how to set environment variable as i am getting following message during ./configure.
checking for GtkGLExt - version >= 1.0.0...
*** pkg-config cannot find gtkglext-1.0 >= 1.0.0
*** Set the environment variable PKG_CONFIG_PATH to point to the correct
[code]...
I am supposed to create an environment variable with the PRINTER variable, which should resolve to the word sales. Would the command be like this?: env PRINTER - NAME=SALES (is this the command to create that variable with resolving the word sales to it?)
View 3 Replies View RelatedI'm trying to add 2 new environment variables (Debian . I have created a "/etc/profile.d/java.sh" file and in it I have added these lines (and just for the record, I've also tried adding those line to the profile file with the same results as explained below).
Code: Select allexport XAPPLRESDIR=/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/X11/app-defaults
export LD_LIBRARY_PATH=/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/runtime/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/bin/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/sys/os/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v85/runtime/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v85/bin/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v85/sys/os/glnxa64
The first variable "XAPPLRESDIR" is added just fine (I check by doing echo $XAPPLRESDIR). The second variable is not added. Here's what I discovered though, if I change the variable name to LD_LIBRARY_PATK (I change the word "path" into something else) then it works just fine... So how am I supposed to add this variable? I need it to be named just that...
Well on a Rsps forum it says that the reason i keep crashing in the client is cause my Envieronment Variable isnt set for Java. i was wondering how to do this.please make it deatailed since i am new to ubuntu and i dont know most of the things like usr/java
View 9 Replies View RelatedHow are environment variable set in tcl? I tried "set $env(MYVAR) xxxx" but it didn't work.
View 1 Replies View RelatedI'm setting my CLASSPATH in /etc/profile.d/jre.sh. In a login shelleverything is fine. In an xterm window, the CLASSPATH consists of two of every intended entry.In jre.sh I am doing aCode:export CLASSPATH=$CLASSPATH:/many/paths/to/jarsSo I'm guessing this is getting run twice in the xterm case. Can someone explain what's going on here and what I should do to remedy this?
View 12 Replies View RelatedI'm trying to set the environment variable. java_home and path.
I used the following instruction:
export JAVA_HOME=/usr/lib/jvm/java-6-sun-1.6.0.14
and to check :
echo "java_home=$JAVA_HOME"
and every thing is ok.
But since i close the terminal every thing is deleted.
I'm looking for the place where $HOME environment variable set. It is after login, to my mind.
I'm using Linux debian 2.6.32-5-686.
I'm trying to configure subclipse with JAVAHL for ganymede. I have everything installed and the right version of the JAVAHL.
I have seen that a lot of people uses java.library.path in the eclipse.ini file to set it up or just write a script for launching eclipse.
I have read about the .gnomerc file but i couldn't find it or create one and make it work. I'm using a 9.04 ubuntu.. is there anyway to configure an environment variable for gnome? What i want is just click on the shotcut and have it working, not having to run a script or all that stuff.
I just upgraded to 10.10, I use Tilda (terminal client) on my desktop but now when I type "clear" it says "TERM environment variable not set." instead of clearing the screen. Also commands like "tree" does not show folders and iles in color like they did before upgrading.
View 4 Replies View RelatedI have just installed Ubuntu onto my machine and my question is if it automatically comes with the PATH environment variable?If so, how do I add something such as python.exe to the PATH environment variable?
View 2 Replies View RelatedI am trying to create a launcher which runs virtual box from a custom config directory. For this I have to set an environment variable first then call VirtualBox command. From terminal it looks like:
Code:
helena@mint ~ $ export VBOX_USER_HOME=/mnt/shared/VirtualBox/
helena@mint ~ $ nohup VirtualBox > /dev/null 2> /dev/null &
If I have to create a shortcut for this, I am not sure how to define variable & call the command in a single command. There are some examples on:
[URL]
Code:
"DISPLAY=:0 xterm"
but when I try this, it wont work. My test.Desktop entry (I have started x on :1):
Code:
[Desktop Entry]
Encoding=UTF-8
Version=1.0
pCode]....
i have to set environment variables , after the installation of intel(R)MKL for linux OS given in intel mkl user guide, which are INCLUDE, LD_LIBRARY_PATH, MANPATH,LIBRARY_PATH, CPATH, FPATH, NLSPATH using the script file which, in my case,is "mklvarsem64t.sh"How can i set these environment variables?Do i need to set all these variables?
View 2 Replies View Relatedset the PATH environment variable?
View 4 Replies View RelatedIn C, there's a global variable 'environ'. With the help of linux manual, I know it's defined in <unistd.h>. But the fowllowing program is also right without <unistd.h>:
Code:
#include <stdio.h>
extern char **environ;
[code]....
When I put a "test" target in my Makefile containing
Code:
@echo "CXX= $(CXX)"
it tells me "CXX= g++".
But I have nothing in the Makefile assigning any value to CXX, and as far as I can tell I have no CXX environment variable (no "CXX" appears when I run the shell command "env", and "echo $CXX" returns a blank line. So where's the g++ value coming from. Is this just built into Gnu Make, or is there a configuration file for make somewhere?
