Windows sever 2008 has done something different to their file sharing. This is not an issue with 2003 server, xp, or any linux samba share
Issue: Cannot copy file to windows server 2008 share
I can however, delete files, rename files, etc... which will indicate that there is not an issue with write permissions.
I am accessing the file via dolphin KDE
I am trying to mount a shared drive on a Windows Server 2008 machine using a Linux machine (Fedora 13). I try mounting by
# mount //HOSTNAME/SHARENAME /mnt/FOLDER
and I get mount error(13): Permission denied.
I have tried other options like # mount -t nfs //HOSTNAME/SHARENAME /mnt/FOLDER -o username=USERNAME and the same thing with different filesystem types (ntfs, smbfs, cifs).
I have:
checked all firewall configurations.
verified security/sharing settings
for the drive
verified registry keys under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNfsSvrParameters
verified NFS server is running
I am familiar with Windows Server 2008 but I have never configured a system from scratch on my own. The computer I'm using used to have Windows 7 for sharing folders to a Linux server. I have just switched to Server 2008 and have not been able to mount anymore.
One thing that I think is that I tried setting up an identity mapping solution; however, I do not have a domain controller setup. I am still functioning on a workgroup.
I am having issues mounting a share on a Windows 2008 Server from all of our Redhat 4 machines. I am trying to back up files before wiping and upgrading them to 5. I will try and post as much information that I gathered after trying different things. I am a newer hire for this network and a Linux newbie.
The scenario is this:
1. Windows 2008 Active Directory.
2. Redhat Enterprise 4 machines
I have root access and I tried entering at the terminal:
" smbclient -L "servername" -U "username"
get the "password" prompt I enter my password and get:
"session setup failed: NT_STATUS_ACCOUNT_LOCKED_OUT."
I check event viewer on the 2008 box and last week was seeing:
Event ID: 4625
Keywords: Audit Failure
etc, etc
"Account for which Logon failed:
Security ID: NULL SID
Account name: anonymous
Account Domain:MYGROUP
Failure Information:
Failure Reason: Uknown user name or bad password
etc, etc
Now the last couple of days the audit failures have not shown up on the 2008 Server box even though I attempted to log in.
The end users used to just use Konquerer smb://"servername"/"share" and it worked but for some reason starting last week this no longer works. Nothing was changed that I know of, this network is in a sealed classified environment with no external access. All additions to the network are monitored and no unapproved software is installed. The lab is in a vault type environment and only a few people know the combination and alarm pass codes so no chance of somebody adding stuff without me knowing it.
I would think with the locked out message it was an issue with my user account but that works fine on the Windows side so I tried my Linux credentials with no success when trying to mount the directory.
Is there something anybody can suggest Linux or Windows side to check? No user accounts work connecting to the Windows share.
p.s. I am aware the above command is only to see the Windows shares but i get the same thing when I just try and mount using CIFS or SMBFS.
I added my SUSE 11 linux server into the Active Directory. My smb.conf looks like this on my linux server
But I am unable to access this test share from windows 2008 server.code...
I need to connect a Server CentOS 5.6 with DB MySQL with a DB SQL Server 2008 on Windows Server 2008 R2 64bit, but i don't know how to do this.
So that MySQL DB has to import data from SQL Server on Windows Server.
I have Redhat 5 playing nice as it authenticates against windows server 2008. But I ran into issues trying to get Redhat 6 to do it as well.
Here is where I stand on my redhat 6 box:
I have my certificates working between the windows and the redhat box.
From Root user I can SU to an Active Directory user. getent works. I can see all the users info. ldapsearch works with the CA certificate so my SSL handshake is working. I do not suspect cert issues
But when I try to login as active directory on my Redhat 6 box I get told I used an invalid password. The password works just fine on the windows server, so I didn't fat finger anything. I am just confused as to why I can have getent and ldapsearching but can not login.
I have turned off iptables on redhat and the firewall on 2008 server to see if that would change the situation but no luck.
I noted that in Redhat 6 I need to config SSSD rather then NSCD.
