Yum update
Loaded plugins: refresh-packagekit
Could not retrieve mirrorlist [URL] error was
[Errno 4] IOError: <urlopen error [Errno 111] Connection refused>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora.
Please verify its path and try again
I have had a Dlink 323 network file server for some time. After first getting it going, it has worked fine on both my Ubuntu computers and my Windows machines including a dual boot Ubuntu machine / Vista box. Recently, a problem has appeared that started at about the same time. The Ubuntu machines give me the "Unable to mount location, Failed to retrieve share list from server" error message. The Windows machines still work fine. This message can be caused by a number of problems. I suspect that this time was caused by a update. The linux machines are 11.04 and 10.10.
View 7 Replies View RelatedThis machine has Fedora11 x64 and I am trying to connect to another windows machine. If I go to Places > Network > Windows Network I get "failed to retrieve share list" <no paste!> I saw the bits about nss-mdns which wasn't installed. I have now installed v0.10 and restated everything with no improvement. Admin>network>DNS persists in using the router name as search path not my domain, if that is relevant.
View 9 Replies View RelatedMy network has several machines on it. They are all connected to a single router. Two of the machines are running Windows Vista, one Windows XP and one Fedora 11. When I go to places.network, I see an icon that says Windows Network. If I click on it, I get the message: Unable to mount location, Failed to retrieve share list from server. When I had Ubuntu running on this machine, I had no problem seeing and connecting to the Windows Vista machine.
View 11 Replies View RelatedI'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
I tried to update via software center anddd with 'yum update' but it won't work for me, I get: Loaded plugins: langpacks, presto, refresh-packagekit ...
Error: Cannot retrieve repository metadata (repomd.xml) for repository: spotify. Please verify its path and try again.
Any way which would allow me to edit something to make the paths right or to even remove the spotify.
recently ran into another issue (for those who haven't seen it, I'm having an issue setting up my wireless on Linux...) which is that when I run the yum update command in the Terminal I get this output:
Loaded plugins: presto, refresh-packagekit
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
I've made a terrible mistake that I changed files in /etc/yum.repo.d and /etc/yum.conf.Now I can't get update by yum update, saying that ERROR: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again. Now I'd like to reset everything to default.What can I do now?
View 8 Replies View RelatedSo many similar problems but not quite..
Fedora 11 server sharing on WINDOWS LAN
Linux machine displays icons for the Network and Workgroup Try to open Workgroup and get error "UNABLE TO MOUNT - FAILED TO RETRIEVE SHARE LIST FROM SERVER" What "share list" is it searching for?
SELinux and firewall turned off Have both Linux and Samba users entered
(part of SMB.conf}
[global]
netbios name = LE
server string = linux file server
workgroup = PRODUCTION
security = share
[Code].....
I'm running Fedora 14 and when I'm surfing the web, it seems to lag in between pages. I don't think its my net connection, I just wiped windows 7 off my system for Fedora and it did not suffer from the same lag issues.I've tried adding in google's alternate dns server 8.8.8.8 but it didn't seem to fix the issue. I ran into this issue a couple years back on Ubuntu 8.1 or something like that, and I never could find out what I needed to configure.My second problem is that when I try to connect to other Windows systems on my wlan or wired connection, it gives the error "failed to retrieve share list from server". I'm not experienced in networking, can someone explain this to me?
View 1 Replies View RelatedI am from India, and I tried to update my Ubuntu system today. Code: $sudo apt-get update The update failed because the connection to the India mirror timed out: Code: [URL] Could not connect to in.archive.ubuntu.com:80 (111.91.91.37). - connect (110: Connection timed out) I tried the update a few times, with the same result every time.
I had firestarter running at this time, and noticed that I would get new security events every time I tried an update. I checked the events list, and it turned out that the machine at the ip address 111.91.91.37 (the in.archive.ubuntu.com machine, to go by the above error message) had been trying to make connections to seemingly random ports on the machine every time I tried the update: see the attached screenshot. I then changed my repositories to the Main Server using Synaptic, and tried the update again (from the command-line). This time it worked without a hitch, and firestarter did not report any unwanted incoming connection. why is the India mirror trying to open connections that the Main server apparently does not need in order for me to do the update? Should I (we) be concerned?
