Fedora :: Can't Use Distcc After Upgrade To 13 Using Preupgrade
Sep 28, 2010
I upgraded this weekend to Fedora 13 using preupgrade-cli and now I can no longer use distcc. Distcc was compiled from source and when I saw it no longer work I reinstalled it but it complains about not finding runexec...
I went to upgrade my daughters machine that was running F9 using preupgrade-cli after having issues with mirrors timing out it finally completed the first part with the notification install will start once you reboot. so I rebooted the machine and when it rebooted the grub menu came up with the F9 install selected but with an option for the F11 Upgrade I choose the upgrade and it starts and I see the installation screen with the stop watch and all of a sudden the comp restarts now at the grub menu again and there is no option for F11 upgrade so I boot into F9 try to run it again and it throws a bunch of errors about the rpm database... Encountering this before i run
rm -f /var/lib/rpm/__db* rpm -vv --rebuilddb yum clean all
but yum just blows errors now and if I run rpm -qa it returns nothing. Is there any recovering from this? or should I back up the home dirs and do a fresh install? this is the output of the rebuild
Code:
D: rebuilding database /var/lib/rpm into /var/lib/rpmrebuilddb.2367 D: creating directory /var/lib/rpmrebuilddb.2367 D: opening old database with dbapi 3
today i've tried to PreUpgrade from f12 to f14. In the past i preferred always begin with a fresh install, removing abruptly the preivious one with a CLEAN FRESH installation. (I think it's the best procedure). However i wanted exeperiment with this soution giving it one, two, three N+1 chances. So this is my first up-grade (or "double" upgrade).
My system is CPU: INTEL P4 RAM 1024 MB Video: NVidia O.S. F12 Desktop: GNOME only (removed unused KDE app)
I'm trying to upgrade from Fedora 12 to Fedora 15 using preupgrade, but it seems to crash, I also tried going to Fedora 13 instead, but got similar errors. Here's the output to the command line. Let me know if there are logs anywhere that it would be helpful to provide. I replaced all the urls with "URL" to appease the forum's spam filters.
Code: [yashabk@localhost ~]$ sudo preupgrade Loaded plugins: blacklist, dellsysidplugin2, kernel-module, whiteout No plugin match for: rpm-warm-cache No plugin match for: remove-with-leaves No plugin match for: presto preupgrade-main (mirrorlist)
Just started to use Fedora and version 11 a couple of months ago. Is it safe to use preupgrade to do an upgrade to version 12 or is it better to do a fresh install?
I'm trying to upgrade from F12 to F13 via preupgrade tool.The tool appears to be divided into 5 actions.
(1) Download release info (2) Download installer images (3) Determine wich packages to download (4) Download packages (5) Prepare and test upgrade
The tool has a tip too : "Tip: If you quit right now, your download will continue the next time you run this assistant." Well, after a long night, the tool runs until the almost finish of step 4. Then, the connection goes out, and i decided to continue in the following day. I just closed the tool and shutdown.
In the next day, i restarted preupgrade. But the application restarts from the very beginning of step 1.But, i think, the step 2 is very heavy. The file "install.img" is very very big. Re-download it is not desired.
I want to upgrade my F11 system to F13 using preupgrade-cli. Can I do that directly, or should I first upgrade to F12 and then to F13?
I have read elsewhere that Anaconda can skip one but not two versions, is that correct? If so, I assume that moving directly from F11 to F13 is OK, right?
I've run the preupgrade twice and both times I'm told that everything is perfect, all I have to do is reboot. When I reboot, nothing happens. Theory: I'm using Fedora with Ubuntu and GRUB2. I never allowed Fedora to install GRUB. I'm guessing that the preupgrade would normally alter GRUB so that I could continue the upgrade process. However, GRUB isn't there.
-> retrieve install image, ok -> examine storage (or similar), ok -> transfer install image to disk, ok -> dependency check in install packages, ok -> start installation process, ok -> preparing to install
=> there was an error running yout transaction for the following reason(s): insufficient diskspace
you need more space on the following filesystems: 1089 M on unfortunately not more information displayed. only exit possible. Any experiences with this kind of behaviour? Many thanks for any feedback.
I have just attempted to upgrade my system from fedora 12 to fedora 13 using the preupgrade tool. It seemed to go through fine and eventually asked me to reboot, which I duly did. Does anyobe know if there is any way I can confirm that the upgrade was indeed performed successfully? When I use yum to install packages it is still installing fc12 packages, not fc13. Does this mean the upgrade did not work or do I simply need to manually update the repository conffiguration?
Today I've tried upgrade from F14 to F15 using preupgrade,after reboot,gnome3 can response nothing,but kde and fvwm is ok. how can i do to rescue gnome?
I`m having a problem with upgrading my Fedora 11 to either Fedora 12 or Fedora 13. When i start preupgrade, it lists all packages that need to be upgraded, but then it ends with the message that none of the mirrors can be found. I`m seeing the messages in the console, and indeed all the mirrors return "HTTP Error 404: Not Found". Any idea how to change this and eventually do an upgrade?. I also downloaded the Fedora 13 DVD, and tried to upgrade that way, but it never showed me the window which must give me the option to upgrade instead of doing a fresh install. The explanation in the official website clearly shows that this window exist, but after several tries with the DVD I did not get it.
I'm still on F9, finally hoping to move to F10 today via preupgrade, but the second screen in the preupgrade GUI say "No releases available for upgrade" under "Available Fedora Releases"
I was wondering if there was an easy way to do a fresh install from an old Fedora without using any media ? Maybe there is a possibility to boot the netinstall.iso from grub ?Or tweaking preupgrade to do an installation instead of an upgrade..