Let me know if you need to see my:
ldap.conf
nsswitch.conf
sssd.conf
var messages
What I maybe doing wrong or leaving out in my configurations.
I can get a connection to Windows server 2008 using rdesktop 1.6, but after a few seconds the connection is dropped and I get a message of and internal licensing error. I think rdesktop 1.6 uses rdp 5.x, and WIndows server 2008 uses rdp 6, but there must be some way to get a linux terminal server client to connect to Windows Server 2008.
View 2 Replies View RelatedI tried to install Slackware on MS Hyper-V (Windows 2008 R2)?
View 2 Replies View RelatedI Installed Ubuntu 9.10 on perfectly working dual boot computer (I have Win7, WinServer 2008 & Mac OSX). After Installation, GRUB consolidated Win7 & WinSer 2008 and just put WinServer2008. Windows 7 totally disappeard. I'm sure it did't go any where, but GRUB did some consolidation and put just WS 2008.
Before Ubuntu 9.1.0 Install my Dual Boot OS are
Win7
WinServer 2008 &
Mac OS X
After Ubuntu 9.1.0 Install my Dual Boot OS are
Ubuntu 9.1.0
Windows Vista Loader - This is WinServer 2008 &
Mac OS X
I have problem with login into Windows 2008 server usning rdesktop 1.6. While I'm connect Windows 2008 host, prompts username and password i get an error: "Wrong username or password" but i'm sure that username and pass are correct (I can connect this server using windows Remote Desktop). My OS is Ubuntu 10.04 64-bit.
View 1 Replies View RelatedI was trying to connect to Windows server from 11.04 I knew the connection worked from a Windows 7 PC
terminal services client (rdp or rdpv5)An error has occurred Details: recv: ~Connection reset by peer
Fix I'd forgotten about the Windows server security. Control Panel, System & Security, System Remote Settings, Remote Desktop has 3 radio buttons. I changed from most secure to medium security.
Here is my config so far :
1. I installed Windows server 2008, with Active Directory, DNS, DHCP.
2. I installed Ubuntu 9.10 and joined it to the domain. Everything is ok. I can see the Ubuntu in the active directory, it gets an Ip address from the DHCP.
3. I create a shared folder on the server 2008.
4. I can access the server from Ubuntu ONLY by going to "Connect to Server" and entering the data to connect.
My problem :I would like to have the shared folder showing up when Ubuntu boots up or when the user is logging IN on the Ubuntu host. I have tried many things without success. I know how to do it so this is fine. BUT i would like a user to be able to access the shared folder without having to do anything (especially for users who are not familiar with computers). What is the best way to do it ?
Centos version: 2.6.18-92.el5
Processor:Intel Xeon L5420 Quad-Core
Guest OS:Windows Server 2008 Web
KVM is istalled using these instructions: [URL] When I run qemu-kvm to boot a VM off the Windows Install .iso with the -no-acpi parameter the VM displays the following:
Windows Boot Manager
Windows failed to start...
Status 0xc0000225
Info: Windows failed to load because the firmware (BIOS) is not ACPI compatible
Without the -no-acpi parameter, the Windows Server 2008 guest shows a blue screen with "stop: 0x000000A5" meaning "The ACPI Bios in this system is not fully compliant to the specification." [URL] 386/32bit and x86/64bit versions of CentOs both exhibit the problem. IT WORKS after I compiled and installed the latest versions of the Kernel (2.6.28.7) and KVM (84) (Using these instructions: [URL] Following advice [URL] I really don't want to run a custom kernel. I compiled various KVM versions with the 2.6.18 kernel but still get the ACPI problem or compiler errors or "Hypervisor too old: KVM_CAP_USER_MEMORY extension not supported" How to get a Windows Server 2008 guest running in KVM on Centos?
if there are any repositories with the newest samba version? I'm having a hard time installing it with my W2k8 Server.
View 1 Replies View RelatedI have too many problems to join my OpenSuSE 11.2 with Samba 3.5.4 in a Windows 2008 Active directory Forest (MYDOMAIN.LOCAL). I have updated Samba to 3.5.4 after read that default 11.2 version have too many bugs. Now, when I try to join the Domain MYDOMAIN.LOCAL via yast i have only an undebuggable error "unknown error". For yast, my Suse is joined but i'm unable to authenticate, i can't see "MYDOMAIN.LOCAL" at KDM login and if i try to lookup forest i have this error:
Code:
wbinfo -u
Error looking up domain users
but i'm able to retrive ticket via kinit
Code:
# kinit Administrator
Password for Administrator@MYDOMAIN.LOCAL:
[Code]...
have you a samba version tested against Active Directory 2008? can you link me the repository or help me to solve this?
I want to dual boot Windows Server 2008 r2 and Ubuntu 10.10 . First, I installed Server 2008 r2 then Ubuntu. After the installation, Grub only found Ubuntu, and "Windows Recovery Enviroment (loader)" on dev/sda1. The Windows OS is installed on dev/sda2. When i load "Windows Recovery Enviroment (loader)" it does a chdsk, then reboot the PC.
How can i make grub find the Windows OS?
Edit: The partition on dev/sda1 is called System Reserved
I am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
View 5 Replies View RelatedI have Windows 2008R2 Server acting as Domain Controller for Windows7/XP clients. and CentOS 5.3 Installed configured as Samba Server, I want to make it as ADS member server so any user to login to any machine, and be able to access their Samba share.
View 3 Replies View Relatedguide me to connect the SLED 11 SP1 to KEVIN.org (This is the name of my domain I created) Wich i created on windows server 2008.
View 9 Replies View RelatedWill there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
Using the following command, I can access a windows 2008 server: rdesktop -u myusername -d mydomain -p - -fP -r sound:local -r disk:myhome=/home/myhome serveraddress
connection works fine, and to start with I can see my local disk "\tsclientmyhome" and navigate around + open files. If I try to delete a file or rename a folder, I get an Error 0x8007048F:The device is not connected.
After this, I can no longer access the local disk. It says: "\tsclientmyhome is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Attempt to access invalid address." As I understand it, I should be contacting myself about permissions... Can anyone tell me what I need to do on my local ubuntu machine to fix this?
let me know the process to create Windows 2008 NTFS bootable partition from Linux?
View 1 Replies View RelatedI was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.
View 9 Replies View RelatedIntent is to use samba+winbind to authenticate Ubuntu desktop against a Windows 2008 R2 domain (seems like I was able to get it working temporarily but it stopped working after some time). Quick overview of the issue: winbind is failing to lookup group ID's for a domain user causing the domain user to receive group errors on login and an inability to use domain groups in other configuration (sudoers, etc)
- Very basic install, boot to Ubuntu Desktop 10.04 LTS 64bit install, basic install options, perform software updates
- Following an Ubuntu AD HowTo [URL]
- Install kerberos, samba, winbind packages
- Make changes to krb5.conf, smb.conf, files in pam.d/ (to make the home directory and restrict login based on group membership, which works even in the half-working state but requires SID instead of text name)
After a reboot I can login as a domain account but I get the following error(s):
groups: cannot find name for group ID #####
##### is usually a number that ranges from 10000 to 10020, based on the smb.conf line regarding idmap I will get multiple group errors (one for each group that the user belongs to that winbind can't lookup for whatever reason, some groups can be resolved - see below) If I log-out and then log-in as a local user I can run the following command: id username The output returns something similar to the following:
uid=10002(username) gid=10003(domain users) groups=10003(domain users),10033,10032,10031,10030,10029,10028,10027,1 0026,10025,10024,10023,10022,10021(some group),10020,10019,10018(some other group),10017,10016,10015,10014,10013,10012,10011(s ome other other group),10010,10009,10008,10007
On a working system (Ubuntu 10.10 and when 10.04 decides to work) each group is followed by parenthesis' and the name of the group, this result clearly shows that some groups can be looked up but for some reason other groups are failing An output of /var/log/samba/log.winbind produces the following entries (that are logged when you run the id command)
[2011/08/03 19:04:39, 1] winbindd/winbindd_ads.c:1137(lookup_groupmem)
lsa_lookupsids call failed with NT_STATUS_PIPE_BROKEN - retrying...
