General :: Create A Bootable Ubuntu (10.04) USB Installation For Macintosh?
Jun 3, 2010
I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error.Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR):Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader.Partition 2 (ext3) - Ubuntu Linux 64 bit.Partition 3 (fat32) - contains data.What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it?
So since i deleted a necessary package my redhat system crashed. Now, when i had initially installed redhat using a friends disk I copied all the files from the CD-ROM on my external hard drive (of course after installing through the CD)
Now I need to re-install linux and I have no idea how to actually use those files to create an actual automatic bootable installation CD?
I have a WinXP ISO file and was wondering which is the most noob friendly way to creating a bootable USB with it to re-install XP onto my netbook via Ubuntu 11.04.I haven't found any tutorials out there explaining anything on the lines of this.
I'm having a problem creating an USB bootable pendrive, with Debian Jessie stable. I've downloaded the ISO from the site (I have tried with two versions, netinst and gnome). I tried to create the bootable pendrive with the command dd.
I've successfully created bootable DVDs for several distros over the years. First, I downloaded F13 x86-64 the day of the release, checked the sha256sum against the CHECKSUM file (it passed), and burned a DVD. I see 5 folders and 10 files on it, as expected.I restart, and my PC (AMD Phenom 9600 quad, Gigabyte S Series GA MA69G-S3H motherboard) does not boot from the DVD, but from the hard drive.So I get into the bios, check to make sure that the boot order is correct (it is) and try again. No joy.
Next, I assume I screwed up, had a bad burn, down load and burn again, checking everything. Still won't boot from DVD. Try getting the ISO from torrents, (checking sha256sum all the while), burn my 3rd DVD (using Brasero this time) and - same problem.Now I assume I have a hardware problem, and for grins, put in the F12 ISO DVD. It boots from there just fine.So I don't have a hardware problem, and I seem to have 3 good burns, but it's not recognized as a bootable DVD.
I am trying to install Ubuntu Netbook 10.04 on my eee pc. I have a macbook pro with built in SD card reader and a 4 gig sd card. I followed the instructions on the ubuntu netbook download page to create the bootable usb media and it appeared to work, but was not bootable for either the eee pc or the macbook.
I also posted under the apple section of the forums here: [URL]... I also tried using VirtualBox to create a virtual machine that I could install ubuntu directly onto the SD card, but VirtualBox can't work with the built in SD card reader apparently.
Ive installed and have up and perfect a copy of ubuntu, thing is i need windows for recording and xna, i want to make a installer from usb as i havent one cd or dvd i can use for installing and all the quick fixes seem to be either in linux to make a linux usb installer, in windows to make a linux usb installer, or windows to make a windows installer, but i cant seem to find one for linux to make a windows installer, as in i would like a linux program to create a bootable usb of windows of a iso i already have.
I am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
Every time I try to create a bootable USB on my sid boxes, it comes out corrupt. I'm trying to use a multi-arch netinst iso so I can back up my tablet. Anyway, I use
And it won't boot, so I checked the drive with gparted on my desktop, and get some errors about invalid block sizes and corrupt partitions. When I try fdisk, it lists an EFI partition as I would expect, and then another partition with the right size, but its listed as type empty. I also get some invalid size errors there. This happens with an older iso I have successfully used in the past. When I run fdisk on the ISO file, I get the same errors as the USB drive. Here's the output [code]
I think my issue is with the message about 2048 vs 512 byte block sizes. I tried setting up partitions on my drive and just copying data to them from the iso. This makes the BIOS recognize the USB disk and it tries to run the bootloader, but fails since the symlinks are messed up copying that way. I've tried a few different boxes (all running sid) and I get the same results on all of them.
This is the first time that I try to install Fedora 11 to my Cd-driver-less notebook. I try to boot from my USB stick it did not work. For me, only feasible solution is to boot from HDD.
However, how do I create bootable HDD from Fedora 11 live CD? I have already downloaded and burnt Fedora-11-i686-Live.iso to a CD. Since I cannot boot from my CD, I need to boot from the HDD. But how?
Also some additional info: I have already formatted my notebook's HDD by hooking it to my PC. So I can only access my notebook's HDD from my PC (winXP installed) As far as I can guess, I need to partition and format my notebook's HDD based on fedora's requirements. (I do not know how?) And copy some boot and installation files to these partitioned disks. (don't know neither)
I downloaded fedora14 iso and burned it straight to a cd but on reboot, it booted from my hd. My bios is set to boot from cd first.Next I extracted the iso to a subdirectory and burned that to a cd, creating a boot disk using the img file in the [BOOT] directory. When I rebooted, I got a cursor in the top left corner of the screen and nothing else
All of my PCs are set up to either run Ubuntu directly, or are dual boot Ubuntu and some variant of Windows. One of the things I like about this is that in the rare instances that I get a virus I can simply boot into Ubuntu and run ClamAV to remove the virus from there.
I have a friend who recently picked up a nasty virus and we are having a hard time getting his machine to boot at all without all sort of strange behaviors. Under that scenario I can't trust Wubi to work correctly. Soo....
Is it possible for me to create a bootable CD, DVD or USB drive from my machine? I'd like to use my machine because I can update the virus definitions before I create the image and then use that to clean his machine.
I'm trying to create a bootable USB key with Linux (debian) and that can be booted on Macintel hardware. I have read that MAC's EFI can only boot GPT GUID formatted disks. I'm desperately trying to find a good tutorial which explains how to create such a key. Here what I have done so far:
create a GUID partition on te key using Linux GNU parted create a HFS+ or ext3 partition on the key, with the boot flag on install a Linux .iso with unetbootin
While all steps were successfull and in some cases I could even boot on a PC, the step of booting on Macintel software failed (on a macbook). I need to precise that I holded the "alt" key while booting the mac and the only visible bootable disk was the hard disk.
