Fedora Hardware :: Monitor Resolution In 14 - Get Is 1280x900 @ 60Hz
May 10, 2011
I've installed (in fact, reinstalled) Fedora 14 64bit and I just can get the resolution that I need with my legacy monitor. It's a CRT Samsung SyncMaster 753DFX. The video card is an NVidia GeForce 8600 GTS and I've installed the driver with the guide found in this same forum [URL] with the akmod one.
My problem is that the same HW with Windows XP run resolutions (among others) of 1280x800 @ 85Hz and 1280x768 @ 75Hz, but in Fedora the nearest one I get is 1280x900 @ 60Hz and that 60Hz makes me dizzy after a few minutes. So, it's posible to get the same configuration in Fedora as I got in Windows XP? And if it's possible, how can a get it? My xorg.conf have this info:
[Code]....
View 12 Replies
ADVERTISEMENT
Mar 20, 2010
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
View 1 Replies
View Related
Jul 4, 2010
today i was trying to activate KMS by adding:
Code:
radeon.modeset=1
to grub.
it worked fine, and fixed the black-box bug in cairo-dock, and i finally had a nice graphic bootscreen again.
but another bug occured: im running dual-screen setup, my notebook is connected via vga to a dell 22 inch widescreen TFT.
by default both screens running with 60hz and no problem.
now, after activating KMS it happend that, while the dell monitor still ran 60hz, the notebook screen was running with 61hz! it was shown in the monitor-options.
the notebook monitor was therefore flickering a bit for 5 seconds, than running fine for another few seconds. then flickering again. (obviously, as 61hz is too much when it should run with 60hz!)
so my question is: how can i activate KMS again and have both of my screens running with 60hz again? is there an option?
View 1 Replies
View Related
Jun 29, 2010
I start, e.g. Lightsmark having set up Vsync, so that video would be smooth and not tear. It shows 60FPS - just as monitor refresh rate - 60Hz, but as i see, video is still jerky when there are many objects rendered.
What could be the reason, i wonder? How could i investigate this?My video card is nvidia, Vsync etc. are set up via nvidia-settings.
View 5 Replies
View Related
Nov 5, 2010
I have a 22'' monitor. And I would like to set resolution to 1280*800. This is the resolution set in Windows in my computer in another disk partition. So I dont understand why I can't do the same in Fedora 13. The default resolution is 1680*1050, but everything looks too small. Other options I can choose are uselesnes because it distort everything.
View 2 Replies
View Related
Aug 28, 2009
I installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
View 9 Replies
View Related
Oct 1, 2010
It seems that whenever I boot my laptop (hp probook 6450b) without a monitor attached, then boot with a monitor later attached, the configuration gets all messed up.
Currently, if I boot with the monitor attached, right after the blue loading screen (at the login prompt) i get two black monitors and a mouse, with no login screen. Unplugging the monitor shows the login screen on the laptop.
If i boot without the monitor attached, log in, then plug it in, i see the following from xrandr:
Code:
Screen 0: minimum 320 x 200, current 2390 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 310mm x 174mm
1366x768 59.6*+
1024x768 60.0
[Code]....
However, now when I reboot, all settings are lost, and if the monitor is attached, i get the black screen with a mouse at login.
I did notice that when I shutdown, it hangs on "Running guests on default URI", and i get a stack trace. It will keep dumping stack traces, and i have to hold down the power button to force it off.
View 2 Replies
View Related
Nov 14, 2010
problem happens after installing nvidia driver.everything was fine.the nvidia driver has been detected and functioning correctly.but my monitor,acer x173w which can go for maximum resolution of 1440x990 but i'm still using 1024x768.
View 1 Replies
View Related
Oct 27, 2009
I am trying to install Fedora 11, but the monitor that I am using is only 640x480. When the window comes up to start the install, I cannot see any of the buttons or tabs for selecting the items. How can I adjust the resolution so that I can see the entire image in my screen?
View 5 Replies
View Related
Feb 27, 2011
I have a HPL2045W LCD monitor connected to my Fedora 14 PC through a Belkin KVM switch. On Fedora 12, the screen resolution (upto 1680x1050) was correctly recognised, but in Fedora 14, the best I can get is 1024x768. How do I correct this obvious error?My graphics card is an ATI Radeon RV2600 which has worked flawlessly for several years, until this version of Fedora.
