I have both Firefox and Chromium installed on my system. I have Firefox set as the default browser, but if, for example, I open GIMP go to Help --> About then click on "Visit the GIMP website" it opens in Chromium, not Firefox.On Maverick amd64, fresh install.
I installed google-chrome and configured it as my default browser in my desktop "Preferred applications" configuration app, and in update-alternatives --config x-www-browser. I also exported the BROWSER variable to be = /opt/google/chrome/google-chrome (logged out and then logged in again). Although, If I open a XLS file with some links inside (OpenOffice 3.2.0) it opens links in firefox instead of google chrome. I surfed across all options in Tools->Options and there is nothing to set or change the default browser.
Is it possible to set a default setting for the terminal? When I open one up it is very small and I press the ctrl++ several times to get it so that I can read it?
Since I installed Chromium-browser, it has been set as the default system browser (don't know why, don't know when, maybe I clicked accept somewhere without paying attention). Now every web link I click (for example from Skype), Chromium will be opened instead of Firefox.
How can I make Firefox my system default browser?
I need to set this preference using the command line.
In 10.4 I had set my default terminal size to my screen width - I type some long commands. After running an update this morning, my terminal comes up in the install default size. Using the preferences dialog, I cannot find the control to set the default width. Has it been removed? I hope I'm looking in the wrong place, but I have a chilling feeling that it's been dropped or perhaps just accidentally commented out.
For some reason, i cannot set my default browser to Chromium. Whenever i open up Chromium, it asks whether it should be the default browser or not. I say yes i mean "Set as default" But nothing happens. When i open it again, i am greeted with the same question again.
I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
I have a directory '/usr/local/games/quake4'. I want permissions for the directory, along with everything in it set to: Owner: Create and delete files Group: Access files Others: Access files What would I type in terminal to make this happen?
I was doing some coding for school and i accidentally hit the button on my laptop to turn off the touchpad and everything started to bog down and slowly crawl or not do anything. So I reset the machine and the panel is completely backwards now. It still works fine but i would like it the original way. Is there a terminal command or setting i need to reset the panel?
I recently upgraded from 11.3 to 11.4 succesfully. I had to reinstall several applications and, some of them, can't be configured as default from the control panel (e.g. Opera as default browser, VLC as default media player). The problem is that droplists at the prefered applications don't show any other than the default ones, Firefox and TotemIs there a way I can change these settings via command line or a way to fix what applications are shown at the control panel?
I have updated from Fedora 14 to Fedora 15. I have both Firefox and Chrome installed. FF used to be the default browser, but since the upgrade, each time I click on a link somewhere (help pages, documents, terminal etc.) they are opened in chrome. How do I change it back to FF?
How do i type in an address into Nautilus (default file-browser in Gnome DE)? By default it shows me the folders as buttons instead of a typable url-type space, how do i change it to a white space i can key-into?
I tried changing my Theme via MAC4LIN and it didnt work i get an error messege that shows:
cp: cannot stat `/etc/gdm/gdm.conf': No such file or directory sed: can't read /etc/gdm/gdm.conf: No such file or directory sed: can't read /etc/gdm/gdm.conf: No such file or directory
Previous to this i had tried installing KDM but it didnt appear to do anything (as in change any of the display management settings) The guide that i was reading to install MAC4LIN just uses GDM so i decided not to pursue KDM anymore. I Get the following read out:
[Jason@Echo ~]$ yum info gdm Loaded plugins: presto, refresh-packagekit Installed Packages Name : gdm Arch : i686
[Code].....
The goal is to set all my GDM settings back to normal so i can have that gdm.conf file. Anyone know a way to set the GDM back and repair any damage ive done?
Am I safe when surfing the web with default Firewall setting? Can My Computer be hacked when the firewall is in the default setting? I have no knowledge on configuring Firewalls
I'm trying to connect to the internet though the terminal and I think i've determined my key is off.
Here is what I do:
Code:
So form this i go:
Code:
where the last four #### are actually the numbers but ii'm not sure if it's possible to reverse a wep. My connection uses wpa & wpa2 encryption but doesn't accept that key. I'm not sure what my key is supposed to look like or be but i'm pretty sure the key is whats keeping me from connecting. If I change my key while browsing the internet i can't get any information. So is it possible to just put in my pasword. Or what is the key supposed to look like?
