General :: AWK Error In Slack 13

Jan 13, 2010

I install Slackware on Virtual Box with 02 Nic (Eth0: wan, eth1 :local), config iptable , bind for a small network, it works fine local PC can go internet and use DNS cache.

I try slack update and get the following error:

slackpkg update

awk package not found! Please install awk before you run slackpkg, as slackpkg cannot function without awk.

I try which awk

which awk
which: no awk in (/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/games)

View 7 Replies


ADVERTISEMENT

Slackware :: Error With Gnome Slack Build (GSB) - ((Error Org.freedesktop.DBus.Error.AccessDenied.))

Jan 19, 2011

after install slackware with gnome using gnome slack build it is work fine Except some thing :-

the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.

No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))

View 6 Replies View Related

Slackware :: Is There Something Seriously Changed From Slack 10 To Slack 13.1 ?

Apr 18, 2011

I have just reinstalled slackware on my old p4 3.2 box clean install formatted hard drive no other packages installed.is there something seriously changed from slack 10 to slack 13.1 ?? or do i suffer from C.R.S ( cant remember s***)

View 5 Replies View Related

General :: Couldn't Get Slack To Boot

Feb 5, 2011

I am writing this from my new MozillaFirefox browser, operational for 3 minutes.I started researching Linux Dec 27th, bot a couple of books, bookmarked about 20 sites c/w howto', FAQ's, LinuxBook, etc., printed about 250 text files (exhausted my lazer printer), downloaded/burnt DVD's for Slackware 13.1, Mandriva 10.1, utorrent (x windows so I could download it all), Easus Partition Manager and am finally here.

I couldn't get Slack to boot, nor could I get Mandriva to go either it has taken me 1+ month to get here. Finally gave up on booting from a usb and external hdd (thanks to a pair of SATA you know whats!)Yesterday, I repartioned my C drive (ooops, sda) and loaded up Mandriva...couldnt get it to function either. Tonight, went through the driver install program available with the load disc and read (& wrote down) the driver "failure" output. Reloaded the DVD, chose upgrade vs install, got to the hardware configuration screen and played with my video and sound settings, and voila

View 6 Replies View Related

Slackware :: "L 02 02 02" Error On When Upgrading To Slack 13.37?

Jun 22, 2011

I just upgraded from 13.1 to 13.37 and I'm getting the L 02 02 02 error. This means that lilo can't find the partition it's told to boot. It's strange because:

- I haven't tweaked anything in the hardware
- I kept the same partitions, just formated
- I'm using ext3, as with 13.1
- I installed lilo on MBR (while on setup, and later with -M /dev/sda)
- I choose the huge smp kernel, as with 13.1
- I have only two partitions, root (sda1) and swap (sda2)
- the root partition is the active one (asterisk), on fdisk

So I tried:

- reseting the BIOS
- removing the UTF8 setting on lilo.conf
- using the lilo.conf that worked with 13.1

They all failed. I don't even know what to try!

PS: The hardware is a Pentium 4 1500Mhz with 512MB RAM on Asus P4B.

View 5 Replies View Related

General :: Unable To Access Pen Drive On Slack?

Apr 7, 2010

i am not able to access my pen drive on slack ware

View 3 Replies View Related

General :: Slack Ware 10.2 - The Following Recipient(s) Cannot Be Reached ?

Jun 4, 2010

The following recipient(s) cannot be reached:

Im using slack ware 10.2 for may mail server.

View 8 Replies View Related

General :: LILO Fails When Run From Live CD After Installing Slack

Jul 20, 2009

I'm receiving the following error message when running LILO under SystemRescueCD after installing Slackware 12.2 (the slackware setup hung when installing LILO so I am trying to install manually - I have re-run setup, including formatting all drives again):FATAL: Trying to map files from unnamed device 0x0010 (NFS/Raid mirror down?)Let me know if any more information is necessary and thank you in advance for any help you can provide.

View 7 Replies View Related

General :: How To Connect To Internet Via USB Mobile Broadband In Slack-ware KDE

Jan 25, 2011

I am new to Linux .I am using ubuntu gnome desktop and i can connect to Internet via huawei e160 HSDPA usb stick easily.In Ubuntu network manager shows my broadband connection and by that i can connect.Few weeks back i install Slackware KDE desktop and still i couldn't connect to Internet.If some one know how to do it.

