Fedora X86/64bit :: VirtualBox - Give Permission For Guest Os To Use The Serial Port?
Jul 16, 2009
i'm running VirtualBox v3.0.2 on F11x86_64. As my guest in virtualbox i will am using xp sp3. In virtualbox settings i need the use of my serial port (e.g. com1). I have `enable serial port` ticked, port number set to com1, port mode set to host device and port/file path set to /dev/ttyS0. I have done hours of searching and this is the best i have come up with so far. My question is this: How do i give permission for my guest os to use the serial port?
View 4 Replies
ADVERTISEMENT
Jan 5, 2010
Tryin to update guest additions to match new host. Change fstab to allow exec. Still get permission denied.
debian:/home/bill# cd /cdrom
debian:/cdrom# ls -lh
total 30M
dr-xr-xr-x 3 root root 2.0K 2009-12-17 07:37 32Bit
dr-xr-xr-x 2 root root 2.0K 2009-12-17 07:37 64Bit
-r-xr-xr-x 1 root root 217 2009-12-04 04:06 AUTORUN.INF
[Code]...
View 5 Replies
View Related
Apr 3, 2011
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies
View Related
Jun 3, 2010
I had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).
View 5 Replies
View Related
Mar 4, 2010
OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
View 1 Replies
View Related
Jan 13, 2010
I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0
in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but
cat < /dev/ttyS0. just prints out weird characters from what I type.
View 3 Replies
View Related
Apr 27, 2011
I am using Fedora 14 64-bit and after login through a user other than root when I try to open any folder on other partitions I get the message that I don't have permission to access such and such folders.
View 7 Replies
View Related
Jun 3, 2011
I've installed fedora 15 on virtualbox as my guest OS.I've configured bridged networking and I've set my router to assign an IP to it.when it boots up,I have 2 devices shown via "ifconfig" which is "lo" and "p2p1" and none has the ip assigned to it.I'm unable to access the Internet. How can I configure it to do so?I've tried following this tutorial: [URL] but the file "ifcfg-ethX" doesn't exist...it only has ifcfg-lo..... I've installed fedora 15 spin edition which doesn't have a GUI for me to edit network settings...
View 13 Replies
View Related
Apr 21, 2011
How to give a permission to access any folder and file
View 2 Replies
View Related
Mar 23, 2010
We have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?
View 3 Replies
View Related
Dec 9, 2009
I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
View 8 Replies
View Related
Jan 3, 2010
I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:
Booting from local disk...
FATAL: INT18: BOOT FAILURE
There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?
View 5 Replies
View Related
Apr 10, 2010
I just installed Fedora 12 VM using Virtualbox. The next thing I want to do is install the guest addons.So I mount the drive and go the the folder and I use the command:
Quote:
su (my username) VBoxLinuxAdditions-x86.run After that I give my password. The message I get is that This program must be run with administrator privileges. Aborting What Have I done wrong? I used su and gave my password, but it still is refusing to install.I am sure I am missing something very simple.
View 9 Replies
View Related
Jul 23, 2011
where to download Guest Additions Virtualbox for Fedora 14 ?
View 4 Replies
View Related
Aug 3, 2011
If i specify 512MB memory from my 2GB RAM, is it reserved forever? or only works when i am running vbox guest os?
View 4 Replies
View Related
Feb 2, 2009
i am planning on installing virtualbox on a fedora 9 machine and would like to know if it is possible to migrate another fedora 9 (totally seperate) machine to a virtualbox as a guest OS.
View 1 Replies
View Related
Mar 25, 2010
Can anyone one give me some pointers please, for talking to a serial port, if I use cutecom it always returns "could not open /dev /tty0 or 1 or 3 or 4, even tried ttys0 etc
View 7 Replies
View Related
Jan 19, 2011
i would like to connect to my cisco via a console port and i dont konw how
View 13 Replies
View Related
Feb 16, 2010
I have the nvidia 121.21 file for XP and Win2K. I have the driver running on this box on a dual boot win2k install. works fine. The same file on my guest win2k VirtualBox install says no driver available for my current hardware setup. My video card has the 8400 GS chip set. It is currently running 3D on This Fedora 12 install. Is the problem the VirtualBox will not allow the 3D driver to be installed. The installation had a comment about no 3D when it started. I also have not been able to get control of a USB port Device I need. There any way to have Virtual and 3D video drivers with a USB port?
