General :: Apache Refuses To Take Into Account Second Site
Aug 27, 2010
I need just like that hand I installed my server on a base DEBIAN configured Apache which works with a site. I want to put to hand a second site and the I have the following problem. Apache refuses to take into account the second site. I activate it with the command a2ensite my domaine.com and I have the following answer.
ERROR module mon domaine.com does not exist
I have the same road as for the first site which works her then I do not understand any more.
View 2 Replies
ADVERTISEMENT
Mar 24, 2010
I installed apache on my local machine to test websites. I have one problem: I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.) Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/site1/public_html
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
[Code]...
View 1 Replies
View Related
Dec 18, 2009
openSuse v11.1
Linux 2.6.27.39-0.2-default x86_64
VirtualBox v3.1.0
One user account completely ignores all keyboard input. No other account demonstrates this bizarre behavior. The faulty account has had occasional keyboard difficulty but it has always been related to the Virtual Machines (VirtualBox); the hosting account always functioned correctly.
Then the ban on keyboard input. Poof! "Keyboard? What keyboard? I don't see no stinking keyboard!"
It is not the physical keyboard. Three different hardware exhibit the same fault. It is not the motherboard; two mb's show the same fault. It is only that one account. And I even took the Windows route of re-installing the OS (what a waste of time that was).
If something changed, I am not aware of it (although something must have).
View 9 Replies
View Related
Nov 12, 2009
I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!
View 2 Replies
View Related
Apr 6, 2011
I've successfully set-up Drupal on my machine on a local network and have no problem accessing it with the virtual host names defined in /etc/hosts, but I don't have bind or any other DNS set-up.I've installed Postfix and can sent email with the mail command to unix account, and I can also read them with the mail command( from the command line).Now, my problem is with not being able to use the local Unix email accounts in drupal. Particularly, I would like to have one of the unix account receive email for the development site.I might like to also have various user on the drupal installation, and then test sending notifications to them.here is my /etc/postfix/main.cf# See /usr/share/postfix/main.cf.dist for a commented, more complete version
View 2 Replies
View Related
Jul 29, 2011
Im trying to just set up my web page so it can be seen on my local home Lan (then Ill try to get it on the internet). I can see the site it on my pc but other network users cant.
They can ping my computer but cant telnet to it on port 6060 (thats the one is set the server up on)
What's wrong with my configuration its mostly the default with a few changes that I hoped would make the site work.
My ip 192.168.1.10
Here is the sites-available default file
Quote:
View 7 Replies
View Related
Aug 24, 2010
Only from internal lan. I have secondary IP address added for SSL site, and we are natting that address from that outside. I can hit it if I change my hosts file to that local IP on the server itself, but when using external NAT address it never hits the server. But if you telnet to that external address with port 80 or 443 it works.
Here is a sample of my config with servername and ip addresses changed:
<VirtualHost 192.168.150.100:80>
ServerName sample.website.com
ServerAlias sample.website.com
[code]....
View 1 Replies
View Related
Feb 15, 2011
I have httpd server installed and I need to do redirect all the requests from clients thats start with a http://abc.*.* on to [url]. I know this has to be done with Rewrite conditions but Im at a loss coming up with the right condition. this site doesnt have any virtual hosts configured. Currenlty I only can access the apache test page.
View 3 Replies
View Related
Nov 9, 2010
I have installed Apache on RHEL 5 ( my personal machine)Now i want to host web site on it for my personal use. Please tell me the step how to do this ?
View 3 Replies
View Related
Apr 7, 2011
after restarting Apache site is down?
View 1 Replies
View Related
Apr 13, 2010
On Fedora 12, I guess this is a security setting. How do I get Apache to pick up more than one website in my document root directory. It only picks up one and denies me permission to view the others on my document root directory. This problem doesn't exist in XAMMP. How do I go about it please.
View 5 Replies
View Related
Apr 28, 2011
teste.domain.com:
Code:
<VirtualHost *:80>
ScriptAlias /cgi-bin/ /home1/_sites/teste/site/cgi-bin/
<Directory /home1/_sites/teste/site/cgi-bin/>
Options FollowSymLinks +ExecCGI
AllowOverride None
[Code]...
View 2 Replies
View Related
Mar 24, 2010
I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
[code]....