View 1 Replies View Related

General :: Synptics Touchpad "TapButton1=1" Does't Work Under Slack 13.1?

Jun 18, 2010

After clear installation of Slackware 13.1 GSB 2.30, and editing /etc/hal/fdi/polices/x11-synaptics.fdi .xml file "TapButton1" still does not work

x11-synaptics.fdi
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">

[Code]...

View 7 Replies View Related

General :: Switched Between Ubuntu & Slack - Won't Boot Due To Grub Boot Loder

Jun 25, 2011

i installed slackware then i unistalled it and installed debian then i decided to go back to slackware but it wont boot because i have the grub boot loder how do i fix this

View 2 Replies View Related

General :: Running Racer Game (not Tux Racer) On Slack 13.1?

Aug 20, 2010

I have loaded Racer (http://www.racer.nl) in Wine. When I run the game I get the options box (it acts a bit strange, but does seem to work) adjust some settings, start the game & then the entire program goes away. dmesg/syslog shows the same error messages:

racer.bin[32573] trap divide error ip:f7377486 sp:ffbdd2a0 error:0 in libfmodex.so[f732e000+1
racer.bin[32597] trap divide error ip:f7441486 sp:ffba5d00 error:0 in libfmodex.so[f73f8000+1

View 2 Replies View Related

Slackware :: Cannot Shutdown Slack 13.1

Apr 18, 2011

I've install Slackware 13.1 and i cannot shutdown my PC. The shut down process stop while trying to run PCMCIA module.

This is the first time that happens.

From Hardware point of view , i didn't do anything at all (if that helps).

View 5 Replies View Related

Slackware :: Upgraded Php To 5.3.x In Slack 13.1?

Dec 23, 2010

Anyone upgraded php to 5.3.x in slack 13.1?
Could you please share the slackbuild?

View 7 Replies View Related

Slackware :: Slack 13.7 KDE Seems Hanged?

Jul 2, 2011

I installed a slack 13.7 on an old laptop. KDE was set as default desktop. then I login and run startx and I saw KDE first screen display. after that I saw blank screen with a mouse on it. Then it stayed there and it seems try read some in my harddisk since the persistent harddisk light.

View 3 Replies View Related

Slackware :: Slack Won't Go To Sleep

May 2, 2011

When I try to put slackware to sleep or have it hibernate the system simply sits with a black screen. Normally it would do this for a short period of time immediately before the actual sleep state (screen powered off, croissant light on) is entered, but currently it does it indefinitely. My sleep USED to work just fine, it broke after some unclean shutdown or another, basically I just want to know what I can try resetting to try to get it back to normal.

Slackware64 13.1, running on thinkpad X61.

EDIT: Of course the second I make the post I think of trying to sleep/hibernate from the command line instead of through X/GDM (Gnome SlackBuild). That works.

View 1 Replies View Related

Slackware :: Upgrading Slack From 13.1 To 13.37?

May 2, 2011

I have some doubts about the official Pat's upgrading procedure. In the UPGRADE.TXT file, one of the stepts says:

Code:
upgradepkg --install-new *.t?z What does --install-new mean? Pkgs I have no installed on my 13.1 will be installed on the 13.37 upgrade? For example, I did not installed KDE on 13.1. Will be installed when upgrade? - What about third party pkgs? Slacky, SlackBuilds.org, compiled by myself. Should I remove them before upgrading slack?

View 10 Replies View Related

Slackware :: Why There Are No Smp Kernels On 64 Bit Slack

Sep 1, 2010

Does it mean that a 64 bit version is not multi-core?

View 11 Replies View Related

Slackware :: Webcam Not Working On Slack 13.0

Dec 23, 2009

I have a XPS 1530 and when I type

lsusb

[code]

It seems to be that the camera is recognized by the OS but it is not working when I try to use it in skype or in EVO.

View 1 Replies View Related

Hardware :: Slack 12.2 PS/2 Mouse Won't Work?

Jul 20, 2009

I've just come from version 12 to 12.2 and I'm suddenly having issues with a basic PS/2 mouse. I've been searching for over two hours and I've made multiple adjustments to xorg.conf with no luck. Apparently, I'm more of a newbie than I thought.Would someone be so kind as to give me a hand?