I was puzzling over the nss dependence problem that people are having in upgrading 5.2 to 5.3. The issue is clear (that the mirror people are using for [updates] is not pointing to the latest set when an uptodate mirror may be being used for your [base]). My question is though how the mirror list decides whether a mirror is fresh. According to [URL] then this mirror [URL] is "green" which presumably means that the system thinks it is up to date (last probe was 1 hour ago). However if you look at the files on the mirror now (12:54 BST, Apr 1 2009) you see that the date of the 5/ branch is 24-Jun-2008. Thus this host is not ready to give you updates to 5.3. Is this a bug?
View 2 Replies View RelatedThe last complete update failed on one package (Cups Common - 1.0 mb), each time I login the update is offered via update manager and each time it fails with this message:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...ntu3.6_all.deb
Connection failed [IP: 91.189.88.31 80]
can anyone shed light on this - (I'm running 9.04 Jaunty)
post the correct setup for apt-get sources.list for the hong kong mirror
View 1 Replies View RelatedI am having to reinstall ubuntu because of my silly mistake. Anyway, my questions is, when booting from live cd, how would I get the terminal to print out what I have listed on my actual hard drive? I know this works if I am logged into my actual Ubuntu hard drive, but I can't do that: dpkg --get-selections > installed-software.I am trying to get a list of installed packages because I can't actually boot into my current ubuntu hard drive
View 2 Replies View RelatedI loaded 9.10 version on a test pc. Immediately after the installation and reboot, all of the windows PC's and NAS drives I have (13) showed up under network in Ubuntu. I then proceeded to assign static addressing and loaded updates, Then I couldn't see the windows machines anymore. And this was BEFORE I started modifying the smb.conf file. My Windows workgroup name is not "workgroup". It's odd that all the Win PC's and NAS drives were visible from the out of the box 9.10 install....
View 1 Replies View RelatedWeird. I connect Windows to Ubuntu Server but not Ubuntu to server. I am able to connect my two windows (7 and vista) to Samba/UbuntuServer and browse, cut, paste, etc. However, I can't for the life of me connect with my Ubuntu machines. I get to the stage: "Opening Workgroup" and then I get unable to mount location. Failed to retrieve share list from server.
View 9 Replies View RelatedMy flatmates just set up a windows server to share media. If I use nautilus, I can see something called "Windows Network". But if I click on it, or try to open it, I get the error message: "Failed to retrieve share list from server". I have nautilus-share and smb installed. How do I now actually connect to a windows shared folder?
View 1 Replies View RelatedTrying to share files between Ubuntu 10.04 machines has become a continuing nightmare; it has been going on ever since the launch of 10.04.
I have worked my way through every post and howto I can find in this forum, but without success.
I have 3 machines in my home network; 2 are on wired connections and one on wireless. Each machine dual boots Ubuntu 10.04 and Win XP.
When all machines are in XP, everything is fine. When all machines are in Ubuntu, the reverse is the case. On some I can see the other machines; on others I can only see "Windows network". In all cases, clicking on any of the icons that emerge from Places>Network, I get the "failed to mount....failed to retrieve share list from server."
Along the way, I have changed /etc/samba/smb.conf so often that I have now done a clean reinstall of Ubuntu on each machine and a clean installation of Samba. The problem remains.
I have a few specific questions, the answers to which might just lead me in new directions
1. In the smb.conf file, should the "Netbios name" entry be the name of the machine itself or the name of the Ubuntu machine that you wish to be the server.?
2. Should there be a different entry for WINS support yes/no for server and clients?
3. Many of the howtos take you to /etc/init.d/samba to start and stop samba; but that folder is not present on any of my installations. Is that OK? Do those instructions only apply to earlier versions?
4 I am totally at a loss over the WINS server entry, and what w,x,y,z are meant to be replaced with
I want to install my printers onto this laptop. Both (2 laserjets-named "hplj2200" and "BrotherHL3040color")are "locally connected" via USB to a PC in another room (winxp pro) windows network is "workgroup" PC with printers attached is "philmainpc". Places>Network instantly sees WINDOWS NETWORK, click > WORKGROUP click> opening network> Unable to mount location Failed to retrieve share list. System>Admni>Printing>ADD>Network Printer>Windows Printer via Samba>Browse> workgroup philmainpc Doubleclick, wait for awhile and then nothing. I have tried manually typing in smb box "workgroup/philmainpc/"shared name of printer" and again nothing. In synaptic manager I added smbfs etc.
View 7 Replies View RelatedWhen i open my network all my computers and other terms show up but when i click on them all i get is cannot mount failed to retrieve share list from server im running ubuntu 10.10 and gnome i thought i had samba4 all installed what else could i be missing.