View 12 Replies
View Related
Mar 30, 2011
I'm a new Fedora/Linux user and I've just setup my first laptop to use Fedora 14. However, I've come across an issue and I've done a lot of searching on various forums etc and basically I'm going around in circles. I've had my PC hang already after I tried to create a xorg.conf file. I have since removed the changes I made.
I have a a SIS 771/671 PCIE VIA Display Adapter (rev 10). I got this info via the lspci command. The problem I have is that it's not letting me select a resolution above 1024 * 768. I know it has higher resolutions as when it was a Windows XP and Vista PC I had higher resolutions. There has to be an easier way to set a screen resolution that manually editing cryptic files and knowing refresh rates etc.
View 12 Replies
View Related
Jul 26, 2011
Today my desktop reverted to 1024x768 resolution immediately after init. I tried changing it back but only 1024x768 and 800x600 are listed as supported in the display settings, even though my monitor supports resolutions of up to 1360x768. Rebooting the system did not solve the problem.I'm running Fedora 15 x86_64 on kernel 2.6.38.8-35 with the proprietary nvidia drivers of version 275.09.07. My monitor is a Samsung SyncMaster 933n. nvidia-settings is apparently not detecting it correctly, it thinks I'm using a CRT monitor.I was actually in this exact same situation a few months back, but it kind of went away on its own, so I didn't mind too much. So, what could be causing this, and what can I do?
View 13 Replies
View Related
Apr 13, 2009
I have just installed Fedora 10 and all went well except that the resolution is set to 1024x768, which is not cool on a 22" HP w2207h LCD monitor. When I bring up Monitor Resolution Setting the Mirror Screens is checked and 1024x768 is the highest resolution. If I uncheck Mirror Screens and select "Laptop" I am able to select 1680x1050, but it now has my desktop in the upper left hand corner of my monitor. Should I be looking for a driver for my i845G graphics processor?
PS: I am new to using Linux please be patient with my ignorance.
View 2 Replies
View Related
Feb 18, 2010
I have two displays: my main being an Apple Cinema Display (1920x1200), and my secondary being a Compaq W17q (1440x900). Previously all applications saw the secondary fine, being able to detect its name, native resolution, refresh rate, and so forth. But today, for no reason, after going into nvidia-settings the display is now being called "CRT-0" with only 4:3 resolutions available (1024x768 being the highest).
So now I'm stuck with the wrong resolution on my second monitor. All I can guess is that something more integral in Fedora is no longer able to read the EDID in it or something (I say integral as it's not just nvidia-settings, its everything, not to mention my install of Win 7 still reads the display A-OK)? Maybe I could just force the 1440x900 resolution? If so, how? Everything I've tried so far has either had no effect or resulted in glitch city.
View 1 Replies
View Related
Jan 18, 2010
OS: Fedora 12
Video card: ATI Radeon 9200 series
Monitor: ViewSonic 19"
I installed Fedora 12 configured Gnome automatically. Generally default settings. My monitor was connected directly to the video card and all was good. My video card was detected and my monitor was detected as ViewSonic Corporation 19" and I can set the screen resolution to 1280x1024. I had no xorg.conf file, as it seems that Fedora 12 does a great job of PnP to just set everything up.Now I go and complicate things by hooking up my monitor through a KVM switch. All of a sudden my monitor is "Unknown" and the best resolution I can achieve is 800x600.
Sure, I could go and reconnect without the KVM, but I want to be able use it.Is it possible to edit xorg.conf to tell it "Trust me, just use 1280x1024 at 60Hz even though you can't figure out what the monitor is"?
I tried a number of the posted suggestions to generate xorg.conf files but none of them get me what I need. A simple sample file listing that does the minimum is greatly appreciated (I can experiment from there once I get a basic setup working).And can someone explain if it is X or the ATI driver that is getting confused by the unknown monitor type. It helps to know what is actually going on in addition to a fix (so I can figure it out myself in the future). Thanks!