View 4 Replies View Related

Hardware :: Wacom Bamboo Pen Under Slack 13

Feb 24, 2010

I can't get tablet working under slack, the problem probably is just that no input device gets created. I compiled the driver myself (slack seems to come without wacom driver...).

Here are my settings:

xorg.conf:

Code:

Indeed, /dev/input/wacom does not exist. The control LED on the device is flashing and reacting to the pen.

View 10 Replies View Related

Server :: MySQL & Slack 12.2 With Getting The Thing To Run?

Mar 3, 2010

i installed MySQL 5.1.44 on my laptop and at first (2 days ago) it worked perfectly. I then decided to install the same thing on my server that also runs slack 12.2... it never worked. I initially followed the instructions step by step in the MySQL manuals and website, tried to get help from google, etc, but still doesnt work.

Basically, when I run /etc/rc.d/rc.mysqld start, I get:

Code:
nohup: redirecting stderr to stdout
Starting mysqld daemon with databases from /var/lib/mysql
STOPPING server from pid file /var/run/mysql/mysql.pid
100303 19:28:10 mysqld ended

[Code]...

View 2 Replies View Related

Slackware :: Armed Slack On Tonidoplug?

Mar 21, 2011

Has anyone here succeeded in getting armed slack running on a consumer kirkwood device .ie. one without serial console? I have a tonido plug that I want to liberate. By default the plug boots first from the external usb, so I would only need to set up / on the first partition. I would be very interested to know if someone had managed to install slack to the internal nand without bricking it.

View 9 Replies View Related

Slackware :: Bin File Installation In Slack?

Dec 18, 2010

I downloaded Qt SDK file (530 MB and file is ok ) qt-sdk-linux-x86-opensource-2010.05.1.bin, I type in console ( slackware ) like in manual for installation at site

Quote:

chmod u+x qt-sdk-linux-x86-opensource-2010.05.1.bin

but when I type second command for installation

Quote:

./qt-sdk-linux-x86-opensource-2010.05.1.bin

I get error message

Quote: bash: ./qt-sdk-linux-x86_64-opensource-2010.05.1.bin: cannot execute binary file How to install ?

View 7 Replies View Related

Slackware :: Can't Install Imlib2 On Slack-13

Jan 30, 2010

I compiled it from source, i installed it via slackbuild but it didn't work. When i go imlib-config --version it shows me the old one, and when i try to install giblib it tells me that imlib2 is not installed. I watched the output from the installing of imlib2 and i realized something's wrong: there are several suspicious warnings :

[Code]...

View 10 Replies View Related

Slackware :: Change BootSpash In Slack 13.1

Feb 8, 2011

I don't know if i'm doing anything wrong but, to change the bootsplash picture its just change the slack.bmp in lilo.conf and reboot?

View 6 Replies View Related

Slackware :: Creative Zen Not Recognized In Slack 13?

Mar 18, 2010

my problem, I have Slackware 13 dual booted with vista on a dell 1545 2 ghz 2gig ram. to these forums I have gotten everything working except my creative zen vision M 30g. I have tried alll the suggestions posted here and other places on the net. Here is my output from lsusb.

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[Code]...

any way i can transfer files back and forth to this would be great since it does not work in vista either. and I am pretty sure 99.9% that I have all the libmtp, libnjb, and whatever other libs are needed installed but in gnomad it says no devices found on USB hub. I hope this is enough info and someone out there has the trick or maybe I am missing something obvious.

View 2 Replies View Related

Slackware :: DBUS / Compiz In Slack 13.1?

Jul 9, 2010

i installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz
here is one example

Code:
dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?

View 3 Replies View Related

Slackware :: GNS3 V0.6.1 Install On Slack 12.2?

Feb 26, 2010

I have downloaded the packages from Slackbulids and installed also the required packages from slacky.eu but still it says that probably pyqt is not installed. I have installet latest Sip and latest pyqt ver 4.

View 1 Replies View Related

Slackware :: How To Reset The Modem In Slack

Apr 30, 2010

i know that there is a reset button on the back but after reset i dont know what to do with it. right now i m using pppoe connection which only works in windows and bt4 and i want to make it run in slack 'cause now slack is my main os(66hr since i switched to it :0) so i want to configure the modem in a way that i work in slack. and i m dumb about PPP/TCIP/DHCP and btw i like "the" slack

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved