I have a server with slackware 12 and i try to block 2 web sites but without success. I write in iptables rules /etc/iptables.conf
iptables -A INPUT -s web.org -j DROP
iptables -A OUTPUT -d web.org -j DROP
but no effect. What rule i must write to block url`s?
in my office i have to block all messenger like yahoo messenger, windows live messenger, i have to block websites like www.yahoo.com, some more web sites. i need guidance through which i can accomplish this task through ip tables or through squid server. i can use squid but i had heard that squid blocks pop and smtp also. squid creates some problem in receiving and sending email. i am using red hat linux 4 box and installed squid having two ethernet card 1 is connected to adsl line and 2 is connected to switch. all clients will have proxy address of this linux box. guys need ur help ASAP.
View 2 Replies View RelatedJust wondering if it is possible to block web access on a certain ip address with iptables.
Iv seen guides for blocking web traffic on a whole network but i want to just block a single host from accessing the web.
I'm deploying new ubuntu server which should act as a router. I've already set up the NAT for local network, and also did some shaping for different groups of users, but now I'm facing new problem.I need to make a scheduled URL filter. I know it's not a problem with cron and simple script, but maybe there is existing way to do that? And also, I need to make statistics on web-traffic. I need to have list of URLs visited by users (source ip, destination url). Is it possible with iptables? or with any other software but without using proxy servers.
View 9 Replies View RelatedI want to use iptables to automatically block all IP addresses who send UDP packets with length 11 more than 3 times per 10 seconds.
View 1 Replies View RelatedI have the requirement that if our website receives 20 or more requests within 60 seconds, to block the offending IP address for 5 minutes, then allow them access again. My only certain mechanism to do this is iptables. I wrote the following series of commands:
iptables -N RATE_CHECK
iptables -N DOSAttack
iptables -N RemoveBlock
[code]...
I am limited in my testing, but the little I have been able to test seems to be having no effect. will the above commands have the desired effect.
I Need to know how to block this applications using iptables or ROPE scriptable Method..?..
1.Web navigation
2.Electronic mail
3.FTP transfers
4.Video traffic (multicast video stream and unicast video stream)
5.VoIP service
6.Instant Message (MSN and yahoo messenger�etc)
7.Management service (TR-069 and SNMP)
I need to configure iptables to block incoming traffic (except specific ports), but allows all outgoing traffic.
I am able to block incoming traffic, but doing so also prevents outgoing traffic (tested by telnet [URL] 80)
The following was used:
iptables -A INPUT -p tcp --dport ssh -j ACCEPT
iptables -A INPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT 1 -i lo -j ACCEPT
iptables -A INPUT -j DROP
Also, even allowing NOT SYN requests still prevents outgoing traffic.
iptables -I INPUT 1 -p tcp ! --syn -j ACCEPT
Another point:
# modinfo ipt_state
modinfo: could not open /lib/modules/2.6.18-028stab070.14/modules.dep
How to install ipt_state module on ubuntu?
I Need to know how to block this applications using iptables or ROPE scriptable Method..?..
1.Web navigation
2.Electronic mail
3.FTP transfers
4.Video traffic (multicast video stream and unicast video stream)
5.VoIP service
6.Instant Message (MSN and yahoo messenger�etc)
7.Management service (TR-069 and SNMP)
Is this how I would do that?
iptables -A INPUT -p tcp --destination-port 21 -d ! 168.192.1.2 -j DROP
This should block all incoming connections on port 21 from 192.168.1.2, correct? Thus preventing that IP from logging into my FTP.
What i wanted to do was block everything from getting in my pc but still be able to surf the web and still use instant messenger.
View 2 Replies View RelatedI want to block all outgoing traffic with iptables and only allow a few specific websites. I would like to get the code to do so and also to revert the changes in case I want to unblock them.
View 1 Replies View RelatedI have blocked below IP by using iptables command in RedHat Linux 4.0.
Code:
iptables -A INPUT -s 192.168.0.85 -j DROP
It's now totally blocked and can't get access into web or internal network. how I can un-block that IP, so that it can again starts it's normal operation.