[2011/08/03 19:04:39, 1] winbindd/winbindd_ads.c:1137(lookup_groupmem)
lsa_lookupsids call failed with NT_STATUS_PIPE_BROKEN - retrying...
The above repeats for what looks to be each group that fails (based on count of entries)If I use wbinfo I can resolve text group name to SID and SID to GID
wbinfo -n groupname (returns proper SID)
wbinfo -s SID (returns proper text group name)
wbinfo -Y SID (returns proper linux mapped group ID)
Following that process for a group that my user belongs to that is not resolving (via the id username command) will return the group ID (GID) properly (even though id username fails to lookup info for that same GID) Version Information:
uname -a
Linux hostname 2.6.32-33-generic #71-Ubuntu SMP Wed Jul 20 17:27:30 UTC 2011 x86_64 GNU/Linux
lsb_release -a
No LSB modules are available.
[code]....
I am using F10 desktop edition, all the computers using windows are able to access the shared folders over lan except me using F10. I have tried many things with smb but still unable to connect.I am new to linux so i dont khow much of its technicalities.kindly suggest how can i be able to access the shared documents ..
View 1 Replies View RelatedI've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED".If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.
The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine previously will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling.
Usually you put external mounts in the /mnt folder, then link there with a symbolic link if you want access from somewhere else. By keeping all of your mounts in /mnt its easier to manage them as your system and ability grow.
You need to make mounts as root. Mounts take the data in the target and put it on top of an existing folder. When you mount something on top of a folder whatever was there becomes invisible until you remove the mount on top of it. If there is a problem with a mount and it does not work, any writes to the mount will go to the folder underneath, and any data you expect to read from there will not exist.
In making a mount you should realize that the char requires an escape char in bash to show up in the final output to the command. The escape char is also . Therefore to show \ in a Windows command, you need to type \\. Also, spaces must be escaped once with .
Howto:
You should substitute your ip or name for 10.10.9.5
Reminders: Make sure your Windows folder is shared read/write if you need to write to it.
You probably want to change permissions on /mnt/WindowsDocuments to 777
Tips:If you want a link from your desktop to your Windows "My Documents" folder you can now do this:
$cd ~/Desktop ln -s /mnt/WindowsDocuments WindowsDocs
This will make a symbolic link to /mnt/Windows, and if you execute: ls -l ~/Desktop you should see the links information in the response
Finally, if you want to keep a local backup of what's on the windows box in a local folder you could do:
The ~ char is shorthand for /home/<uername> and represents your home folder.
The result of the rsync command is to make a copy of WindowsDocs (which points to your mount at /mnt/WindowsDocuments which is linked to your Windows machine shared 'My Documents' folder) and put it into ~/WindowsDocumentsBackup
As always, make use of the man command if you get confused or the info command for more detail. ie man rsync
I am trying to share my printer with a windows xp machine.Samber server and configuration tool is installed. Still I have no clue how to get this to work. The printer is setup and working on my Fedora desktop.as anyone done this before and can give a step by step description on how to setup a Linux printer on a network (home-network) with windows.I already searched for it but non of the tutorial were clear enough or missing something.
View 12 Replies View RelatedI want shared folders and files between my desktop (Windows 7) and my notebook (Fedora 12). I installed with YUM the server SAMBA and configured all according this tutorial (http://www.ubuntu-es.org/?q=node/130156)
also configured the firewall with Firestarter, allow all entries for the HOST.
The problem is that in windows I can not enter to notebook or by network interface or by ip address. and viceversa.There is another option for sharing files, or what I do?
I'm running Fedora 13 on my laptop and am trying to share out a folder from a Win7 computer. Folder on Win7 machine is set to allow access to everyone.In Fedora, I have SELinux disable, I've made sure samba is allowed in the firewall, and that the smb service is running. There's no password on the Win7 computer, so in the Windows Share setting on Fedora I just put the username and left the pass field blank.
I've seen some things say all you have to do is go the the "Network" place...but somehow that seems to have become non-existent and I don't know how to get it back.Also, trying to connect to smb://WinShare/Share results in it saying that the server has timed out.