PS: I have tried with rEFIt as well. In one case I had a "Windows" icon but it then failed to boot with a message like "no system found"
How can I create a multi bootable (with menu) cd/dvd that contains a number of live cds? Is there any "easy" way of doing this? Isolinux is the way to go I guess, but is there any tool available for this?
I need to install a bios update to fix my PC after I upgraded the CPU. BIOS update should fix it.
But...This seems to be way harder than it should be. I'd be great if motherboard manufacturers could provide bootable iso images with all the tools to do the job without us having the build these ourselves...
Anyway, how do I go about creating a freedos bootable CDR under Kubuntu that is BIGGER than 1.44 MB!
My image file is 1MB already. The flashing program 32KB. I tried the methods from the various forums and just couldn't get them to work. Either ran out of space, or all the links to fdos were broken.
By the way, [url] doesn't seem to be right anymore and thats where everyone is pointing. I would probably have had this sorted if I could have the 2.88 MB image, but all I can find is a 1.44MB image and I have now idea how you can grow that to a bigger one. Why be stuck with 1.44MB? are we still in the 1990's ?
I've been asked to move data from an old external hard drive to a new one, and to make the new one compatible with the Macintosh. (The old drive's USB connection has died, and I'm connecting to old the drive using a PC card that provieds an eSATA to the drive. The recipient's Macintosh doesn't have a PC card slot, so she can't access the old drive anymore. Hence, the new drive.)
Naturally, I'm doing this data transfer using Linux. I've discovered that I can format the drive as HFS+ using mkfs.hfsplus from the hfsprogs package. But I need to know: do I need to do anything special with the partition table? Is there a special Macintosh partition table format that I need to format this disk to? If so, what tools can I use to get the right format for the partition table?
I am having issues on playing music in Linux (Ubuntu 10.10). I installed windows and linux on my macintosh computer. windows and linux are not on virtual machines and they are directly installed on my hard drive and have their own disk partitions. When i am on linux, the speakers on my mac does not work with linux. I suspect that the sound driver may not be compatible, but i am not sure. When I stuck in the bootcamp cd into windows the disk took out windows driver called "realtek audio" and replace it with sigmatel audio and/or cirrus audio.Also i was wondering if their was some cd like bootcamp for linux to make sure all the proper drivers are installed so then it works on my macintosh?
I'm working with an employer as part of a college internship. I work on anyone's computer that brings it in. Some lady brought in a macintosh. I'm not here to give my opinion on evil, controlling corporations, but I can't figure out how to get the thing to change boot order.
It has an old and unsupported version of OSX, it's "panther" and I can't even install any firefox after 2.0. It has 256mb ram and a 1.8ghz single core so I thought to dual boot it with debian.
-Tried holding "C" -Tried holding "option key" (alt) -Tried holding command (windows) + option + shift + delete -Went into system prefs and chose "startup disk" but it doesn't list the CD drive at all.
The bios, or whatever it is, is completely blank at startup besides an apple logo.
I am running ubuntu 9.10 on my pc, trying to update the bios on a thinkpad a31. I'm trying to create a bootable iso disk from the downloaded file from ibm (spsuiv69.exe) it is currently sitting on my desktop.
To be clear - I am having trouble making the .exe file an iso. I read this is the best way to update bios on a linux machine, if there are better ideas - whatever works.
I lose my W7 DVD a couple of times and im tired of making DVDs when i can just create a Bootable USB but the only thing wrong is that i know of ...you can only create Ubuntu USB in Ubuntu.... In Windows you can create a Windows USB with progrmas and UBuntu as well... SO since windows can make multiple USB bootable... Does Ubuntu have a Program that will allow me to Create a Bootable Windows 7 USB?
how to creat a bootable pen drive of ubuntu 10.10???
i can't make bootable usb flash drive of ubuntu 10.10 useing "Universal-USB-Installer-1.8.0.4" as [URL]. how can i make a bootable ubuntu 10.10 using my pen drive. i have the .iso file.i don't want to burn it into cd.
Running: Ubuntu 9.04 32 bits I'm trying to create an bootable usb drive for installing windows 7 so i took this release"Microsoft.Windows.7.Enterprise.x64.Integrated.Oct ober.2010-BIE"
1. Extracted to get the iso
2. Formated my 8gb usb flash drive with gparted
3. Extracted all the files from the iso with UNetbootin to my usb stick
4. Restarted and selected boot from removable drive in the bios options
After step 4 nothing worked i tried to remove booting from the hdd to force the computer to boot from the usb drive but just get the message that i need to insert an bootable media or restart.
Tried several times and the usb worked propperly while installing ubuntu 9.04 which I run this writing moment. I'm out of ideas and I don't have an cd/dvd reader to boot an dvd from either so via usb is the only thing my knowledge is capable to.
ok so i want to create a bootable CD containing some usefull progs.. ie gparted live / clonezilla live / Memtest etc.... how would i go about making this cd with a choice window to select what application i want to run ?
I followed the directions on the Ubuntu site and on the forum but am still unable to make one.I used the Universal USB installer (as directed by the Ubuntu download page) and the unetbootin utility as found on a thread in the forums. To ensure that it was not the USB drive, I've used a Kingston drive and a SanDisk drive. Both report "no Operating System found" when attempting to create the drive.I'm using Win7 x64 to create the bootable drive, and ubuntu-11.04-desktop-i386.iso as the image.
is there any kind program works under ubuntu, like nlite for windows? i need to create a windows xp bootable cd.and need to add sata drivers in this cd.
