I have a 32 GB USB stick which I would like to install the full Fedora 11 system to (i.e. the DVD). Is this possible? If yes, how? It seems like the only way to do this is by using the Live CD (which does not contain the software I need).
View 7 RepliesI have tried to install F13 on an 8 GB USB memory stick (flash drive, thumb drive) but have had limited success. I used the Live USB Creator method as suggested in the Fedora web site and although I ended up with a bootable USB memory stick, I was unable to save any changes even though I allowed a 2GB persistent overlay.
I then tried to do it using Unetbootin and again got a bootable memory stick but again was unable to save any changes. Could someone explain what I might be doing wrong or is it just not possible to make a bootable memory stick with F12 that will save any changes?
I recently purchased HP Proliant Microserver with the idea of having it as a home server running Amahi. I added one 2TB hard disk to the already installed 250 GB drive. The Microserver has no cd/dvd drive so I created a bootable pen drive using LiveUSB Creator tool from Fedora 14 installation DVD iso image. However, I ran into problems in the very first phase though I struggled hard, juggling i386, x64, Live images...
Now, for i386 Fedora: The machine successfully boots from the pen drive but after selecting language and keyboard, the installer does not see the installation image - or even the pen drive at all - saying "No driver found". Then, I can only open "Select Device Driver to Load" (screenshot) where I can only see whole bunch of drivers I have no idea which of to select. I tried "USB mass storage driver for Linux", nothing happened, I'm returned back to "No driver found". Haven't found the "HP NC107i PCI-Express Gigabit Ethernet Server Adapter" driver in the list...
x64 Fedora: Same result, though x64 at least recognizes the HDDs that are already in the box (screenshot) so I can try to use image files unpacked on the second one (ext4 formatted). Then, the installation proceeds till the point of formatting the installation drive when it suddenly "Cannot find ISO 9660 image" (screenshot) and I cannot but Exit.
Live x64 image: I tried the Live bootable image from the same pen drive - it booted and installed correctly and at the first glance the system was working fine, connecting to the internet, downloading updates etc. However, this is not my option because I didn't have the option to add additional Repository during the installation from Live image (as it is in this guide, search the page for "Add the Amahi repository"). why the installation is not working in my setup?
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
I have 3 usb stick all 3 working in a friend's computer on my sick toshiba equium i can't get one working . my friend has a usb stick that work on my pc but i can't understand why.i have tried every sick thing like
fat32 boot flag 3 gigs
I have tried to change head cylindres and what ever nothing
I can 't understand why this works
Current partition
structure:
And these not
I am trying to clean install from a USB stick onto an Acer Aspire One ZG5.
Here are the steps I have followed:
- Downloaded ubuntu-11.04-desktop-i386.iso from [url]
- Downloaded Universal-USB-Installer-1.8.5.3.exe from [url]and run it
- Selected 11.04 in USB Installer, pointed to ISO, left persistence at 0MB and run it on a freshly FAT32 formatted USB stick
When the Aspire One boots from the USB stick, it displays "SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al", followed by a flashing cursor on the next line.
1) I cannot type anything (read on some forums that typing "help" should work, but I cannot)
2) MD5 check of ISO is correct
3) I have also tried using unetbootin-win-549.exe to create the bootable stick, but the result is the same (although slightly older version of SYSLINUX)
I've got a Dell Inspiron 1545 laptop (4 years old, I think.) Running Windows xp 32 bit. I'm trying to dual boot it with ubuntu. I've installed ubuntu on a couple of other computer just fine. This laptop though, has decided it hates linux and I can't get ubuntu to install. I get to the first screen and can boot into ubuntu as a live cd just fine but if I try to install it the screen goes black, a ton of text appears, and then nothing else will happen.
So I tried using a usb stick to install. Same issue. Then I tried downloading mint and could not get past the first screen either. I tried debian, and my computer didn't even boot into the installer, it just booted into Windows..
I'm using a computer with XP ishued to me by my company so I can not just install Linux on it.
How would I procede to install Debian on a 16Gb usb stick?
What file system would be prefered and how to get the boat loared and everything needed on it?
I'm trying to install Ubuntu 9.10 from USB stick. I used System>Admin>USB Start up Disk Creator and a 9.10 .ISO version to create the bootable USB stick.
When I plug my USB key into my computer, my computer doesn't boot from it. I tried on several other computers and none of them boot from my USB key. The bios settings on all my computers boot from removable media first.
I repeated the above steps with a different USB key and I still can't boot from the USB key. When I browse the USB key directories, I can see all the necessary files to install ubuntu.
Last year, I didn't have trouble installing ubuntu 9.04 from USB key. Not sure what I'm doing wrong this time.
Can anyone tell me how to trouble shoot this problem?
If its possible to install Windows XP using Ubuntu 10.04 Lucid Lynx, i want to install it to my second Partition cause i need it to play games.
I already tried Nlite, Unetbootin and WinSetupFromUsb and nothing did work for me.
I can only install it with my USB because i dont have a CD Drive.
I got my WindowsXP at my Harddrive as an .ISO file.
how is it possible to install an umts stick in ubuntu?
View 1 Replies View RelatedHaving a problem in installing Natty onto my ASUS EEEPC. Ive already changed the boot menu to install from USB, however, it will not mount the USB in order for it to boot. I created the image using the Ubuntu startup disk creator and also downloaded the image from the ubuntu website (ive already read about the faults with using some torrents). I know the USB stick works and is bootable as ive installed Natty onto a Acer aspire netbook using it. how i could get the USB to mount so i am able to install Natty.
