I am having fedora 10 running on 64 bit machine. I want to upgrade to fedora 12 using preupgrade.
Now as per my knowledge it downloads all rpms from Internet, i not having that much huge bandwidth me, so that option is not feasible for me.
I am having fedora 12 iso file: Fedora-12-x86_64-DVD.iso
How can i configure preupgrade to use iso file rather then downloading all rpms and download only what is necessary.
After preupgrade downloads install media and reboots to start install, I get a dirty file systems error on /dev/sda2, my / partition.I fsck'd sda1,2,3,4,5,6 (all clean) and rebooted, ran preupgrade again and got same error. No other disks are mounted other than internal SSD.wtf is going on here? ;-)More importantly how does one get around this error? Only half-solution I have found on the net for this problem is to set allowDirty=1 in upgrade.py and recreate install.img. Have no preupgraded before so don't want to take any more risks than necessary.Thanks for any workarounds....---------- Post added at 03:12 PM ---------- Previous post was at 08:31 AM ----------Anyone have ideas here? I'd like to avoid yum upgrading as that looks to entail more pain.Why on earth does Anaconda see my /dev/sda2 on "/" as dirty when fsck reports it as clean
View 1 Replies View Relatedwhen I opened /etc/updatedb.conf it says there in the file that one should make ones own updatedb.local. But how, exactly? Presumably I create /etc/updatedb.local but what do I put into that? With all those $-signs I'm pretty much lost. Could anyone post his/her example of a PRUNE_FS statement or point me to some reference where I can read up on this
View 10 Replies View RelatedI have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies View RelatedI'm trying to set up a framework where people connected to same wifi connection can enter a local site for developing purposes.I want them to be thrown to a local copy (development copy of the site) when they type in www.development.loc in the browser.I don't want to connect the world, only people connected to my wifi.Anyone willing to help by stating what I need to edit to :1. Allow me to access local copy of site that's on computer (located : /var/www/developmentsitename/) using www.development.loc in browser./and2a. What do I edit to create the server accessible by other computers connected to same wifi connection. 2b. If another computer can connect to this site now, can we create a virtual desktop setting in which workers can work as if they have their own partition on the server to work on and upload work onto the development server.
View 2 Replies View RelatedToday I download a fedora beta iso file, then I try to install it following the steps I installed fedora 14. However, the install guide ask me to connect to network, if not , I had to exit installation. I just want to install fedora 15 from my local iso file. What's wrong?
View 3 Replies View RelatedWhen I try to compile some Java code on Ubuntu 10.10 (kernel 2.6+) using make and a Makefile.
I get an error indicating that the make utility cannot execute the java compile command (javac).
The error reads: /bin/bash: line 6: .: /usr/local/jdk1.5.0_18/bin/javac: cannot execute binary file
I am executing make as root. I have enabled permissions on all directories in the path /usr/local/jdk1.5.0_18/bin/javac and on javac itself.
I get this error whether using a jdk installed via ubuntu apt-get, or whether I install the jdk myself. And I get it using either Java 1.5 or 1.6
My machine has an 80386 processor. I notice the make utility is built for i686-pc-linux-gnu
However, I can manually compile using javac.
I can compile calling javac from within a bash script.
I can compile using the java compiler gcj from the command line: gcj --main=HelloWorld HelloWorld.java -o HelloWorld.exe
But I cannot compile java code from the makefile. Any reasons why I might be getting this error?
When I try to install Cinelerra I get this error:
Local file conflict between packages
Two packages provide the same file. This is usually due to mixing packages from different software sources.
Test Transaction Errors: file /usr/bin/mpeg3cat from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3dump from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3toc from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
i am trying to make a script in which i can drag a file (with spaces in file name ) and it will scp the file to another computermy code is
Code:
echo "--------------------------------------------"
echo "drag file now"
[code]....
I want to make a file called file roller for Ubuntu 9.10. The folder has a file called install.sh and some others that are make.
I figure first I need to make a file and then run install.sh to install. But I don't know how to do this.
I am interesting in hearing from anyone who has used preupgrade to upgrade from f13 to f14.
View 14 Replies View RelatedI'm not an early adopter; i prefer to wait and see, and let others suffer the new distro's teething troubles. Finally, I decided to try preupgrade. I was a little astonished to find that it doesn't install itself to any menu, but that's OK. I ran it as root, and went on with what I was doing while it got ready. Eventually it prompted me to reboot and I did.
I'd like to say that everything went fine, and in about an hour, I had a working system with no glitches. Alas, that would be a lie. Not only did it change all my customized system sounds (with no apparent way of getting back what I want; the new sounds aren't selectable.) it replaced my carefully-tweaked fstab with one of its own. This mean that several partitions that I don't want mounted were. Not only that, in some cases right-click and unmount got a message that the partition wasn't mounted, even though I could browse it. I had to open a terminal and manually unmount them, followed by copying back my fstab to keep this from happening again.
While doing this, I learned that the arrow keys on my keyboard don't work right, with the up arrow mapped to screen shot, and the Enter key by the number pad disabled. I'm still working around that one.
Worst was that Firefox wouldn't open. Trying it from a terminal, I learned that it couldn't start XCOM. Weird.
I tried a system update, but the livna issue popped up. By good luck, I knew enough to locate the appropriate file and disable it. Yumex has been spending over four hours, downloading and installing more updates than preupgrade did, by almost 100%.
failure: repodata/3a2a6da78e69f9b2608b1c399561b99073baa86b5454618459 ceecb79d58da09-filelists.sqlite.bz2 from preupgrade-updates: [Errno 256] No more mirrors to try.
I receive this error when I run try to run preupgrade to go from F12 to F13.
It's definitely not an issue with my internet connection, I'm running this from a college campus with a 150mbps connection.
I've tried running it 3 times now, and get this every time. It also gives me the error about not enough space on the boot partition, so I press continue there to move on.
just upgraded fc12 -> fc13 with preupgrade. all seems well except for network manager icon missing from the systemtray and therefor unable to connect to wifi. uninstalled network manager and reinstaled but to no avail. wifi is a bcm4318 airforce one btw, broadcom kernel stuff is loaded but maybe in fc13 its supported in the kernel now?
View 4 Replies View Relatedif I can upgrade my fedora fedora 12 to 14, using preupgrade?
View 1 Replies View RelatedGoing from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
it's possible to use preupgrade to go directly from FC8 to FC11.
Also, I'm wondering if this will allow me to avoid formatting my hard drive or not. I'll have backups ready just in case, but was hoping maybe I could get away with not having to do the old two-step shuffle with all my data.
I went to upgrade my daughters machine that was running F9 using preupgrade-cli after having issues with mirrors timing out it finally completed the first part with the notification install will start once you reboot. so I rebooted the machine and when it rebooted the grub menu came up with the F9 install selected but with an option for the F11 Upgrade I choose the upgrade and it starts and I see the installation screen with the stop watch and all of a sudden the comp restarts now at the grub menu again and there is no option for F11 upgrade so I boot into F9 try to run it again and it throws a bunch of errors about the rpm database... Encountering this before i run
rm -f /var/lib/rpm/__db*
rpm -vv --rebuilddb
yum clean all
but yum just blows errors now and if I run rpm -qa it returns nothing. Is there any recovering from this? or should I back up the home dirs and do a fresh install? this is the output of the rebuild
Code:
D: rebuilding database /var/lib/rpm into /var/lib/rpmrebuilddb.2367
D: creating directory /var/lib/rpmrebuilddb.2367
D: opening old database with dbapi 3
[code].....
I tried a pre-upgrade last night and after downloading 7GB of stuff over night, (don't ask me why it was that much) I rebooted.
Everything looked okay until I got an error message that said that /mnt/sysimage/... (I can't remember exactly what the error message was, sorry) what did not have enough space and needed 19MB more to install the upgrades.
Now, this system quad boots between Fedora, XP, Vista and 7 with grub being the intial boot loader giving me the option of Fedora or the Windows bootloader.
What I don't understand is why the installer (anaconda?) is having a fit about space when I have 8GB RAM and the system partitions are >10GB in size.
I upgraded to fedora 12 from fedora 11 with the preupgrade tool and all went very well at first try. But now I can't seem to get any sound from anything! I'm using KDE (for the past few years ) and my system in running on an ASUS Z91F.