I know - who uses parallel ports any more? People like me with an excellent, but old, HP OfficeJetPro 1150C. This is an old problem marked [SOLVED] in the following link to nowhere:
[URL]
I'm at Fedora 13 - 2.6.34.8-68.fc13.i686.PAE
Problem 1. /dev/parport0 is not found by sane unless you reset permissions after each boot 2. hplip udev rules only seem to support usb devices. 3. there are no/dev/parport[0-9] rules in udev/rules.d anymore 4. Did I read something about these ports being handled by HAL ACLs? If so, how do you do it?
default: ls -laF /dev/parport0 crw-rw---- 1 root lp 99, 0 Jun 23 07:48 /dev/parport0
must do at each boot: sudo chmod 666 /dev/parport0
I have already had Vista installed on another drive and from what i've read on the webs you get to dualboot if you install ubuntu after vista. when i did install it (i installed on a blank hdd with no partitions, choosing the "erase entire disk" option since for some reason default option was attempting to eat a part of my windows 1 gb drive instead of using disk i specially made for it) and the grub 2 loaded for the first time, there was NO option to run vista. only 2 linux (normal and recovery) and 2 memtests. I've ran linux and went to google this. I found that i should add something to some config files in /etc/grub.d/From reading the readme file i understood i could add my own files that are named like NUMBER_SOMENAME and insert code into them. Because it said:Quote: For example, you can add an entry to boot another OS as01_otheros, 11_otheros, etc, depending on the position you want it to occupy inthe menu; and then adjust the default setting via /etc/default/grub. But then i found a file 40_custom that said:
Using an external SoundBlaster USB... set as default in Fedora 11's new sound device manager ( neat btw )...works great... except no sound in Firefox / Flash Player.
I mainly use debian jessie , recently i have installed daragora as my second os to get a feel of gnu/linux . the problem is that dragora uses bash , and it's commands are different from debian jessie terminal is there a way that i can use the same commands here in dragora?
When I upgraded to Ubuntu 11.04 Natty Narwhal, the Byobu terminal was installed. What are the differences between the Byobu terminal and the default terminal(I mean the terminal that is default in 10.10)? Is it more advantageous to use Byobu?
When I was using Ubuntu to remove stuff left behind after uninstalling programs, like all of the dependency files, you go into your terminal and type sudo apt-get autoremove. That removes all of those files that you no longer needed, its sorta like a "Disk Cleanup" for Linux. How can I do that in Fedora? Is there a command for it in the terminal using YUM?
How do I use my SSH Terminal to get a file that is sittng on another server that I have.. As its like 500 megs or so but to download it to my computer then upload it it takes a long time..
So this is what i have done so far
1. Loged in to SSH Terminal
2. Went to my DIR that i want to put the FILE to
3. Typed in FTP
4. I"M LOST now as i'm trying to connect using my user on my ftp site (DIFFERN"T SERVER)
I relly need the key commands SHH Terminal for dummies
I'm trying to make it possible to see my logfiles on a browser. For instance, I want to browse to [URL] and see a listing of all my logfiles. Because the logfiles reside outside of the web content directory, I'm trying to set up an Alias. Here's how I'm doing it:
Code: Alias /logfiles /path/to/my/logfiles <Directory /path/to/my/logfiles> Order allow,deny Allow from all </Directory> Then I restart apache /etc/init.d/httpd restart
When I browse to [URL] I get a 404. I've been online all morning looking for a solution and all I find is what I've already done. BTW, this is a RHEL 5 on a LAMP stack.
I'm running AntiX (Debian testing and Mepis with IceWM and FluxBox) and I can't change the default web browser (which right now is Dillo). I've checked the config files for Fluxbox and IceWM but I didn't find anything (It could be possible that I missed something).
I'm sure this answer is out there but I cannot find it. I thought there was a command you could put in the terminal to find out what version of Fedora you are running and also tell which architecture (either 32 bit or 64 bit) it is. Does anyone know what that command is?