I've got a problem, the interfaces are shutted by the system, so after the reboot I have no network conectivity even if I used the setup command to configure the interfaces.
View 14 Replies
i'm working on a brand new supermicro workstation with Fedora 9 installed. I've installed only matlab r2009b. PROBLEM: every time I login the system shuts down automatically in a few minutes.
View 2 Replies View RelatedRecently I installed Fedora 12 64bit in my HP Compaq 6720s. Among many other problems that I had and I solved with your help, I have the following problem:When I restart or shut-down Fedora 12 it crushes and hangs and only thing that I can do is to stop and restart my laptop by means of ON/OFF button.My question is:Is there any way to see this error (maybe some log file or something) so I can send this message or log file here in this forum and get some help?
View 1 Replies View RelatedUnfortunately accidentaly I disconnected my usb drive my computer and my VMs run from so I just rebooted for a quick fix Now I can't open virt-manager locally and the VM's can't get network connections I see this in the logs after the last two reboots
Code:
grep lxc /var/log/messages |tail -n 2
Jan 7 00:45:04 F820 libvirtd: 00:45:04.524: warning : lxcStartup:1895 : Unable to create cgroup for driver: No such device or address
Jan 7 11:52:53 F820 libvirtd: 11:52:53.325: warning : lxcStartup:1895 : Unable to create cgroup for driver: No such device or address
[code]...
I tried restarting libvirtd after with no love so I rebooted and cgroup was gone this was a clean install of F14, after this started I brought the system current, I can provide the packages installed but they errors didnt change
I have 3 Interfaces for a different LAN's and when I start one interface the another interfaces goes down.How can it's possible?I configure my ethernets as:
Code:
/sbin/ifconfig eth0 172.16.3.108 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth1 172.16.3.109 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth2 172.16.3.1110 netmask 255.255.0.0 broadcast 172.0.255.255
DSL modem is a Speedstream 6520 router. All computers work fine via dhcp. I'm trying to setup a small server (print server, ssh & ftp servers). I understand enough of the software part of things to get it going, my problem is setting a static IP on the server box. Every time I set the IP in the /etc/network/interfaces file and reboot, I have no network connection. I can talk to the modem through the browser, but nothing beyond that, not even local computers.
/etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.254.202
network 192.168.254.0
netmask 255.255.255.0
gateway 192.168.254.254
ifconfig shows the .202 address, but box can't get to the outside world, and can't ssh into the box from a computer sitting next to it. If I let it dhcp, then I can ssh into it, and have access to the internet. In the modem, I have dmz set for that address. Wan address is static. I can ssh into it if I let it do dhcp, so I know it can work that far. But if I set static ip, I might as well pull the network cable. I've been beating my head on this for over a week, and I'm lost why I can't get it to work. I even changed the dhcp range on the modem, so the .202 is not in that range. There is no dhcp client installed that I can find. I'm using WattOS beta3, which is a light distro based on 9.04. The computer is an old Dell GX150, integrated nic. I have done ifdown and ifup eth0, still no happiness. Doesn't seem like it should be that hard, but I'm stumped. DMZ should let everything pass, so don't need to mess with port forwarding and such. I know it works using dhcp.
The ethernet configuration files are under
"/etc/sysconfig/network-scripts" such as "ifcfg-eth0:1" etc.
The file looks as follow:
Code:
DEVICE="eth0:1"
BOOTPROTO="static"
ONBOOT=no
IPADDR="172.23.17.10"
NETMASK="255.255.255.0"
ALIAS="yes"
I've set the ONBOOT=no. This means this device should not be activated at boot-time. But as I reboot the machine, this device is activated again. This means the option ONBOOT doesn't work. Seems this is a bug of RedHat LINUX?
Last night I created a fresh install of Ubuntu Server 10.10. I was working through a tutorial to set up a development server for home use, and everything worked perfectly. I was able to install OpenSSH, Apache, MySQL, and PHP (and Vim) with no problems. I was also able to use "ifconfig" to determine the network address of the server and I was able to view web pages on the server from another machine on my home network, using a browser. So, everything was "peachy". [By the way: The server is connected to the router using a CAT5 cable. This is a WIRED connection] I shut the Ubuntu server down at the end of the night and, now that I have rebooted this morning, I have apparently lost the network interface. I cannot ping anything from the server. If I run ifconfig, only the "lo" configuration is listed, with the 127.0.0.1 address.
[Code]...
I have a weird issue that I have not seen on any forum. My jaunty on DELL studio laptop seems connected to net, but I can not access any network service (ssh, firefox etc.). But when I connect a cable the cable lights blink as it should be and in wireless connection my wifi light blinks.