View 2 Replies View RelatedI did have F11 on my laptop all running smoothly and everything which is good. But now I've updated from F11 using the preupgrade tool which for what I could see everything downloaded and installed ok, that was until the reboot after the install had completed after seemingly loading F12 it left me with a black screen with a blinking cursor so after a few more reboots with the same out come I decided to see what the loading was stopping at and this is what it came up with
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [ OK ]
Setting Hostname Fireline.Yuki: [ OK ]
mdadm: No arrays found in config or automatically
[code]....
And it stops loading after "Starting atd: [ OK ]" I am going to try a CD install either tomorrow or the day after then I'll go back to F11 depending if it works or not.
I upgraded to Fedora 10 using preupgrade. It installed fine and everything loaded fine. Unfortunately the mouse would not work so I restarted my laptop. Now Fedora won't load at all the PC just turns on then keeps rebooting itself. I really want to avoid using the recovery disk. How to rectify?
View 1 Replies View RelatedI've just finished upgrading to f12 from f11 using the DVD ISO and all is well - I'm looking for a bit of guidance for a n00b on cleaning-up after an aborted preupgrade.A yum --enablerepo='*' clean all didn't clean-up as much as I'd hoped it would and neither did preupgrade-cli --clean - the latter of which reported that there was nothing to clean.I've upgraded all packages and removed orphans and just have the latest kernel installed.
Here's what I think I need to do:
# ls -l /boot | awk '{print $1 " " $8}'
-rw-r--r--. config-2.6.32.11-105.fc12.i686
-rw-r--r--. config-2.6.32.11-105.fc12.i686.PAE
drwxr-xr-x. efi
-rw-r--r--. elf-memtest86+-4.00
[Code]...
oh, now that i've posted this, i see a related post: Need to clean up failed preupgrade which confirms my thoughts.
I'm not exactly sure that it goes in 'General' but hopefully it'll be alright here Anyways I'm trying to use 'preupgrade' to update my system but it's telling me I don't have enough space on /boot. I've already followed the instructions on the Fedora Wiki for removing unused Kernels and the like to try to free up more space. Here is what I have when I check the space on /boot :
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 198337 71584 126753 37% /boot
Is 126MB not enough? :s
What can I do? Should I be looking to expand the /boot partition's actual size? EDIT: I don't know if it affects anything, but I am running Fedora on an HP Mini 1000 with a 16GB SSD and have about 6.9GBs free overall.
I tried upgrade with dvd media and preupgrade from F12 but in both cases there is anaconda exception. I have dual boot windows xp (/dev/sda1) and F12 (/dev/sda2).
sudo fdisk -l /dev/sda:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa070b627
[Code]...
I know this has been covered a lot but it seems as though there should be a definitive answer and I have yet to find one.How much free space in /boot is required to make preupgrade work? I have 173M, which according to the figures I've seen should be enough, but the preupdate client still complains. Any workarounds? I have already tunefs'ed and deleted old kernels.
View 5 Replies View RelatedI have downloaded all packages and prepared to update my laptop (Lenovo 3000 N200, F10 x86_64) from F10 to F13 via preupgrade. Everything works fine, until I reboot and go into the upgrade process.
The problem is at the screen which configs NetworkManager. It shows only two interfaces, eth0 and wlan0, but I use a 3G dongle to connect to the internet. I tried feeding random values for the fields, but it does not allow to go beyond without configuring NetworkManager first.
can I work around the upgrade process without configuring NetworkManager? ie. can I do that manually after installing the upgrade?
I upgraded this weekend to Fedora 13 using preupgrade-cli and now I can no longer use distcc. Distcc was compiled from source and when I saw it no longer work I reinstalled it but it complains about not finding runexec...
View 2 Replies View Relatedtoday i've tried to PreUpgrade from f12 to f14. In the past i preferred always begin with a fresh install, removing abruptly the preivious one with a CLEAN FRESH installation. (I think it's the best procedure). However i wanted exeperiment with this soution giving it one, two, three N+1 chances. So this is my first up-grade (or "double" upgrade).
My system is
CPU: INTEL P4
RAM 1024 MB
Video: NVidia
O.S. F12
Desktop: GNOME only (removed unused KDE app)
[Code]...
I plan on upgrading my F14 system to F15. Which is better? Using the preupgrade approach or using the F15 DVD and doing update from the DVD?
View 13 Replies View Related