Ubuntu :: Root Can't Change Permissions?
Aug 4, 2011
how to use permissions. I ran into a weird problem in which I am unable to change permissions as root. I have a file I've been testing commands on, and somewhere along the line I think I gave it zero permissions. Now I'd like to restore some permissions, but can't. Here's what I'm looking at:
Code:
jeremy@jeremy-laptop:~/test$ ls -l
total 16
-rw-r--r-- 1 jeremy jeremy 235 2011-05-17 13:15 onelink
-rwxr-xr-x 1 jeremy jeremy 27 2011-08-02 18:05 threecopy
-rwxr-xr-x 1 jeremy jeremy 27 2011-05-09 17:10 three.txt
[Code]....
View 5 Replies
ADVERTISEMENT
Aug 10, 2011
Accidentally I changed the ownership of all the directories under / to my own instead of root:root. Now I am unable to use sudo and many bad things are happening. Is there a way to revert the changes or change the permissions again to root:root or make sudo work ?
View 3 Replies
View Related
Jul 11, 2011
I'm very new to Linux, i'm running Ubuntu and i'm trying to install a program. In the instructions it says "Check that you ARE NOT root, never run similar tools as root! just change file permissions". How do i check if i'm root or what am I supposed to do here?
View 7 Replies
View Related
Jul 24, 2010
after a fresh install of fedora 13 I was expecting a few niggles and here's one, I've googled and read man chmod and chown and there seems to be plenty of conflicting advice, oh yeah the problem, I installed a package called get_iplayer (allows downloading of bbc iplayer content) via yum, only thing is I can only run it as root whereas in f12 I could as a normal user. It's probably the simplest command to change permissions, also I can't find any info on what the different numbers mean (775 777 etc)
View 11 Replies
View Related
Jun 14, 2010
I need to change the config in a folder and can not due to it being owned by root. How do I change the permissions.
Folder = /etc/stunnel/
file = /etc/stunnel/stunnel.conf
View 4 Replies
View Related
Aug 30, 2010
I have been VERY lucky and managed to restore from a formatted ext3 /home/ partition. I used testdisk to reset the original partition which had had nothing done to it since formatting(!). However some of the file permissions are a altered and I cannot change them. I have tried "su chmod" and even temporarily enabled the root account itself and tried to alter the ownership/permissions from root 'proper' without it helping.
Here is an example of the output of ls -l
drwxr-xr-x 2 martyn martyn 4096 (date) (time) sponsors
?-----S--T 63231 92820383 44090688 4286824785 (date) (time) order.xls
The first line looks like a normally formed output and indeed is readable. The second line looks corrupted and I don't have a clue how I can reclaim this - or even if it is possible. Should I count my blessings most of my files are intact and leave those be?
View 2 Replies
View Related
Oct 29, 2009
Get Fedora 11 and Apache installed. Open web browser and enter http://localhost and I get a "Fedora Test Page" that shows Apache is working (according to the info on the page). It says to put my web documents in /var/www/html/ ... however, as a user I cannot access it (put anything there) and I can't change the permissions (belongs to root) I'd like to run this as an intranet web server in our small ( <100 users) company.
View 6 Replies
View Related
Sep 25, 2010
I just wanted to set some file permissions right. As root:
Code:
# chown -R kikinovak:users /home/kikinovak/Documents
But all I get is a series of "Operation not permitted" errors. What's going on here? I tried this:
Code:
# find /home/kikinovak/Documents -type d -exec chmod 0755 {} ;
... with the same strange errors.
View 3 Replies
View Related
Mar 23, 2011
I was unable to change the permissions for root node and for other users also. WE have tried all the possibilities like chmod and chmod -R 777 filenem. But we are unable to change that.
View 4 Replies
View Related
Jun 16, 2010
How to enable Root login...i cant copy or move something on the HDD...I have administrator rights and password for root but i cant change permissions for the HDD without login on root and root login are not allowed .
View 10 Replies
View Related
Oct 16, 2010
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies
View Related
Feb 21, 2010
I'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
View 3 Replies
View Related
Sep 1, 2011
If this information excists here so sorry I was not able to find it. How to change permissions in Unbuntu for those people who are trying to change persmissions in a subdirectory.
Open the terminal and then type: Quote: sudo chmod yourpermission number /thenameofyourdirectory
Example:
Quote: sudo chmod 755 /directory
View 3 Replies
View Related
Aug 11, 2010
How do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies
View Related
Apr 20, 2010
A bit of an oddity that I've recently run into with my storage folder in my system; it's a newly installed drive that I've set to mount at /storage. When I first tried to use it, programs that I used that attempted to write to it tossed Access Denied errors at me in their own way. Checking the permissions (at the Terminal, ls -l / | grep storage) showed that /storage was set to 'rwxrwxr--'--Owner and Group were given full read/write/execute, but Others could only read. However, my logon to my system is a member of group root. Why, then, with the above bits set, would I not be able to write to it? Changing Others permissions to rwx (and presumably rw would have worked out for me since I don't leave anything executable there) allowed me to write to it, but I don't understand why that would have been necessary. So far as I'm aware, the prior drive that was in my system--mounted at the same location--did not need this treatment.
View 7 Replies
View Related
Feb 11, 2011
I need to add some files in /usr/local/include but the folder properties says "you are not the owner"
I guess I have to be root to perform it. now how do I get root permissions to copy files to that folder using Nautilus? using the terminal would be a bit of messy..
