Fedora Installation :: 12 - Get The BIOS To Have A USB Option?
Mar 31, 2010
I'm completely new to Fedora, though not to Linux (I'm switching from Ubuntu 9.10, now) and am having a few problems getting it installed. I followed the installation instructions, torrented the i386 DVD image, and put it on a 4gb USB drive using UNetbootin.
This is where my problems started. I restarted the computer, figured out which F key I needed to press to select the boot source, and then there wasn't a USB boot option. I've looked all over the place (using Google) and can't find out how to get the BIOS to have a USB option there-- I'm using a Toshiba Satellite A10, and that doesn't come with the USB boot option.
Now I'm trying to either figure out how to add the USB boot option or find another way to install. Burning a DVD (or CDs) doesn't work, as I don't have the resources to do so. I've seen somewhere that there's a way to install from a hard drive partition, but no instructions on how to do so (if someone could point me to a way to do that, it seems to be my best option right now-- if it even exists).
View 4 Replies
ADVERTISEMENT
Jun 9, 2010
I was wondering to restore on old laptop to working order. This laptop is an old early 2000's Sony Viao, which I found in the trash. Still powers on, and can boot the latest Ubuntu LiveCD. The issue is that it did not have a harddrive in it, and I really do not want to shell out money for a drive for a laptop this old, but would still like to bring it back into service as a thin client or general purpose web/email terminal. The BIOS does NOT have a USB boot option, and every tutorial I have seen requires that in order to boot Ubuntu from a USB stick (which is what I do have). What I am wondering is, is there any way to just keep the LiveCD in the drive and use that to boot the kernel, etc, and then have it look for the rest of the filesystem on the USB stick?
View 6 Replies
View Related
Mar 22, 2011
I have Intel development board where I boot Fedora. If I use AMI bios then Fedora boot without video, I however can communicate to kernel via serial console. I suspect that this problem with video related to Legacy Bios Rom option. I however don't understand why it influences Linux, because it has good video driver. It was checked with another bootloader. what role is played by Legacy Bios Rom option.
View 1 Replies
View Related
Jul 17, 2010
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
View 3 Replies
View Related
Oct 14, 2010
H/W : Intel 1.6GHz, BioStar U8548
S/W : Ubuntu 8.04 + RTAI + EMC2 (CNC controller)
In configuring CNC controller system, latency-test must be run to find maximum jitter of the system. It counts about 17,000 ns for few minutes, then it suddenly rise to 260,000 ns. It is impossible to control CNC with such large jitter.
In tracing this problem, I found that Award BIOS setting "Delay Prior to Thermal" is firmly engaged in making a problem. When I set this setting to 4 minutes, it makes large jitter periodically with exact 4min 15sec period. When I changed this setting to 8 minutes, its jitter is 8min 15sec period.
But, there is no option to disable this BIOS setting.
I heard that ACPI enabled OS can take over the ACPI function of the BIOS (which may include this "thermal" setting), but RTAI tuned kernel don't include ACPI modules.
Is there any solution to this problem ? If I recompile kernel with RTAI with ACPI processor module enabled, would it be a another problem maker ?
View 1 Replies
View Related
Mar 28, 2011
I ran Ubuntu desktop for a while then installed Ubuntu Server 10.4. I restarted the machine after install and now I am freezing at the BIOS loading screen right after the "Intel (R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R" part.Have tried: taking all USB devices, cd's, etc, out.Edit: ATA AHCI BIOS, Version iSrc 1.02.23 11212006Am installing on a Dell Dimension E520
View 1 Replies
View Related
Nov 16, 2010
i have ubuntu 10.04 server on a usb (it is an .img file) , and i.m trying to install it on an ancient machine (64mb of ram to be exact), and it has no usb option in the bios menu.
View 8 Replies
View Related
Aug 29, 2010
Under Windows XP in the C Drive, I've downloaded PLoP boot manager to force the USB boot. I've tried about a thousand things and I get a different error message at different times from each attempt. I've got all of those documented, and I imagine I'll need to post them. I'm just not doing it quite yet as sometimes I give too much information and I really feel that I'm being an idiot here, missing something simple.
I'd like to install openSUSE onto the D Drive, using the USB and PLoP to boot it. I've downloaded openSUSE's torrents for all iso's (Net, DVD and LiveKDE). In order to get those files onto the USB, I first format to FAT32. I've tried UNetBootIn, LiLi, and mounting the iso on Daemon Tools and then copy-paste into the hard drive. None of these work and they all give different errors.Is this even possible, am I wasting my time? This is getting incredibly frustrating as I've been at it for nearly a week.
View 9 Replies
View Related
Feb 20, 2016
I was using Arch Linux and encountered an issue with dmraid because it thought my array was removable, which it wasn't. Without any answers or being able to revert to an older kernel, I gave up and switched to Debian, which read my array fine. However, today I updated Debian (sid) and got the 4.4.0 kernel, and the same problem came up... Right now, I'm still running 4.3.
According to this link:URL....the problem is clearly because of the kernel, though technically, the kernel isn't wrong. But unlike the people in that link, I don't have an option in my BIOS to disable hotplugging for my array.