It was working 2 days ago without problem, and I have not done big changes recently.I removed and reinstalled network-manager and network-manager-gnome. Nothing changed. I see a message in each restart as follows (when Openafs is starting). I can reproduce it with "/etc/init.d/openafs-client restart"
Code:
ADVISEADDR:error in specifying interfaces: no existing ip interfaces found
#lspci
Code:
04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
#lshw -c network
[code].....
If I try to add a new interface (eth1) to /etc/network/interfaces, I get
Code:
* Reconfiguring network interfaces... SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
How do I add 2 interfaces and get anyone of them to work, as available ?
running Debian Squeeze (standard 32bit squeeze Kernels linux-image-2.6.32-5-486 and linux-image-2.6.32-5-686) happily without trouble on a 64bit capable Samsung laptop featuring an Intel T3200 Dualcore processor. However, when I try to boot using the squeeze 64bit kernel (linux-image-2.6.32-5-amd64) the system proceeds through a few text lines immediately after Grub, and then performs a warm start.
The text output I get immediately after Grub look similar to the ones I get booting the 486 and 686 kernels, without any indication for the reboot behavior. The rebooting also seems to happen before any entry is written into the boot/system log files (logging is enabled). This behavior also occured when I first tried to prime the machine from the Debian squeeze install CD using the amd64 kernel. I'm generally happy with the 32bit kernels, but I'd like to use the amd64 support to do some Java compatibility testing for 64bit architectures.
The Laptop is a Samsung R510-Aura T3200 Delfina with the following Hardware and Setup (using Grub as boot loader):
- Intel Pentium Dual CPU T3200 @ 2.00GHz (see http://ark.intel.com/Product.aspx?id=37160 for details)
- NVIDIA GeForce 9200M GS
- 3GB RAM + 1GB reserved for GeForce
- Konfiguration Details:
-- Phoenix Bios
[Code]....
Maybe a strange BIOS-Setting that works with the 32bit kernels but not with the 64bit kernel? I've seen a post on here that indicates someone is running the amd64 kernel on a T3200 successfully, and the chip is definitely 64bit capable, so the reboot behavior is a complete mystery for me
My F14 shuts down for no reason on my laptop Acer Aspire 5738ZG. I can't give any info when exactly this issue occurs. It could happen during any type of activity from watching a movie to reading a document. There is also no specific time when it happens. It can do it 5 times in 30 minutes or once every few days.
View 6 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedAfter I login as root, it displays the MOTD and shuts down. During the bootup process it says that Runlevel is set to 0. I checked through init and inittab, the runlevel was still 3. I didn't think this would be it because I'm already logging in, but I figured I'd try. I went through rc.sysinit, rc.local, shadow and profile and I cannot find a reason for it.
View 4 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
I have a wide screen monitor (1440x900). I would like to change the fonts used when the machine boots and shuts down. Right now they are huge and the first 1-2 characters are hidden.
View 3 Replies View Relatedafter I upgraded to Goddard I am experiencing a strange thing. Whenever my computer shuts down abruptly due to power failure or some other reason, it shows the snapshot of the last session for a second or so just after the splash screen when I start it again.
View 2 Replies View RelatedEdit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing
Iam trying to install F15 64bit but I failed my hardware as folow
mb : asus m5a88m
cpu: amd phenom ii x6 1100t
ram: 8 gb 2x4gb Kingston 1333
hdd : wd 1tb sata3
wd 1tb sata2
vga: ati 4250 b/in
installation media: downloaded dvd image burned the image installed correctly inside vmware and work as expected but the media boot to the first screen quistion and when press ok for new installatin the answer is a serious of errors messages (a lot of it). did my hardware not compatible??
last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies View RelatedI just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.
I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!
This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason
I have Intel Pentium Dual Core E2180 / 2 GHz processor. i just upgraded my system with 4 memory sticks i.e. 7GB of RAM due to my requirements. Now the issue that i am facing is that my 32bit fedora system does not showing and suppoting more than 3.XX gigs of RAM when i consult "/proc/meminfo", "free -m" and "top". Now i have done two thing, first i have installed a PAE version of kernel. In result of this my system become two slow with the following error at startup. Error: starting udev: wait timeout. will continue in the background <Failed> Secondly, i installed a 64bit version of Fedora 10 but still it showing not more than 3GB of memory. Also a kernel bug system alerts me of not supporting more than 3gigs of RAM and ask me to send that bug to[URL]
View 14 Replies View Related
