I was wondering... if I can "/etc/rc.d/init.d/NetworkManager stop" then, /sbin/service network restart, ifup wlan0. with out using /etc/rc.d/init.d/NetworkManager which other command I can use to get the AP around my place?
View 5 RepliesI need to start DHCP after booting into run level 1.
So i am going to ....
ifconfig eth1 up
what is the command to start DHCP service?
Is there an easy way (or even a hard way) to activate wireless network capability from the command prompt? I want to do this because I like to use the fvwm window manager, but I also like wireless! (In fvwm wireless networking doesn't start up automatically.)
I tried just starting the wireless by...
Code:
Despite the promising messages, wireless didn't work.
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons)
- I'm using Fedora 13 with KDE and Gnome some specs:
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Kernel driver in use: iwl3945 Kernel modules: iwl3945
[Code]...
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
View 1 Replies View RelatedI am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
I installed 8.04.3 Ubuntu into a used laptop for a friend, it was an ex business model HP I think, it installed well and wireless was no problem, if the ethernet cable was not plugged in, I could see the wireless signal indicator, it seemed to be there automatically and I could see the available networks displayed.The user has now apparently been using it a lot on ethernet cable for a month or two and wants to begin occasionally to use wireless. She says her daughter gets wireless ok in the house on visits, so I guess that the wifi is always on and available from the (BT, UK) home hub device in the house.
The user is reasonably adventurous, and it is possible that her exploration into a new machine and a new (to her) Ubuntu from previous windows use, she may have inadvertently clicked something and turned off wifi?The user is reporting that without the ethernet cable plugged in, there is no sign of wireless being recognisedA right click on the top panel network icon shows that there is 'no network available' (X sign) and a menu item exists for 'Edit Wireless networks'I have little or no experience about wifi use, so I would be grateful for comments on how I can guide the user to elegantly make use of either wifi or cabled connection
Ubuntu 9.10
Acer 7736
This machine has a combined key/indicator light to turn the wireless networking on/off The change of state of the switch is detected by software with the switch off iwconfig shows
[Code]...
I have a SSH box which is command line only and no X, this will be used remote and i'm trying to get the wireless network configured to start at boot. I'm using wpa_supplicant as the access point is secure with WPA2 At present if I send the following commands the machine will connect to the wifi and be reachable via ssh
ifup wlan0
/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -D wext -dd -i wlan0 -B
dhclient wlan0
This does not start at boot but requires manual input of the above commands. I've just come to a complete blank on geting this to start at boot time. Also I would like to set a fixed IP for this box.
Yesterday i finally got around to installing my graphics card (NVIDIA GeForce 8400M CS) on fedora 12 by using the command yum install kmod-nvidia the terminal then told me that it installed correctly so i rebooted my system. Now when i boot up into fedora, it loads and when the sign in window is about to appear instead my screen shows random colors all over the place. I am hoping someone can tell me how to remove this via the command line prior to actually starting fedora.
View 2 Replies View RelatedI want to connect my modem straight to my fedora 13 box, using it as a firewall, and I want to use my wireless card to set up an ad-hoc to give internet to the windows computers in my house. My router has been messing up and I am trying to create a quick fix until I can solve the problem.
My eth0 has internet connectivity but when I use the brctl command to try to create a bridge it doesn't let me add my wireless card, wlan0, and also I lose internet while my eth0 is in a bridge. I am fairly new to Linux.
I have an older laptop on which I have installed Fedora Core 10 (2.6.27.5-117.fc10.i686). I am using a Retail Plus Mini Wireless USB Adapter. I have scanned this forum and someone mentioned that support for this adapter should come "out of the box" for FC10. I have a fair amount of experience with Linux command line configuration but am by no means an expert. I have absolutely no experience, however, with wireless.
NB that via iwconfig I get the output below which is giving information about my (currently for now unencrypted) SSID called "activity_logged". Pardon my ignorance but wouldn't this mean that I have wireless enabled and if so how does one access it through the command line? I would also eventually like to go back to encrypted status and access that via command line.
[Code]...
I set up 11.4 in my laptopnd, after updating and downloading the proper firmwareeverytihing runs great. I already configured the wireless network via the standard NetworkManager but the connection never starts automatically. When I boot up it reports all the wireless connections available and also let me connect to hidden networks (mine is not broadcasting so I have to use this option). I had to reconfigure my network options the first time I selected Hidden Networks but it connects fine. Please note I had already selected the "Automatic connection" optionSo the only question is how I configure my equipment so it connects automatically to the already configured network
View 3 Replies View RelatedI just have installed FC 10 on a box that I will use as a router/firewall box. On the box I have three interfaces (eth0, eth0.704 (VLAN), and eth1). When the machine boots up, only eth0 and eth1 come up. If I run /etc/init.d/network restart, then eth0.704 will come up. If I add that command to rc.local, then all interfaces come up at boot.
I have the directive ONBOOT=yes in ifcfg-eth0.704. What would cause this vlan interface not to start at boot on the machine?
I would like to mount a bunch of folders/shares when I start my machine up. I will be adding the mounts into my /etc/fstab folder BUT my WLAN0 only comes "up" and connects to my WAP AFTER logging in.
how I get it to start on PC boot instead of log in?