View 1 Replies
View Related
May 9, 2010
I want to run my Debian install in AHCI mode on my computer. It runs perfectly fine, all drivers etc work perfectly also. The computer itself is in RAID mode but with all 4 RAID channels disabled (I refuse to use any RAID arrays because I simply don't like them). However, my computer (Acer Aspire m3640/m5640, motherboard MCP73PV/630i) has greyed out the option for me to change the option from RAID mode to either IDE or AHCI. Since I do not use RAID at all, I want to change to AHCI but it is greyed out in the BIOS. This option wasn't greyed out before as far as I remember.
I also have Vista x64 installed on a SATA drive along with Debian all partitioned. I also have an empty IDE drive attached which will be used for another operating system AFTER I have changed to AHCI mode. The SATA drive has the boot flag. I use GRUB to boot the operating system. My BIOS version from American Megatrends is R01-A3 (not the latest one, but the one I need to use). My question is this, how could one possibly go about as to changing it to AHCI mode from RAID with the BIOS greying the option out. how to make the BIOS ungrey the option (if there is another option preventing it from being changed or if the harddrives need configuring etc). I am not particularly concerned if the drives need to be wiped.
View 8 Replies
View Related
Jan 5, 2010
As I understand, Fedora 12 sets up Intel ICH (when set in BIOS) as mdraid instead of dmraid.I would like to setup my 2 SATA hard drives so ultimately my /boot partition is RAID1, my / (ROOT) partition is RAID 1, and my swap is either RAID0, or fstab referencing 2 partitions on 2 of the drives, both set with pri=0 (which supposedly is equivalent to striping of RAID0, performance wise).
Assuming Fedora 12 uses mdraid for my configuration in either instance, am I better of enabling, or disabling the RAID mode in the BIOS? This system is strictly Fedora--no dual booting, no Windows. Any performance gains; reliability benefits between either scenario?It's a Intel P35 motherboard with ICH9R. Storage configuration is either "AHCI" or "RAID"
I ran into some strange issues with dropping drives with the RAID set on in BIOS. When it was set, that gave me two md devices of md126 (RAID0, swap) and 127 (RAID1 split between / and /boot). I think I had md126p1 for the SWAP, and md127p1 for /boot and md127p2 for / Within purely software, i have:
/dev/sda1 RAID
/dev/sda2 swap
/dev/sda3 RAID
[code]...
I suppose unless the BIOS enabled RAID is supposed to be faster, I'll stick with a purely software route and keep the BIOS set to AHCI.
View 1 Replies
View Related
Jan 31, 2009
While building my new server I grinded ta hold shortly after inserting the FDR10 DVD.
Hardware:
Chenbro es34069
Albatron KI690-AM2
AMD Athlon X2 64 4850E
IDE 2.5" HD (master)
IDE Slimline DVD (slave)
4x SATA II swap (still empty)
It stops at the message "net: Registered protocol family 2" but in one of my desperate attempts I changed almost every setting in my BIOS (updated to 1.07) and all of a sudden it passed on. Stupid enough I figured it would be a small effort to find the setting and figure out the problem, so I changed them one at a time after loading the defaults....
View 6 Replies
View Related
Jun 8, 2009
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies
View Related
Nov 14, 2010
I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
View 8 Replies
View Related
Sep 8, 2011
I updated Fedora 14 with the new kernel-2.6.35.12-88.fc14.i686 but when I reboot its rebooting automatically after showing the bios. What can I do now.
View 3 Replies
View Related
Jun 10, 2009
Server has DQ35JO board, 8GB memory, multiple SATA hard drives. It was happily running Fedora 10, and Fedora 9 before that. I downloaded and burned the F11 DVD, booted it, did an install which is:
-- delete the LVMs
-- create a 200 MB /boot on ext3, the rest of /dev/sda on ext3 as /
-- reformat the swap partition on /dev/sdb1
-- leave the other file systems alone (they are all ext3)
I chose no optional packages and let it install. It finished normally and got to the "click to reboot" screen. Now, my server is completely bricked. When I power it up I get a blank screen with a blinking cursor. I cannot even get to the BIOS, or boot my Fedora DVD, much less boot the boot drive.
View 6 Replies
View Related
Jul 8, 2010
I'm attempting to install F13 on a server that has a 2-disk RAID setup in the BIOS. When I get to the screen where I select what drive to install on, there are no drives listed. The hard drives were completely formatted before starting the 13 installation. Do I need to put something on them before Fedora will install?
View 3 Replies
View Related
Jul 18, 2010
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies
View Related
Jan 17, 2009
I downloaded from [URL] files FC-6-i386-disc1.iso through FC-6-i386-disc5.iso from windows vista with get right. I checked the files with sha1sum.exe and the numbers are correct. I burned the cd's with roxio creator de. Then I go to the other computer and start the installation and at the beginning there is an option to test the cd's before installation proceeds. All cd's tests fail. So I would like to be sure: Have I been buying bad cd's? Note: I have tried 15 cd's, all failed.