I have been trying to change my PATH environment variable to no avail. I am using Jessie i386 with MATE. Using my .bashrc file works but not well because with subshells the modifications get repeated. I want the change to occur on login.
I tried modifying ~/.profile ~/.bash_profile /etc/profile and /etc/environment and one or two others but in no case did my change get picked up even after logging out and in again and even after rebooting. I searched the Internet and found each of the above places to make the change but they don't seem to work with Jessie.
Where do I make the necessary change?
I am trying to save the PATH environment variable from the Terminal running on a Ubuntu system.I typed in the following however it does not get saved.
export PATH=/home/david/Komodo-Edit-6/bin/:$PATH
I am happy to say that after almost a week of wandering around the INTERNET and posting desperate questions to our Ubuntu forums on how to set paths etc., I have finally begun to understand just how environment variables and path setting works. I must say, it wasn't all reading this or that, but rather making changes to my paths that helped me to understand. Anyway, if anyone who does not understand environment variables is reading this, then I recommend reading this
HTML Code:
http://java.sun.com/docs/books/tutorial/essential/environment/paths.html
and this
HTML Code:
http://www.belugalake.com/java/pathsetting.html
OK- I have 1 last question for my fellow linux users. Lets say I opened up $HOME /.profile and did some editing, and later decided to undo all of my changes but I forgot exactly what changes I made so now I want to set the default in there. How would I accomplish this? How do I set the defaults for any ~/.bashrc or ~/.cshrc type of files that I change.
I have a simple shell script name "run.sh".
Code:
export PYTHONHOME="lib/"
python dispatch.py
[code]....
I use Emacs and there's a bug that highlights everything whenever you use the ver scroll bar with your mouse. (My bad: Only wimps use Emacs in a window.) The workaround is to start Emacs with this on a command line:
Code: $ GDK_NATIVE_WINDOWS=1 emacs where "$" is the shell prompt. Q: how can I put this environment variable in the Emacs lauch icon? Or how/where can I put this in a .bash* file and have it activated (without relogging in)? I've forgotten so much of my Unix cave man skills with Ubuntu. . .
I use Emacs and there's a bug that highlights everything whenever you use the ver scroll bar with your mouse. (My bad: Only wimps use Emacs in a window.) The workaround is to start Emacs with this on a command line:
Code:
$ GDK_NATIVE_WINDOWS=1 emacs
where "$" is the shell prompt. Q: how can I put this environment variable in the Emacs lauch icon? Or how/where can I put this in a .bash* file and have it activated (without relogging in)? I've forgotten so much of my Unix cave man skills with Ubuntu. . .
im quite new to Unix stuff Im in need to add a script to be executed, in to /etc/inittab for that i need to get the path to my java installation. I have set the JAVA_HOME env variable already, my question is whether we can use JAVA_HOME in inittab? i mean, are those env variables are crated by the time inittab starts? if so, how can i add the entry
currently im having is like this
pse:5:respawn:su - <username> -c "$JAVA_HOME/other-path/pp.sh run"
is there any issue with the syntax?
i ran into a problem while isntalling xine player on fedora 11, i first of all installed its core engine 'xine-lib' successfully with standard prefix! when i run the './configure' for its frontend (xine-ui) it gives this error.
No package 'libxine' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XINE_CFLAGS and XINE_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
I am using Red Hat Linux Enterprise 5. I know the theory that -- using export to set environment variable, the environment variable will apply to current and child environment, but without using export to set environment variable, the environment variable will only apply to the current environment. What is the exact definition of "child environment" and "current environment"? For example,
Code:
$ var1=123
$ echo "Hello [$var1]"
The value of var1 (which is 123) is printed in shell, but I think echo is a command invoked by current shell, and it (the echo command) should be a child environment of current shell and the value of var1 should not (because not using export var1=123) impact echo.
How do you set current directory (full path) in an environment variable?
View 10 Replies View RelatedI have a application on linux , I can excute it in command line . but when I invoked it via CGI(perl) , it can not excute successfully , so I suspected that there is something different between SHELL and CGI environment , but I haven't figure out what the difference is .
View 3 Replies View RelatedI want to have an environment variable name (not value) containing ':', such as X:X=PQR. There seems to be no reason in principle why not. According to this:[URL].. the only printable character you can't have is '='. And indeed I can set and get such variables with a C program:
#include <stdio.h>
main()
{
setenv("X:X", "PQR", 1);
printf("%s
", getenv("X:X"));
[Code]..
and I can't find a quoting mechanism to make this work. Is there a unix guru out there who knows how to do this in bash, or any other linux shell?
I am trying to patch linux kernel 2.6.24.7 with drivers for via chrome 9, by guidance of this article:[URL].. the problem appears when I run command: make xconfig I have following errors CHECK qt
[Code]...
I have successfully installed XAMPP on CentOS. I can access PHPMyadmin from my browser. So my mySQL installation is OK. I need to set Environment Variable. I am confused about the path directory.
For an example in windows the path was:
%MYSQL_HOME% -------> C:xamppmysql
What will be the path for CentOS $MYSQL_HOME? Under LAMPP folder I did not see the "mysql" folder