View 1 Replies View RelatedI am running Ubuntu 9.10 on VMware Player and wish to access my Windows files inside Ubuntu. When I go to Place -> Network there exists a folder called Windows Network. When I try to open it I get the message: Unable to mount location: Failed to retrieve share list from server
View 1 Replies View RelatedA few days ago I got this Ubuntu box (9.10) to connect to the Windows network in our house. Sharing printers and files. Life was good. But today, Places > Network > Workgroup tries to connect for about a minute then I get a "Unable to mount locations, Failed to retrieve share list from server" error. The only thing I recall changing at around the same time was adding Wine.
View 6 Replies View RelatedI have been using Ubuntu sense about 6.10 and never had to network with a Windows computer before. I have a decent understanding of Linux itself but I am having issues with this samba client. I have a clean install of Ubuntu 9.10 and am trying to use samba to access my shares on a Windows XP(SP3) computer. I am on the network just fine, and all the computers on the network have static IP addresses. When I go to Places->Network->Windows Network I see the "TITANNET" workgroup, (Even before I changed my workgroup to "TITANNET" in the smb.conf file.), but when I try to access it I get this error:
Code:
Unable to mount location
Failed to retrieve share list from server.
P.S.[0] I tried using /etc/init.d/samba restart but it did not work, I am not sure I am even running the samba server. (Well, it is obvious I am not, what I really mean is what am I running to (not =D)access the shares on my Windows PC.)
P.S.[1] I know that this has probably been posted before. I have searched and searched, I am about 1.5 pots of coffee and 4 hours into this.
I have recently put Ubuntu 10.04 LTS on a lab computer for use as a file server, but I cannot seem to get our Windows computers to see the Ubuntu share or vise versa.
I right clicked the folder, said share, and did the samba install.I edited the samba smb.conf file per the discussions here, I edited the nsswitch.conf file per the discussion here, I installed winbind, I disabled the firewall, and I rebooted and tried tearing down the share and re-sharing. Nothing seems to work. When I try to access the folders on the windows computers, I get "Failed to retrieve share list from server". When I try to access the ubuntu machine from Windows I get nothing. I have done a ping from each machine to the other and they have no trouble. As far as I know there are no firewalls between the two computers as the Windows computers can see each other's shares just fine and I've never had issues with ports getting blocked with any of our experiments.
The workgroup for all of the Windows machines is UEDA_LAB and I made that change in smb.conf as well as putting the computer name love218-legolas.
I have attached my smb.conf and nsswitch.conf files.
My main goal is to get the ubuntu folder seen by the Windows computers (for read/write/etc) so that it can be used as a file server.
My network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop. All was well.
I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message:
Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
I keep getting this, ever time I try to map a shared drive on other systems with my small network. 'unable to mount location failed to retrieve list from server'. This used to work.
Main System UNBUNTU 10.10, GNOME ver. 2.32
Sys2 Windows XP Pro, SP3
Sys3 Windows XP Home SP3
[code]....
Mine is used as a server for the above, and also for me to work on. For some reason, I keep getting permission failure. Setting up a share on sys2. sys3, sys4, sys5 can see and read it. My main sys cannot. None of the systems can see the Main one & the main one cannot read any of the others.
Chain ufw-after-forward (1 references)
target prot opt source destination
Chain ufw-after-input (1 references)
[code]....
My network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop.
THE REASON:I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
THE PROBLEM: After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message: Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
It seems this is a common problem. I used Samba to configure and connect the computer running Ubuntu 11.04 with my Windows Visa workgroup. This is a wired, not wireless, connection.
In Ubuntu, under Network, I can see the name of the other computer (NOVA_MORAI), but when I click, I get the error:
Unable to mount location - Failed to retrieve share list from server
I tried the nmblookup command, here is the output:
eleos@Planet-Morai:~$ nmblookup NOVA_MORAI
querying NOVA_MORAI on 192.168.1.255
192.168.1.2 NOVA_MORAI<00>
And:
eleos@Planet-Morai:~$ nmblookup -A 192.168.1.2
[Code]....
There it it. But when I try the findsmb command, it does not show up.
The error message seems common, but I have been trying solutions all day, and I am still not getting a connection.
I have a Buffalo Link Station NAS. I can connect to the NAS via my browser and set up users and groups, but I can't get contact through Network.
If I open Shortcuts and select a folder, the Network icon shows in the left pane. Clicking Network opens the folder and Windows Network icon shows.
When I click on the icon, eventually, this message appears - Unable to mount location- Failed to retrieve share list from server
I did have this unit working some time ago under Ubuntu, and then we changed IP to Virgin and have a new cable router.