Currently I have 2 Lan card in My System one for communicate client pcs (Lan card Ip 192.168.1.100) and other for Internet (Lan card ip 192.168.0.100.) All client pcs are in 192.168.1.0 Subnet Here i implement my system as router through iptables all clients are communicate through only 192.168.1.100 (clients default gateway also 192.168.1.100) Now no problem for forward rules when my system is active all clients are get internet.
Output of iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
Now i want to block some ip address and port ways i tried lot of things in internet when i type iptables -A INPUT -s 192.168.1.150 -j REJECT (i found in internet it will block that ip address for getting internet and any access through my sys)
Now th Output
Chain INPUT (policy ACCEPT)
target prot opt source destination
REJECT all -- 192.168.1.112 anywhere reject-with icmp-port-unreachable
[code]....
it will block icmp protocol only I want to know how block ipaddress and port address ways...
Currently I have 2 Lan card in My System one for communicate client pcs (Lan card Ip 192.168.1.100) and other for Internet (Lan card ip 192.168.0.100.) All client pcs are in 192.168.1.0 Subnet
Here i implement my system as router through iptables all clients are communicate through only 192.168.1.100 (clients default gateway also 192.168.1.100) Now no problem for forward rules when my system is active all clients are get internet.
Now i have problem with blocking UDP protocols i tried lot of things in net iptables -A INPUT -s 192.168.1.0/255.255.255.0 -p UDP -j DROP
But it's not blocking UDP protocols (i change UDP to ICMP Protocols then icmp is blocked every ip address)
My VPS host a mail, blog and web site. So i want to block port i not use. The port that i use is 80,21,2022,443. The other port will be drop. I want to block bad packet and all packet that not related. Can anyone how to write in iptables?
View 2 Replies View RelatedDoes anybody know how to block HotSpotShield in squid or iptables?
View 2 Replies View RelatedI'm using wget to retrieve a long list of URLs, a small proportion of which fail, hence:
Code:
wget --input-file=urls.txt
Is there a way to log the urls that have failed? Unfortunatley wget does not output the current URL being processed (and then the status), so hard to see grepping the output helping.
Or should I use some alternative like curl, wmget?
I try to create some rules to detect an outgoing traffic from my debian jessie that is not from my IP or loop.
#!/bin/bash
/sbin/iptables -N C_OUT_N_LOCAL
/sbin/iptables -N C_OUT_N_LOCAL_LO
/sbin/iptables -A C_OUT_N_LOCAL -m limit --limit 2/min -j LOG --log-prefix "PK: output not local : " --log-level 4
LO_IP="127.0.0.1"
MY_IP="192.168.0.4"
/sbin/iptables -I OUTPUT -p ALL ! -s $LO_IP -j C_OUT_N_LOCAL_LO
/sbin/iptables -A C_OUT_N_LOCAL_LO -p ALL ! -s $MY_IP -j C_OUT_N_LOCAL
I have a Suse 10.3 router with 4 network cards. 1 is to connect to the big network and thereby also the internet, 2 are for 'client' subnets and I want to use the last one as a DMZ. In this DMZ will be a web server which has to be accessible from the other 2 subnets and from the big network. I could do it with a few simple clicks in Yast firewall, but I have some issues with this firewall and there for I want to use it as minimal as possible, using Iptables.
So now I'm struggling a bit with Iptables. Basicly what I'm looking for is how to block all ports but 80 in this last subnet with iptables.
How can I block all ports except
ssh (port 22)
httpd (port 80)
using iptables and iphains?
how to block all ports except pop,pop3,smtp in nat using iptables in squid on redhat A3
View 2 Replies View RelatedI would like to allow incoming and outgoing connections when I'm connected to a wired connection, but drop it otherwise. I noticed that ufw can't block outgoing traffic because of will I give iptables a try. I'm unsure if dropping packages that are outgoing will work, the rule after the block rule will allow all outgoing connections.
This what the rules are intended to do, unsure if that is actually the case. Allow all loopback traffic. Allow ping replys Allow incoming on port 12345 if eth0, deny otherwise. Allow outgoing on port 12346 if eth0, deny otherwise.
Code:
iptables -A FORWARD -j DROP
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -p icmp --icmp-type 0 -s -m state --state ESTABLISHED,RELATED -j ACCEPT
[Code]....
I keep getting hundreds of SSH failed logins per day. Is there a way with iptables, i can say if a user connects too to port 22 over 8 times in 10 minuntes, then block them for an hour?