View 6 Replies
View Related
Mar 27, 2010
Can anyone help me with how to create an init.d script that will startup a vm machine in virtualbox at boot? I found this script:[URL]..But it is for ubuntu. I am running fedora 12 x386 and using it as an Amahi server. Very cool, but it would be extra cool if I had a virtual windows machine startup when I booted up this server. Then I could just rdp into it when I needed something in windows.
View 3 Replies
View Related
May 24, 2010
My program tries to open serial port on Fedora 12, and shows "Access denied" on Open Port operation. The same program runs successfully with root rights. What can I do to get COM port access as regular user?
View 2 Replies
View Related
Sep 24, 2010
I think I need to mount a serial device, but not sure how. I looked at /etc/fstab, but cannot determine what to put in for the mount type. And, not sure what port it would be exactly... imagine either "ttyS0" or "tty0". Can someone give a newbie some guidance on how to possibly mount this device?
View 2 Replies
View Related
Jun 7, 2011
have a new HP Compaq 8200 elite. I have a dual boot system. Windows 7 and Fedora 15.In Fedora I cannot seem to connect to the serial port. Could anyone help me with resolving this. I've never had issues with hardware before in Linux so this is a little new to me.
Code:
[matt@matt ~]$ dmesg | grep tty
[ 0.000000] console [tty0] enabled
[code]...
View 3 Replies
View Related
Jan 13, 2011
Error " unable to build kernel module " see the log file /var/log/vboxadd-install.log for more details.
View 8 Replies
View Related
Apr 20, 2011
I've just had to change the MOBO and trying to get the serial port working, I see from previous posts there are some problems lurking in the past.
setserial -g /dev/ttyS*
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
but I'm not seeing anything from a GPS receiver in NMEA at 4800 no par 1 stp I know that was working about a year ago. I think udev was not helping ,as I was getting permission denied to the com port, I added myself to group dialout. and no message on startup now
I need to be able to talk to a piece of kit with 9600 baud and nothing. I have win32 s/w to drive it , but it falls over in wine. My laptop still has win7 on it in a tiny partition but no 9w d connector and I'm waiting for a USB converter cable. Too many variables ! I'd forgotten all the hassle of having to install drivers just to get basic things running. But as the stupid thing couldn't manage using the driver for my NIC, I was stuck with hyper-terminal, and nothing from the GPS board @4800 or another piece of equipment running at 9600. I suspect the com port on the new mobo doesn't wan to play
View 2 Replies
View Related
Mar 9, 2011
I want to create a virtual serial port in Fedora. I'm using Java code to communicate over a serial port. I want to test this code with out any serial devices connected.
View 1 Replies
View Related
May 10, 2010
I'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.
[Code].....
View 9 Replies
View Related
Dec 16, 2009
I am trying to connect to a cisco console port using the usb to serial converter. I am using minicom and I changed me setting to reflect the USB converter cable, but it isn't working. I have set my baud rate to 9600, 8 data bits and no parity. Minicom acts as if it is connected (it doesn't give any errors), but there is nothing on the screen and nothing happens when I type. Also, I use the tail command and it sees the usb connector connected when I unplug it and plug it back in.
View 10 Replies
View Related
Feb 4, 2010
Does an have Mocship MCS9901 adapter in use. I cannot even install driver. Is ti the PC adapter between since this is express card. What to do?.
make[1]: *** [_module_/home/Xx_Xxx/Desktop/MCS9901_Linux/version1.6/starex] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.31.12-174.2.3.fc12.i686'
make: *** [default] Error 2
View 3 Replies
View Related
Dec 27, 2010
I am doing work on serial port. I want to send/receive data to/from Microcontrolar through serial port. But I don't know how to initialize, receive and send data to Serial port. i am new in fedora so i hav'nt any deep concept of fedora.can anyone send me C code , which communicate through serial port in fedora (or atleast help me). I am using Fedora 11.
View 6 Replies
View Related
