I just installed a package using the System -> Administration -> Add/Remove s/w tool.
How can I find information about what files it has installed and where? I was expecting to get some header files from this package but cannot find them in the normal places like /usr/include etc.
I have installed a package on Centos 5.5, and need to find out the repository it came from, so I can enable the source rpms for that particular repository, and download the source, and rebuild the package. Is there some way using yum or rpm to find out which repo the installed package came from? I know Smart PM shows this info, but it has been hanging on Centos 5.5, for some strange reason, so that's not really an option for now.
View 6 Replies View RelatedHow to find the package that was installed recently or at the last? Is there any command to find this? in RHEL 5.0
View 1 Replies View Relatednew to ubuntu and somethings up with my update manager. theres an alert icon in the right hand corner and its bugging me.. it has the the following error message: Could not initialize the package information. An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message: 'E:Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-lucid.list, E:The list of sources could not be read.' Also, its not letting me add/remove software through the command line nor software center. ANY IDEAS, SMART PEOPLE???
I reformatted my computer last night and put Ubuntu 10.04 on my Dell Inspiron B130 laptop. I made and used the Ubuntu 10.04 live cd last night. Install was uneventful. Now I can't use update manager. I get this error:
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Read error - read (5: Input/output error), E:The package lists or status file could not be parsed or opened.'
Today, on Ubuntu 11.04, when attempting to update, this error message appeared in update-manager:
Code:
An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_natty_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.[code]...........
I have done a scratch install of Ubuntu 11.04 (natty) on my PC with an unrecoverable error during the installation phase. However, I was able to boot the PC with Natty but my package manager and update managers are not working properly. I am pasting below the error message shown by package manager.
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/in.archive.ubuntu.com_ubuntu_dists_natty_main_bina ry-i386_Packages,
E:The package lists or status file could not be parsed or opened.'
HMy Update Manager and Synaptic Package Manager are showing me the following massage when I try to open them: Could not initialize the package information.An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message: E:Type 'n' is not known on line 2 in source list etc /apt/ sources.list.d/ubuntu-wine-ppa-lucid.list, E:The list of sources could not be read.
View 5 Replies View RelatedI'm running ubuntu 11.04 from minimal with unity 2D on my eeepc T91mt.
Worked fine for ages, ran an update and now I get the following error message when using the updater:
"Could not initialise the package information
An unresolvable problem occurred while initialising the package information.
Please report this bug for the 'update-manager' package and try to include the following error message:
I get a similar message when running sudo apt-get update in terminal.
I upgraded Ubuntu 11.04 x86 to Ubuntu 11.10 x86 via system upgrade. Everything was working fine.The setup is dual boot with Windows 7 Ultimate inan old Dell Inspiron 600M.One day when I signed into Ubuntu, following error message showed up when I try to check for update."Could not initialize package information.
View 3 Replies View RelatedGreetings: I have tried installing Ubuntu 10.10 from disk and DVD at home in VMware Player 3.1.3 with success. However, when I go to do updates, the Authenticator freezes and comes up with the following error:
Code: Could not initialize the package information
[Code]...
This is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
I want to get the hardware information in linux. As in windows we can have API to get the network adapter information and all. But in linux why dont we have? i try to read network adapter info in /proc/bus/devices file.. but that file is very hard to parse.and i looked at the lspci source c ode. but unfortunately I dint undersatnd that code to get the network adapter information.
View 1 Replies View RelatedI was trying to open the Update Manager and this popped up... "Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/ph.archive.ubuntu.com_ubuntu_dists_natty_main_i18n _Translation-en, E:The package lists or status file could not be parsed or opened.'"
I am running 11.04 on an HP tx2 laptop. I have been able to perform updates until the last one. Then I get the following message when I try to use update manager or terminal to get updates or just to generally install a new program. Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/ftp.egr.msu.edu_pub_ubuntu_archive_dists_natty-updates_main_i18n_Translation-en, E:The package lists or status file could not be parsed or opened.'
I performed the update from 10.10 online so I don't have the cd nor will I be able to download it. Not enough time to do so.
I searched Using my User Name and did not find the post post made for this problem.Still the search using the User name does not return the first post or this.
View 4 Replies View RelatedWhen I install some packages Yum seems to behave correctly until the the very end when it gives the error: xxx-package was supposed to be installed but is not! I am lookng for any advice which might solve the issue. Below is an example of the yum output.
libgcc-
4.4.2-7.fc12.x86_64.rpm | 75 kB 00:00
Running rpm_check_debug
[code]....
Recently tried to install a new Wine package, but the install failed, so I removed it and reinstalled the old one. That installation also failed, and now the package is in a half-installed state and can neither be installed nor removed. I'd be most grateful for some help - I miss my Wine!