View 3 Replies
View Related
Jan 23, 2010
I have a fujitsu siemens monitor C776 (built by Hansol E17CL)
FC12 can't autodetect it
If I go system -> preferences -> display the button: detect monitor does not work
I can't change resolution which is stopped at 640x480:
View 1 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
May 13, 2010
First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.
So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.
View 10 Replies
View Related
Dec 5, 2010
I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
View 2 Replies
View Related
Jun 23, 2010
How to change the resolution of my tv to be the same as the monitors. I mean cloning ..
View 9 Replies
View Related
Aug 26, 2010
just installed ubuntu10.04 has set monitor resolution to 800x600 i need 1920x1080 i have been at this for two days now and getting absolutely no where , i could set this on windows in 5 minutes , why does it need to be so hard on ubuntu, i really prefer ubuntu to windows but problems like this really can drive one to despair. i have tried so many different web sites and follow instructions but keep getting command not found which i dont understand why. here is an example of something i tried in terminal xrandr --output VGA --mode 1920�1080 --rate 50 i get warning: output VGA not found; ignoring.many other things i have tried come up with command not found .
View 4 Replies
View Related
Oct 15, 2010
I have a laptop with an "ATI Technologies Inc Mobility Radeon HD 3400 Series" video device. I have trouble configuring the second VGA monitor attached to the laptop to 1024x768 resolution. It is always stuck on 2560x800. My xorg.conf file is as follows:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
Option "DefaultServerLayout" "dualscreen"
EndSection
[Code]...
View 2 Replies
View Related
Jul 25, 2011
Just installed 11.04 on a box that it is on a kvm switch. As long as the switch is connecting the monitor to the booting Ubuntu box, the resolution of the monitor is detected OK. However, if for some reason I am working on a different box and the KVM switch is routing K V and M inputs to the other box, then Ubuntu defaults to what seems a botched VGA setting (i.e. it chops off top and left sections of the display).While in this "VGA" mode if I log out and log in, it re-detects the resolution ok.Is there any way to force Ubuntu to use a specific resolution no matter what? In this way, if I am working on a different box while waiting for Ubuntu to load, when I switch the resolution will be OK.I tried the only thing I can think of and this is to set the "good" resolution as "default" for "all" monitors, but it has no effect.
View 2 Replies
View Related
Aug 14, 2011
I was playing around with the NVidia settings control panel today and I saw that its Resolution dropdown was giving me options for
1680*1050
1920*1080
My monitor supports up to 1440*900. When I selected one of the higher resolutions, it didn't look very sharp, and the text was somewhat fuzzy and lacked clarity. Was this rendering being done by the graphics card but 'compressed' by the monitor?
The status said 'switched to metamode'. I tried searching but found nothing - what exactly does MetaMode mean? I'm more interested in understanding what was happening, only experimenting with the higher resolutions. What monitor and resolution do you have?
View 1 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
Jan 27, 2015
I have a fresh installation of Debian 7.8 on my Dell Precision notebook. Somehow I failed to configure Xorg in a proper way. I do have X up and running, but I can not change my monitor resolution. Here is my graphics card.
Code: Select all$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon HD 8800M Series
I tried to follow suggestions from Debian Wiki, somehow nothing really worked (https://wiki.debian.org/AtiHowTo)
Code: Select all# aticonfig
aticonfig: No supported adapters detected
Code: Select all# X -configure
Terminated with an error, below is the Xorg.0.log file
Code: Select all[ 227.953]
X.Org X Server 1.12.4
[code]....
View 2 Replies
View Related
Jul 8, 2011
I tested OpenSuse 11.4 as a guest OS via virtualbox on a win7 32bit host. Output to my 16:9 screen was perfect with a plentiful choice of high resolutions. Now with Suse (32 bit) properly installed as the host the only resolutions are 1024X768 and below and I am stuck with 4:3 ratio. My PC is an Intel Atom D945GCLF2 which has integral graphics. The monitor is the VGA input of a Samsung TV.
View 9 Replies
View Related
May 27, 2011
Got a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.
View 6 Replies
View Related
Jan 6, 2010
why both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies
View Related
Jan 30, 2010
I simply ran the Guest Additions CD (on VirtualBox), double clicked the x86 (I'm running 32-bit) executable, and got that error.
View 6 Replies
View Related