View 4 Replies
View Related
May 24, 2011
I've had a recent idea to have PHP take information from a form, save it to a file, which in turn is read from a local script as root (cron) which will create the user account, proper directories, add the website to the Apache sites, and reload Apache. anyone actually accomplished this before? And if so, can I get some links or some ideas to possibly help me on the process of getting started?
View 1 Replies
View Related
Jul 23, 2011
I am trying to set up a home web server for my personal site using Ubuntu 11.04 and Apache. I have set up a user called www and given it FTP access to its home area (/home/www) using vsftpd. I then edited /etc/apache2/sites-available/default and set the DocumentRoot directive to /home/www. When I made a test index.html file in that directory it worked fine. Then I FTP'd to the server (as www) from another PC and uploaded the site files. Now when I try to access the site I get an error 403 (forbidden).Obviously I'm doing something wrong here but I'm not sure what. What should I do to fix this.
View 2 Replies
View Related
Nov 16, 2010
Is it possible to setup apache to normally block an IP from accessing a site until that IP is in a database/file?More or less, I need a login system that another script can add/remove the IPs and the site can be accessed by only those IPs.
View 1 Replies
View Related
May 28, 2010
I want to automaticly set the group ownership of user home directories to a group that the user is not part of. This is so that Apache can be part of this group and can access user public HTML directory, but other users are not able to access in any way the files in the users home directory. What I have seen that works manually is adding the user and then changing the group for the home directory. But I want to automatically set this when the user account is created. WHat I see happening is that when /etc/skel is copied, it automatically sets the group and ownership of everything to the users default group and ownership. I've seen some suggestions on setting permissions, but these don't seem to work because it seems that users are able to cd into a directory and not list it, but if they know the file name they can access the file.
View 1 Replies
View Related
Jul 22, 2011
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies
View Related
Jun 25, 2010
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
View 6 Replies
View Related
Jul 27, 2010
I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
View 3 Replies
View Related
Mar 25, 2010
I have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
View 1 Replies
View Related
Oct 3, 2010
Maybe a site-to-site Ouija board connection.
View 5 Replies
View Related
Nov 21, 2010
Ubuntu 10.x servervsftp mysqlwebmin Apache2I am running the Ubuntu server on the same 192.169.x.x subnet as the PC I am using to test vsftp and webmin and Apache.I can connect to the Apache web site hosted on the Ubuntu server but I cannot connect to any other service -- i.e. port 21 or port 10000 or 3306.Netstat shows:
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTENING
tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTENING
tcp6 0 0 :::80 :::* LISTENING
[code]....
View 2 Replies
View Related
Jan 10, 2011
I had Ubuntu guest installed on VMWare. The Host OS is Windows 7. But now I want to migrate it to Virtual Box. I migrated it, but it does not allow PUTTY to connect it. It says "connection refused". On VMWare on same host and same guest, PUTTY connection is successful. But it does not allow on Virtual Box. It says connection refused. Both on VMWare and Virtual Box, the guest Ubuntu is configured using NAT networking.
View 2 Replies
View Related
Feb 18, 2010
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies
View Related
Jul 16, 2011
I have a problem with the Google search box top right corner in Konqueror, when entering search I recieve an error page "Unsupported Protocol" Google asks for ioslave or kioslave. Also when highlighting text on a page and right clicking with the mouse no search option is given. I created a new user and all works as it should for the new user. What is wrong with my user account? I have reset default values in Konqueror setup.
View 3 Replies
View Related
Jul 25, 2010
I have like 4 email addresses on one Ubuntu One account and I'd like to remove them all except my current email... I also have an old account I'd like to delete. I used the contact form but to no avail.
View 2 Replies
View Related
Sep 6, 2011
I need to mirror a website. However, each of the links on the site's webpage is actually a 'submit' to a cgi script that shows up the resulting page. AFAIK wget should fail on this since it needs static links.
View 1 Replies
View Related
Nov 25, 2010
I will just ask on how will I ban a certain site to a certain IP address on the network? I am using Dansguardian Web filter.
View 1 Replies
View Related
Mar 14, 2011
i use this code to download :wget -m -k -H URL... but if some file cant be download , it will retry Again and again ，so how to skip this file and download other files ,
View 1 Replies
View Related