View 14 Replies
View Related
Mar 11, 2009
Installed fc8 about a year ago. Had to use text mode because of nvidia video card, but got everything working fine. Dual boot with separate physical drives. (XP on 250G, sda; fc8 on 80 G, sdb). Now trying to replace fc8 with fc10 and hope it will work just as good (still have to use text installation) . However, I have some specific questions as I go:
#1. When I try to use the upgrade existing system option, I get an error that says: "Error mounting device / dev/VolGroup001/.Log Vol100 as /: mount: Special device /dev/ dev/VolGroup00/LogVol00 does not exist." Does this mean I need to do a fresh install of fc10, instead of upgrade?
#2 (Backed up and started fresh install). Made the selection to only re-partition and use the 80G (sdb) drive. (leaving the 250G, sda disk alone)..However, the partition table that produces shows values for the sda (250G)disk partitions that will be somewhat different (maybe not significantly) than those I observed in XP's disk manager tool. (For instance Windows says my ntfs partition is 206GB, yet the partition table in the fc10 installer (text mode) says ntfs partition will be 211GB). Is this normal? A 5GB difference? (This is where I aborted the install).
#3 I just want to replace fc8 with fc10, and have it work just like before. One more thing: If I go ahead with fresh installation of fc10 will it give me the option of leaving Grub as it is? (on sdb1 and chainload to XP?) Am hooked on Fedora, but need my 250G drive just as it is.
View 3 Replies
View Related
Apr 22, 2009
there is no option that static ip cannot be configured during fedora 10 installation. I may be wrong, as i am now to fedora.
View 7 Replies
View Related
Jun 8, 2009
I'm trying to upgrade my current fedora 8 box to fedora 10. I downloaded the cd images and burned from the fedora website. After I booted my laptop using the fedora installation cd, the anaconda program started and went immediately to the keyboard selection, language selection, etc. but no upgrade option screen was shown at all until the point that I have to choose my partitions where it was obvious that a fresh installation was being done.
Using crtl+f2 I checked the /tmp/anaconda.log file, whoch has the warning: "step install type does not exist". At this point I do not know exactly what is going on.
View 11 Replies
View Related
Oct 12, 2009
I need to make a fresh new installation of KDE Fedora 11 where some partitions are formatted using XFS. The installer's partitioning wizard has no option for XFS. I've been able to load the XFS module as root (modprobe xfs) but it looks like the XFS tools are completely missing.
Two of these partitions are / and /home so it'd be quite hard to do the "switch" after the installation.
I have read the FAQs at [URL] as well as the XFS thing by Colin Charles. But as I am new to Fedora I don't understand the sentence "At the installer prompt, type this ...". If the installed is the bootloader, then adding the xfs in the end of the boot line won't help. If the installer is the iconized program I see on the desktop after the end of the boot, the it's name is "liveinst" and adding the xfs option won't help.
View 2 Replies
View Related
Feb 19, 2010
how to use dual boot option?? i wanna use xp and federo.
View 1 Replies
View Related
Feb 12, 2011
I just installed Ubuntu 10.10 on my computer which Windows 7 and Fedora 14 have already installed. After rebooting, the menu list of Ubuntu which is grub2 does not contain an option for Fedora 14.
I typed sudo /sbin/fdisk -l and the result is:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xae33e99a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 13055 104754176 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13055 22887 78976562+ 7 HPFS/NTFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 22887 60802 304551937 5 Extended
Partition 4 does not end on cylinder boundary.
/dev/sda5 46838 46901 512000 83 Linux
/dev/sda6 46901 60802 111654912 8e Linux LVM
/dev/sda7 22887 41123 146484224 b W95 FAT32
/dev/sda8 41123 46716 44920832 83 Linux
/dev/sda9 46716 46837 973824 82 Linux swap / Solaris
Partition table entries are not in disk order
My Ubuntu partition is /dev/sda8 and my Fedora partition is /dev/sda6. Grub2 seems to be more complicate than grub1.
View 3 Replies
View Related
May 30, 2011
I have a standard F15 installation with Gnome 3 from the live CD. I got bored and decided to play with a few other WMs and DEs. I installed KDE-base, but KDE does not appear as an option at login. Is there something else I need to install? XFCE, Openbox, and Classic Gnome with Compiz all appear in the menu. KDE does not.
View 2 Replies
View Related
Jan 31, 2009
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
View 2 Replies
View Related
Jun 10, 2009
I guess this is the right forum category for this. Am using the preupgrade method to go from F10 to F11.Downloading packages now. Just wondering if anybody knows if Anaconda will give me options to set up separate (ext3) partition for boot? (Since current grub won't work in the new ext4 file system scheme.)
View 2 Replies
View Related
Jun 20, 2009
upgraded from Fedora 10 to 11, had both KDE and Gnome desktops installed under 10 but now upgraded to 11 I get a boot error when truing to boot to KDE and most KDE apps that used to run under Gnome no longer do so
View 1 Replies
View Related
Nov 21, 2010
I am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb
vga=791 [nomodeset]
vga=1 [nomodeset]
xdriver=nv nomodeset
xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
View 11 Replies
View Related