I think I need to disable network manager but I'm unfamiliar with the procedure in Fedora
I have a LG S1 PRO, that to activate the wireless is necessary Fn + F6. How do I enable wireless on command? Since you can not activate in ubuntu with these keys.
View 9 Replies View RelatedI have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
View 2 Replies View RelatedI want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
I'm trying to find a command or application that will tell me what drivers my wifi card is using.
I've been googling for a while now and all I get in return for any query I try are articles about folks having wifi troubles.
The Ubuntu install works fine but my Windows install seems incapable of connecting. I've recently realised that I think it all started when I installed 10.04. I think 10.04 might have rewritten the firmware on the wifi module and now Windows can't connect. I'm not sure if this is possible but it is the only solution I can come up with considering that I've now tried 2 different version of Windows and they both have the same problem.
Anyway anyone know of a command or app I can use to discover which driver my card is using at the moment so that I can begin my investigations.
My wireless is stuck off, i put the command rfkill list and it says
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
[code]...
So i was wondering if anyone can help me connect to a wireless network via command line instead of utilizing the GUI
so far i have done this, but im not sure what to do after this
Nexus:~ # ifconfig wlan0 down
Nexus:~ # ifconfig wlan0 up
Nexus:~ # iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[Code]...
I have a Fedora 11 PC, which I want to connect to the ldap server at my organisation. When my /etc/ldap.conf file is in place, the machine will not boot past "starting system messagebus" and just hangs there. I have to press the reset button, and boot it into single user mode, and remove /etc/ldap.conf, and only then will it boot. The ldap.conf file is fine, I think, because if you boot the machine up without ldap.conf, then log in.
I can put ldap.conf in place and immediately I can see all the user accounts etc. from the ldap server. If I then reboot, with ldap.conf in place, it hangs on boot again. I found a bug report for FC5 which stated this problem, but there was no solution. There was a workaround, making messagebus starting later in the boot process (move it from S22 to S27 in rc3/5.d), but that didn't help in my case.
My ldap.conf contains this (I've removed my actual ldap info):
host my.server.ip.addr
base dc=my,dc=dn
uri ldap://ldap.mydomain.com
ssl no
tls_cacertdir /etc/openldap/cacerts
pam_password md5
bind_policy soft
As I say, I think the ldap config is fine, because you can start it manually once the machine has booted up without an ldap.conf in place. I lifted it from a Centos client, which works fine and doesn't have the same problem with booting that Fedora does.
Without Gdm (The GUI Desktop running), or an Internet connection, how does One get pppd or wvdial to connect to a wireless broadband modem?I'm SURE this can be done with any modern Distro without additional downloads...but seem to be missing some crucial step...? I've been trying things like: (scrips for pppd and chat and ln {links} ttyACM0 to /dev/modem?) the modem is definitely on ttyACM0.
ln -sf /dev/ttyACM0 /dev/modem
/etc/ppp/chat-script
#!/bin/sh
[code]....
The title about says it! I have a major problem on my laptop after installing updates. Some of my icons in the top panel are broken. So as a first step I need to reinstall a few things. The first step is to start the wireless connection from the terminal. So would someone please tell what the command is?
View 2 Replies View RelatedI've been familiarizing myself with the command line and am attempting to connect to a wireless network but am getting stuck at the point wherein I need to put in a password.When I run iwconfig I see my card is wlan0.I definitely know my password as I can connect using a GUI. The encryption method for my network is WPA2.Could someone tell me how I could connect to a WPA2 secured network via a command line, and/or where I went wrong with what I've been trying?
View 1 Replies View RelatedI wanted to run a little media server in my house, shared with my laptop only, so I could free up space on my laptop drive. I took one of my Linux boxes out of my render farm and loaded up a minimal install, command line only of Ubuntu Lucid from the mini ISO (32 bit). I had to plug in a lan cable to install, but I wanted to move my box back out to the "farm" that doesn't have wired access to my intranet.
After much research, trial and error, this is what worked for me. My wireless card uses an Atheros AR5001X+ chip, and it works with the desktop cd out of the box. I found the "just works" desktop install uses the ath5k driver that is now included in Lucid, but I'm not using a desktop or window manager. I haven't tried this on server version, if you do, let others know what you had to install to get it to work.
The things I do tell you about, I instruct you as if you are a newbie, however I have left out some things that users should know or be able to lookup easily, like if you want a static address instead of using dhcp. You may not need all of the steps or you may have to do more research and troubleshooting.
Find your wireless card (you may need to lookup what to do if it is not recognized at all)List all pci devices, only show network devices (-v verbose, -vv very verbose): >>lspci -vv | grep Network List all hardware (| less lets you pause at each page - arrow keys, page down/up to navigate, q to quit) >>lshw | less
[Code]...
connect to a hidden wireless network from command prompt? The networks ESSID is "sh0mis"
View 5 Replies View RelatedI did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
View 1 Replies View RelatedI've been having issues setting up the wireless interface on my Ubuntu server (command-line only, no GUI) and I can't seem to get it working. It seems as though the card is recognized, the drivers are installed and the interface is up, but it fails to connect. I have no idea where I'm going wrong. I have WPA and a MAC filtering setup on my wireless router. An exception has been made for this PC's MAC address and I've manually entered the connection details into /etc/network/interfaces.
[Code]...