View 7 Replies View RelatedI run a small home server (Debian 4), which acts as my gateway to the internet (ie, firewall) and runs a web server, dhcp, dns, and acts as a file server to the rest of the machines on my home network. Now I know it's never a smart idea to have all those services running on the same machine that is acting as a firewall, but I don't fancy running multiple servers just for home use, as it's mainly allowing me to learn system administration.
I noticed a few days ago that my internet had become unbearably slow, to the point where I could sometimes not load web pages. I spent a while searching through log files on my gateway, to try and find out what was eating up all of my bandwidth. When I came to apache's access.log file, I was confronted with this:
Code:
204.45.41.82 - - [17/Oct/2010:06:25:10 +0100] "GET http://vewice6.nightmail.ru/marriott-grand-cayma.html HTTP/1.1" 200 36921 "-" "Mozilla/4.0 (compatible; M$
204.45.41.82 - - [17/Oct/2010:06:25:11 +0100] "GET http://malaysiapodcaster.blogspot.com/2006/05/blog-post_11.html HTTP/1.1" 200 58681 "-" "Mozilla/4.0 (com$
[code]........
Multiple requests to my server, for totally random websites. I didn't even know it was possible to make those types of queries to a webserver. The only thing that is on the web server is a browser based torrent client. I have only shown a small snippet of the log file, but there are around 90k lines to different web addresses, from many different IPs. What I want to know, is what is happening? :S Why is someone querying MY web server, for web sites totally unrelated to it? And most of all, how can I stop it. My initial was to try and use iptables to block multiple requests from the same ip within a certain time frame, which I think would work as the server shouldn't really get many queries from external networks.
Over the weekend I upgraded my home PC from Fedora 9 to Fedora 12, and now I'm having problems connecting to the Internet. Basically, I am able to connect to some URLs but not others, and it happens in both Firefox and Konquerer. I am able to connect to url, url, url and url with no problems. However, when I try to connect to slashdot.org, url, fedoraforum.org and rpmfusion.org I can not. All the other Windows PCs in my home using the same 2Wire home portal are able to get to the sites using IE with no problem.
I first suspected a DNS issue, but the "host" command returns a valid IP address for all the URLs that I can not reach. Another symptom is that the following command
Code:
su -c 'rpm -Uvh url. url
(from rpmfusion.org/Configuration/) also doesn't work when entered at the command prompt. However, when I did "host download1.rpmfusion.org" and edited the command to use the IP address returned instead of "download1.rpmfusion.org" it worked. But then, the next time I ran "yum" it failed because it couldn't find the rpmfusion.org URL in the installed repository entries.
After reading some other threads, I tried disabling avahi-daemon, but that had no effect. I also tried examining /var/lib/dhcpd and /var/lib/dhclient, but neither file existed on my system.
I was trying to write IPTABLES script to block the ICMP ping using the below mentioned command in OpenSUSE 11.2 Doing this in VMware.....
iptables -A OUTPUT -o eth0 -p icmp -j DROP
& then I tried to ping the different computer & it didnt allow me to ping.
Then I deleted using the command -
iptables -D OUTPUT -o eth0 -p icmp -j DROP
then I couldnt ping also. Another thing I found is my firefox is not connecting to the internet as well, but before writing the script, I can connect to internet.
I did a "dhclient" & iptables -F....
Is there a way with SED to read this link:
[URL]
and then pull the individual links and list them in order each on a separate line? like...
[URL]
If SED can't do this is there another command or program that will?
I have a PHP script written that is checking a string to see if it contains a link in it (i.e. a URL). I have the following if statement, that uses 3 possible regular expressions to determine if there is a link or not.
Code:
// check if we found a link
// links are denoted by strings that:
// - contain http://
// - contain www.*.*
[Code]....
I'm not convinced yet that writing a shell script to do this is the best course of action. If someone is capable of doing this with a Perl or a Python script that's fine too. If you want to make it super high performance and write it in assembly
Is there any way to embed a URL to an external web page in the text of a tomboy note, in the same way that other notes are linked to? I know I can just pates the URL into the note and have it link out, but when the link is over a hundred characters long (not kidding) then that stops being an option.
View 1 Replies View Related