I wanna make use of distccd on many computers. But those computers may be up or down because they are users workstations. Is there a tool, or a way to quickly discover which PC are usable ? I though about writing a script which ping, and identify booted hosts, then "export" distcc hosts automatically. But maybe there's some useful tools around ?
I'm not an early adopter; i prefer to wait and see, and let others suffer the new distro's teething troubles. Finally, I decided to try preupgrade. I was a little astonished to find that it doesn't install itself to any menu, but that's OK. I ran it as root, and went on with what I was doing while it got ready. Eventually it prompted me to reboot and I did.
I'd like to say that everything went fine, and in about an hour, I had a working system with no glitches. Alas, that would be a lie. Not only did it change all my customized system sounds (with no apparent way of getting back what I want; the new sounds aren't selectable.) it replaced my carefully-tweaked fstab with one of its own. This mean that several partitions that I don't want mounted were. Not only that, in some cases right-click and unmount got a message that the partition wasn't mounted, even though I could browse it. I had to open a terminal and manually unmount them, followed by copying back my fstab to keep this from happening again.
While doing this, I learned that the arrow keys on my keyboard don't work right, with the up arrow mapped to screen shot, and the Enter key by the number pad disabled. I'm still working around that one.
Worst was that Firefox wouldn't open. Trying it from a terminal, I learned that it couldn't start XCOM. Weird.
I tried a system update, but the livna issue popped up. By good luck, I knew enough to locate the appropriate file and disable it. Yumex has been spending over four hours, downloading and installing more updates than preupgrade did, by almost 100%.
failure: repodata/3a2a6da78e69f9b2608b1c399561b99073baa86b5454618459 ceecb79d58da09-filelists.sqlite.bz2 from preupgrade-updates: [Errno 256] No more mirrors to try.
I receive this error when I run try to run preupgrade to go from F12 to F13.
It's definitely not an issue with my internet connection, I'm running this from a college campus with a 150mbps connection.
I've tried running it 3 times now, and get this every time. It also gives me the error about not enough space on the boot partition, so I press continue there to move on.
just upgraded fc12 -> fc13 with preupgrade. all seems well except for network manager icon missing from the systemtray and therefor unable to connect to wifi. uninstalled network manager and reinstaled but to no avail. wifi is a bcm4318 airforce one btw, broadcom kernel stuff is loaded but maybe in fc13 its supported in the kernel now?
Going from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
it's possible to use preupgrade to go directly from FC8 to FC11.
Also, I'm wondering if this will allow me to avoid formatting my hard drive or not. I'll have backups ready just in case, but was hoping maybe I could get away with not having to do the old two-step shuffle with all my data.
I tried a pre-upgrade last night and after downloading 7GB of stuff over night, (don't ask me why it was that much) I rebooted.
Everything looked okay until I got an error message that said that /mnt/sysimage/... (I can't remember exactly what the error message was, sorry) what did not have enough space and needed 19MB more to install the upgrades.
Now, this system quad boots between Fedora, XP, Vista and 7 with grub being the intial boot loader giving me the option of Fedora or the Windows bootloader.
What I don't understand is why the installer (anaconda?) is having a fit about space when I have 8GB RAM and the system partitions are >10GB in size.
I upgraded to fedora 12 from fedora 11 with the preupgrade tool and all went very well at first try. But now I can't seem to get any sound from anything! I'm using KDE (for the past few years ) and my system in running on an ASUS Z91F.
I did have F11 on my laptop all running smoothly and everything which is good. But now I've updated from F11 using the preupgrade tool which for what I could see everything downloaded and installed ok, that was until the reboot after the install had completed after seemingly loading F12 it left me with a black screen with a blinking cursor so after a few more reboots with the same out come I decided to see what the loading was stopping at and this is what it came up with
Code:
Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: [ OK ] Setting Hostname Fireline.Yuki: [ OK ] mdadm: No arrays found in config or automatically
[code]....
And it stops loading after "Starting atd: [ OK ]" I am going to try a CD install either tomorrow or the day after then I'll go back to F11 depending if it works or not.
I upgraded to Fedora 10 using preupgrade. It installed fine and everything loaded fine. Unfortunately the mouse would not work so I restarted my laptop. Now Fedora won't load at all the PC just turns on then keeps rebooting itself. I really want to avoid using the recovery disk. How to rectify?
I've just finished upgrading to f12 from f11 using the DVD ISO and all is well - I'm looking for a bit of guidance for a n00b on cleaning-up after an aborted preupgrade.A yum --enablerepo='*' clean all didn't clean-up as much as I'd hoped it would and neither did preupgrade-cli --clean - the latter of which reported that there was nothing to clean.I've upgraded all packages and removed orphans and just have the latest kernel installed.
I'm not exactly sure that it goes in 'General' but hopefully it'll be alright here Anyways I'm trying to use 'preupgrade' to update my system but it's telling me I don't have enough space on /boot. I've already followed the instructions on the Fedora Wiki for removing unused Kernels and the like to try to free up more space. Here is what I have when I check the space on /boot :
Code: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 198337 71584 126753 37% /boot Is 126MB not enough? :s
What can I do? Should I be looking to expand the /boot partition's actual size? EDIT: I don't know if it affects anything, but I am running Fedora on an HP Mini 1000 with a 16GB SSD and have about 6.9GBs free overall.