View 4 Replies View RelatedHow can I install lamp on ubuntu desktop but not from online repository but from installation cd or usb stick. Basically, i want to download lamp (still can't find from where), put it on a cd or usb stick and install it on ubuntu desktop on which doesn't have an internet connection, just local network. I have a php software (intranet web site) that should run only in local network.
View 3 Replies View RelatedI'm trying to install Ubuntu 11.04 x64 Server onto a Shuttle XS35GT. The PC has no CD-ROM drive so I have to install via USB.
1. Copy the files to a USB-stick via UNetbootin (WinXP, OSX) or Universal-USB-Installer.exe (WinXP)
2. Boot to the USB-stick in order to install Ubuntu
3. The installer halts at "[!!] Detect and mount CD-ROM" - "Your installation CD-ROM couldn't be mounted. Try again to mount the CD-ROM? (Yes/No)"
4. Selecting either option does not help further the install
What I tried:
- Manually fix truncated filenames in /pool/l/linux/*.udeb (see [URL])
- Alt+F2, mount the .iso as a virtual CD-ROM under /media/iso (no use since the 11.04 installer does not allow manual chosing of the CD-ROM) (see [URL])
- Expert mode install (does not show anything special) (as suggested at [URL])
I had this exact same problem with 10.10 but someone was able to lend me a USB-CD-Drive that time.
i need to install openSUSE 11.2 from an USB stick. I followed this article SuSE install from USB drive - openSUSE using the openSUSE-11.2-NET-i586.iso. Unfortunately the kernel provided in this image doesn't load on my target as it needs a few extra modules for its chipset.
Thus i copied our custom kernel (which is verified to run on the target) and its initrd to the usb stick and i also created a new entry in the syslinux.config. The kernel loads, but then it can't find the root device.Does anybody know, how i need to configure the initrd to make the USB stick the root device?
I'm booting my server from a USB stick. It's working fine, but the root of my file system when booted only has about 100MB left. The USB stick itself has a little over 1GB free. How can I make / take up more space on the stick?
View 1 Replies View RelatedI own an eee pc 900a and would like to install [url] to it.
The eee pc hasn't got an CDROM drive so I have to convert the iso file to an img file to get it on an usb stick for installation.
This page describes how to do that with [url] with Windows, Mac or Ubuntu using usb-creato. But I have non of these available.
How can I convert the iso to an USB image with the help of debian ?
I want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
View 9 Replies View RelatedI am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
View 2 Replies View RelatedI 've a Nokia CS-10 broadband stick (USB). I need to install and configure, and I don't know how do it. I found an article that review something like that: [URL]
1, The stick doesn't detected in the computer.
2. I made all the article steps, but shows me a error in the shell script on line 10.
i tried to install ubuntu netbook remix edition 10.04 on my laptop HP Compaq 550 through a usb flash stick ... with the usb creator which included into the iso image i got this msg (( attached screen-shot )) .i tried another application which makes a usb bootable disk called "UNetbootin" it boots successfully but after booting every thing got FREEZED ... i tried the same thing with ubuntu 9.10 it's succeed .. but i neeed to install 10.04 .
View 8 Replies View RelatedI have tried: 1. zcat boot.img.gz > /dev/sde and copy the image file debian-testing-amd64-netinst.iso to the usb-stick. 2. and manual whit syslinux /dev/sde1And also various builds of testing and it can't load the image file. always i get the error message "Filed to copy file from cd-rom"And i cant ether install 6,01 Before the image debian stable 6,0 worked and several testing builds before the stable release 6.0.The boot process work flawless but installer can not find the iso according to error msgI have verified the iso file with md5sum and made sure to write out to de stick whit sync.And haven't changed my bios boot that worked before.
View 4 Replies View RelatedI'm doing a USB stick install and when going through the installer, after selecting keyboard origin it tried to mount the CD-ROM drive instead of the USB port. I dont have any blank CDs so a live CD isnt an option. It's booting from the USB to get to the installer, just seems like the installer doesnt realize it needs to do the same.
View 2 Replies View Relatedi was writing a .img file to my usb stick with ImageWriter, but it didn't seem to do anything so i clicked the close gtk button and pulled the stick out of my pc. now my pc gives my an when i try to open the stick. is there any way to fix this. I can use win xp pro, win xp media center, win 7 starter, ubuntu 9.10 and ubuntu 10.04
View 5 Replies View RelatedI have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I donīt know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I donīt know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
View 8 Replies View RelatedI have an very old computer who I want to have som a server. The OS who is installed now i Windows 95.
Hardware:
- MMX 200 Mhz
- 160 Mb Ram
- 2113 MB HDD (bad shape)
- Network card 10/100
- 2 USB 1.0
- CD
- Floppy
I wonder if I can install debian on it with a CD, who install it on a 16 GB USB-stick 2.0.
I wonder to if i can make so Debian takes like 20 MB in Ram or less? I will run it textbased.
I'd seen here that Debian must have at least 64 MB in Ram http://www.debian.org/releases/stable/i ... n#id321935
But it's that true? I want a Debian who take ram like Damn Small linux.
The computer shall have ONE function. Run a tiny python script. It will read over 200 pages every 30:e second textbased. Thats what the python program will do. I must have internet connections.
I am trying open suse for the first time and i want to install it on a usb stick this it is the latest version
View 9 Replies View RelatedThough everything is mentioned in the 'Download' section in regard to installation through CD, & generally in every PC, first Boot device is always the CD Rom, what changes ought to be made to install Ubuntu 10.10 using a USB stick?Will the BIOS section allow me to choose the first BOOT DEVICE as my thumb drive?, in order to install Ubuntu using it?
View 5 Replies View Related