" to figure out what may be the core of the problem and here is the result:
[zby@localhost ~]$ perl -V:man3dir -V:sitelib -V:vendorlib
man3dir='/usr/share/man/man3';
[Code].....
View 1 Replies
View Related
Nov 27, 2010
I am trying to compile the kernel version 2.6.20-15 on my Linux 10.10 with 2.6.35-22 kernel. Additionally, this is my assignment.After I download kernel, extract it and create a new .config file for the new kernel I am trying to command;make-kpkg clean fakeroot make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers.after the second command I get an error an it says "nothing to be done" but I expect to have some .deb files for the new kernel. In addition this I have added a new system call to the kernel 2.6.20-15.
View 1 Replies
View Related
Mar 10, 2010
I've been using and relying on linux for some time. I have even tried distributions like Arch. I was wondering what would be a good book for learning the inner workings of linux, how to write shell scripts, compile my own kernel, how to build my own distribution, things like that. I also would like to know if there is a good book for linux networking works. I want to be able to modify distributions specifically for my hardware, and have a better home net work set up.
View 1 Replies
View Related
Apr 11, 2011
I am trying to build a rpm that basically changes the root password on a system. Here is what my spec file looks like:
Summary: Update the root password
Name: update_passwd
Version: 1.0
Release: 1
[code]....
However, when I run a "rpmbuild -ba specfile", I only get a *src.rpm under /usr/src/redhat/SRPMS, but no rpm file. I have never created a rpm and was wondering if there is something I am missing in my spec file?
View 7 Replies
View Related
Jan 18, 2010
I am trying to build an application on linux and it requires compilation of several files along with my application. Till now I have been trying using a makefile which is built for a test application which uses almost the same files as the mine by replacing its main.c file. But mow have ended up writing everything, function declarations, definitions... in the same file looks very unprofessional and is quite difficult to manage. an IDE to build this? I saw quite a few IDE's supported on linux but they are all appropriate for C++, GTK, java languages and not C.
View 6 Replies
View Related
May 17, 2011
I will like to build a Linux Kernel, how easy is it to build one?
View 9 Replies
View Related
Apr 8, 2011
I am in the beginning stages of building an LFS (http://linuxfromscratch.org) system, but the thing is I don't have any space on my laptop to build it on. However, recently the GPU on my desktop went down and I have been unwilling to take the steps to have it fixed (variety of reasons). My main worry about building an LFS system was about rendering the computer unusable, but since this machine was already broken...I am looking at this as an opportunity.
I had two hard-drives on the desktop, one with linux (ssh enabled) and the other had windows which I subsequently deleted. Since I can't use the desktop directly because of the broken GPU, I am thinking of using ssh to connect and build the rest from there. So far, everything seems to be going according to plan, but I am just beginning the build, so thus far I have only partitioned and built the filesystems.
View 1 Replies
View Related
Aug 27, 2011
I have a USB 3g modem, which also supports voice calling, I want to implement IVR ( Interactive Voice response) with it on linux, Can I do it with Asterisk? If yes, then please help me on how to do this ( references) ?
Is there example or howtos available to do this?
Can I develop IVR system in linux without Asterisk?
Note: I am very new to Asterisk and IVR.
View 2 Replies
View Related
Feb 13, 2011
I'm new to Linux, and want to build a system for openSuse 11.3 on Friday.I plan to buy everything then.I'm using Ubuntu now on my laptop.My question is what do you think of the P4 prescott e series 800 mhz FSB as a processor for openSuse.Offer other processors if they will do a good job.
View 1 Replies
View Related
Aug 16, 2010
I'm trying to build the glibc-2.3.6 (with debug symbols) for a powerpc system. I need to compile this libraries with gcc 4.1.1 and binutils 2.16.1.
All my tentatives fails and I don't know how to start with the process of building.
View 2 Replies
View Related
Mar 1, 2010
I just finish my LFS distro and now the only way I have to install it on another computer is copying files from a box two another. I want to make this proccess easy, user friendly if possible, like making an install DVD that I could just put in the drive and choose install, no livecd is needed.
View 3 Replies
View Related
Oct 26, 2010
I am using ubuntu hardy and python 2.6.5 (built from sources). For a custom python packager I need to rebuild python interpreter (python executable). I am new to linux and don't have much knowledge of gcc and other stuff. Here is the process:1. Copy python.c as myapp.c. myapp.c is in the same directory (python2.6.5) in which I have all the required files. 2. Using the syntax from makefile of python sources, here is my first command to produce myapp.o
Code:
gcc -pthread -c -fno-strict-aliasing -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I. -IInclude -I/home/zeno/installed/Python-2.6.5/Include -fPIC -DPy_BUILD_CORE -c myapp.c -o myapp.o
This produce myapp.o but throws a warning:
Code:
myapp.c:24:2: warning: no newline at end of file
Next is to produce the executable or python interpreter:
Code:
gcc -pthread -Xlinker -export-dynamic -o $@ myapp.o -L. -lpython2.6 -lpthread -ldl -lutil -lm -o myapp
This is causing an error:
Code:
/usr/lib/gcc/i486-linux-gnu/4.2.4/../../../../lib/crt1.o: In function `_start':
(.text+0x18): undefined reference to `main'
[Code]...
View 1 Replies
View Related
Aug 6, 2010
I tried to build VLC from source and stuck up with the following error.
configure: error: Package requirements (fribidi) were not met:
No package 'fribidi' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables FRIBIDI_CFLAGS
and FRIBIDI_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
[Code]...
View 6 Replies
View Related
Aug 26, 2010
I need to build a cluster with vmware with 2 linux nodes but I'm a bit of a begginer. I have this questions:
Wich vmware to use (server, workstations)? Do I need a server OS? Wich linux OS to use? how to create the cluster? How do I test it? How do I run a program in paralel?
View 14 Replies
View Related
Aug 11, 2011
I want to build some small soft wares in linux .
Example there is OS called ttylinux [URL] it supports only few packages , example it doesn't support GCC compiler etc .. So I want built this packages to the os and create a final image out of it .
View 4 Replies
View Related
Jun 29, 2010
We are working on 2.6.28. We have a requirement that we should boot using a non compressed kernel image. how can I build a non compressed kernel?
View 1 Replies
View Related