View 2 Replies
View Related
Jun 28, 2011
I created a chroot jail in /SECURITY/Jail. But when I used the command 'sudo chroot /SECURITY/Jail' to enter the fake root, I got an error message likegroups: cannot find name for group ID 105groups: cannot find name for group ID 119.
View 1 Replies
View Related
Sep 1, 2010
How would I change the permissions for a specific program(xsane)? For some reason Xsane only works now if I run as root. It was working fine before the latest kernel update, now I get "cannot start scanner: invalid argument" unless I run the program as root. Also images that are scanned are nor accessible unless I am root
Epson Stylus NX215
Ubuntu 10.04 64 bit
The printing feature works fine still.
Iscan is installed from avasys.jp
Rolled back to old kernel and problem still exists
View 7 Replies
View Related
Nov 27, 2010
I use netbeanse as a development suite, but to edit/save file correctly it should run with root permissions. When I do run file or debug them, it launches firefox, but due netbeans have been opened by root user, it tries to open firefox as root also, and it seems to be something that should not do. Either I now upgraded to ubuntu 9.10 karmic koala and sudo firefox does not work anymore, giving me no errors even from CLI.
View 1 Replies
View Related
Jun 5, 2010
How do I add root permissions to my user account?
I want full permissions for all computers in my house, without having to get up and go to the other room and change permissions for the file, then go back to the other room again.
I just created a partition, as THIS user, THIS machine, rebooted, and cannot create a folder on the partition I just created. UGH. No more of this stuff...
View 4 Replies
View Related
Jan 31, 2011
Now I know that in order to change the colors in your terminal you have to play around with ~/.bashrc But the effects don't stay in place after a change-root is taken affect. It just reverts to black. Is there any way I can change that too in .bashrc?
View 3 Replies
View Related
Jan 29, 2010
Okay so my iPod auto mounts correctly to /media/IPOD (out of the box). But the permissions are set to root leaving me with no write permissions for syncing. Obviously it works if I sudo rhythmbox and then sync, but it's too much of a hassle and not very optimal (having to re-add the songs you want to sync etc).
So...How do I make my iPod mount with permissions allowing me to read & write? Previously (in 8.10 Intrepid Ibex) it used to auto mount with correct permissions.
Some info that might be worth brining up: This all started after I got my iPod back from Apple Store for repairs. I noticed they had updated the firmware and formated it to HFS+, I told them I wanted it changed to FAT32 and got it changed rather quickly. Is it possible they f'd something up when formatting? If so, how do I correct it?
View 9 Replies
View Related
Jan 9, 2010
I installed ubuntu on my MacBook Pro, and now I get the infamous "still waiting for root device" when booting mac os x. I couldn't find any solutions that worked (macbook pros don't have a BIOS, or any drives that are easily removable). Anyway, so I have ubuntu working, and I need some files from OS X before I would consider reinstalling, etc. So I mounted the drive, went to users, etc. and it says that "I don't have the permissions necessary to view the contents of ****".
I did chmod 777 /media/os x/Users/* but that led to "Could not access: No such file or directory" (there's a space between os and x, I think it counts it as two commands or something and I can't rename the drive). Any way to give myself the permissions to access my files, or maybe just to copy over the whole hard drive to my main computer, or maybe somehow solve the "still waiting for root device".
View 2 Replies
View Related
Jul 20, 2010
Is there a way to revert to default permissions using chmod, for root filesystem? As root I accidentally chmod'd / to 755, luckily this is a dev server and not production so its not critical to fix for me, just wondering though....
View 2 Replies
View Related
Oct 20, 2010
I am using Lubuntu 10.10 and have installed my application that I need. What I need is a link to the desktop that will execute the program from the /usr/share/test directory. When I execute the program I need to use "Sudo" in order to run in. how would I add a symbolic link the desktop with the appropriate permission to run the executable without compromising security. I tried everything but cannot get it to execute under ubuntu:
PHP Code:
[code]....
View 2 Replies
View Related
Jan 26, 2011
I want to have two kind of users in a work machine having ubuntu 10.04,
1) He is the admin, have sudo privilages and install, do all types of work, his username is abhilash
2) A user who is normally a IT administrator, who can just install or remove softwares, but cannot access files of abhilash.
I'm trying to do this and my head is going blank, The problem where i'm stuck is, if IT admin can install softwares, then he can become sudo as sudo su, then he can view my files
So here is a small test i did, first with abhilash.
Code:
Now others and group don't have any permissions! But when IT Administrator becomes root, he can see this file
Code:
View 5 Replies
View Related
Apr 17, 2010
I cannot change things in files because I get, you do not have permission, you are not the owner. Root is the owner, so how can I get permission ?
View 4 Replies
View Related
Jul 12, 2010
I've got some troubles when I try to install Vim on Linux while I don't have a root account. The error information is shown below: How can I solve this? Can I install it in another directory other than /usr/local/bin/vim?
View 2 Replies
View Related
Jun 8, 2010
New to Linux, want to tinker around but cannot figure out how to get root permissions to my login, or login as root (can do this in terminal, but that is not much help for the rest of the environment I am working in!).
View 19 Replies
View Related
Jun 5, 2010
How do I add root permissions to my user account?
I want full permissions for all computers in my house, without having to get up and go to the other room and change permissions for the file, folder, drive, directory, computer, etc., then go back to the other room again.
I just created a partition, as THIS user, THIS machine, rebooted, and cannot create a folder on the partition I just created. UGH. No more of this stuff... I guess at the very least, I'll still have to log onto each machine for this?
View 12 Replies
View Related