# apt-get install 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
# apt-get remove 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
What does it mean by "an archive", and where can I find one?
I am running a vps with nginx as webserver. For some odd reason (I don't know if it was installed already) apache2 was running before nginx could start. After stopping apache2 nginx starts fine again. But, I want to completely remove apche2, but:
root@vps2:~# apt-get --purge remove apache2*
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package apache2 is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@vps2:~#
but:root@vps2:~# ls -la /usr/sbin/apache*
lrwxrwxrwx 1 root root 34 Jul 5 01:46 /usr/sbin/apache2 -> ../lib/apache2/mpm-prefork/apache2
-rwxr-xr-x 1 root root 5326 Mar 22 23:56 /usr/sbin/apache2ctl
lrwxrwxrwx 1 root root 10 Jul 5 01:46 /usr/sbin/apachectl -> apache2ctl
root@vps2:~# ls -la /etc/ap
apache2/ apm/apt/
root@vps2:~# ls -la /etc/apache2/
total 76
drwxr-xr-x 7 root root 4096 May 27 17:32 .
drwxr-xr-x 88 root root 4096 Jul 5 20:46 ..
-rw-r--r-- 1 root root 7908 May 27 17:32 apache2.conf
drwxr-xr-x 2 root root 4096 May 27 17:32 conf.d
-rw-r--r-- 1 root root 1169 May 27 17:32 envvars
-rw-r--r-- 1 root root 0 May 27 17:32 httpd.conf
-rw-r--r-- 1 root root 31063 May 27 17:32 magic
drwxr-xr-x 2 root root 4096 May 27 17:32 mods-available
drwxr-xr-x 2 root root 4096 May 27 17:32 mods-enabled
-rw-r--r-- 1 root root 750 May 27 17:32 ports.conf
drwxr-xr-x 2 root root 4096 May 27 17:32 sites-available
drwxr-xr-x 2 root root 4096 May 27 17:32 sites-enabled
root@vps2:~#
Apache2 is there and I can start it normally with /etc/init.d/apache2 start but I want it removed, how do I do that?
I'd love to know how to check the original configuration of a self-installed package? For example, I would like to install the package XXXXX. I did:
./configure
make
make install
After the installation, I would like to know what the configuration I used for XXXXX's installation. Maybe some dependencies (for example, A,B,C...) were not found so that XXXXX was installed without depending on A,B,C.... However, now, I would like XXXXX depend on A,B,C... How to check whether the current installed XXXXX's original configuration?
I just installed a package with yum but I can't find any files associated with it. My question: is there a way to make yum tell you which files were installed from a package?
View 7 Replies View RelatedI'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?
View 1 Replies View RelatedInterested in trialing Varkon and used Synaptic Package Manager to download and install. According to the [url]...nstalling.html it should be there under 'Applications'. I've looked through them all and no sign of Varkon. I've also tried to see if Varkon was installed so I looked via Ubuntu Software Center under installed software. No sign. Did a file search for Varkon.
View 4 Replies View RelatedI would like to make a script that determines if a particular package is installed or not. Is there a built in way to do this with rpm or am I looking at getting down and dirty with learning parsing tricks with bash?
View 5 Replies View Relatedinstalling and setting the iptables on U 8.04 LTS? currently iptables is not installed nor as package nor included as kernel module.
View 4 Replies View RelatedCould not initialize the package information An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message:'E:Encountered a section with no Package: header, Eroblem with MergeList/var/lib/apt/lists/in. archive. ubuntu.com_ubuntu_dists_lucid-updates_universe_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 1 Replies View Relatedwas trying to install cairo dock and I'm not sure what happened but when I attempted to open the update manager I got this message,"An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'wget' is not known on line 63 in source list /etc/apt/sources.list'"
View 4 Replies View RelatedI just installed Ubuntu 11.04 a couple days ago. I went to system settings, double clicked update manager, and this came up: could not initialize the package information an unresolvable problem ocurred while initializing the package information please report this bug against the 'update-manager' package and include the following error message: 'E:Type'-2011-05-10' is not known on line 1 in source list/etc/apt/sources.list.d/medibuntu.list'
What does this mean?
I'm looking to use a vnc client so I can connect to my other windows machine. I thought i'd use realVNC as I've used it before from windows and it seems to do the job... the problem is that when I try and install it I get the following message: Package /temp/vnc-4_1_3-x86_linux.rpm could not be installed.
Details: Subprocess failed. Error RPM failed:error: Failed dependencies: libstdc++-libc6.2-2.so.3 is needed by vnc-4.1.3-1.i386
Is it a problem that I'm trying to install this on a 64 bit Suse 11.1 installation? Can anyone recommend a solution (I can't find the package to install), or any other good vnc clients I can easily use?