i'm using last fedora 12 x64, all updated, my laptop motherboard is SIS U50SA, Intel proc, while on AC power the fan is always on, I have checked and no process is running at 100% of cpu, but when I run on battery only - the fan turn off, what could be wrong?
View 4 RepliesI use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:
wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.
I'm looking for any power monitoring devices for Linux to allow monitoring power quality, voltage changes, and outages. This would be for North American three phase power system. I want to have this data fed live to my own program. It should be something much better than just jury-rigging a circuit to fee the power waveform into 2 or 3 audio cards.
View 10 Replies View RelatedI had unplugged my PC last night as sometimes there's storms at night this morning I plugged in PC and the power light is blinking and the PC wont come on at all tried different power cord, same result
PC is a AMD athlon64 3300+ 2.4ghz SiS graphics
probably the power-supply or what?
If it is the power supply, how do I find new one as I've never had to replace anything on it or any other PC?
Also, I really need access to the hard drive but it's a weird hard drive and was wondering if I could put that hard drive in my K7 PC, which already has 2 drives in it can a pc have 3 drives? do I have to add/have another ribbon cable for 3rd drive?
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies View RelatedAfter much research, I have found the solution to my intermittent wireless problem!Whenever the laptop is plugged into power, wireless is perfect, when I'm on battery, wireless is horrible.Here is the fix:
Code:
sudo iwconfig eth1 power off
Unfortunately, I have to type this in everytime I unplug the laptop.
[code]....
My problem arises two days ago. Power button of my keyboard has stopped working,why?It works well when I use windows.
View 2 Replies View RelatedUnbeknown to us our son removed the battery and I unplugged the power cord. Instant off! Since then I can't restart. The error is very lengthy but each Control-D brings a reboot but the same sticking point. If I understand correctly I am asked to run setenforce as root. I did this and it does each separate file. How many will I have to do? Is there another way to restart?
View 4 Replies View RelatedDoes anyone know of a way to determine how the PC/Server was powered on? I'm interested in writing a startup script that performs a specific action depending on the poweron cause.
For example:
If powered on by "wakalarm" perform task X & shutdown.
If powered on by "power button" perform task Y.
Is there any way to determine the cause of the power on? I'm running Federa 12.
I've got a F10 machine set up as a media center (with mythtv...mythdora to be precise) and I love that it's based on fedora since I'm most familiar with it..I would like to map the power button press to a command "pkill X" since sometimes the frontend freezes and running this command kills X (I'm running ratpoison for the speed and simplicity...it just gets the job done and doesn't get in the way).Any help in mapping a single button press to "pkill X" would be greatly appreciated. I also need some help adding this command to the sudo list so the regular "mythtv" user will be able to run it...no password can be entered since the machine has no keyboard. Currently I log in via ssh to get this done but it would be nice to not have to boot up a laptop just to do this.
View 3 Replies View RelatedI installed F12 KDE from the live cd and now when I Shutdown or Reboot, it takes 2 minutes and 8 seconds for the machine to power off. Yes, I timed it. Happens everytime like that. Even when booting from both "mainstream" live cd and the KDE spin live cd. When I hit the Shutdown or Reboot, it goes through the daemons/services shutdown the flashes up the Halting System or Please wait while the system reboots messages (respectivley), turns off the LCD and then just... sits with the power light on and hard drive activity light on. I should mention this is on a Toshiba Laptop about a year old. Intel Chipsets. (Satellite Pro S300M-S2142 if anyone is really curious).
The hard drive light stays on for about 1:03 minutes and then it turns off, at 2:08 minutes - the Power light finally turns off and the thing finally shuts down. I've tried adding acpi=off, but that just gets me a kernel panic on startup and acpi=debug all I seem to notice is "Malformed early option 'acpi'" in messages and dmesg. How consistant the power off time is makes me think there's a timeout of sorts going on, but I have no idea on how to track that down.
I am using Fedora 12. Prior to this I was using Ubuntu 9.10. In Fedora 12, I am facing a problem with battery power. Sometimes when it is fully charged I remove the power cord, battery power comes down to 40%-41%. It never happened with Ubuntu, which gave quite a good battery performance. My question is when it is showing Laptop Battery 100% i.e. fully charged, if I remove the cord why it comes down to 40%-41% (and always in this range).
View 8 Replies View RelatedMy PC lost power while updating. After booting, I run update once again and everything seems to be fine, except the message "could not do simulate: coreutils-libs-8.4-8.fc13.i686 requires coreutils = 8.4-8.fc13 : Success - empty transaction".
When I try using "yum update", I receive the error message below.
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
[Code]....
I'm using Fedora 12 with LXDE (sudo yum groupinstall LXDE if you want to try it), and while using LXDE rather than GNOME, the power button doesn't do anything. I found a possible solution here: [URL] but I have no /etc/acpi/ folder. Why is that? Package acpid is needed.
View 2 Replies View Relatedhere is the problem I am facing. My system [ fedora 11 with all updates installed as of nov 27] suffered a power interuption.[ well that happens I dont have an UPS] here is what happen then
1- when i restarted i get stuck with the "install problem with gnome power manager" that prevent the desktop to launch. I found this to be well documented and I ssh'd [ for some reason cannot get the consol] my system and tried as root to remove gnome-power manager with yum remove power manager ... well the command hang out doing nothing and I have to close the session and reconnect... CTRL C dont even work.
So I had another problem. I started checking my system and when I tried df, I received the shocking following answer
[Code]....
it doesn't do anything critically wrong.it shuts down, starts up, suspends, restarts, etc, rather well.only thing is that, altho' I set the settings to never hibernate and to never put the display to sleep, it does. I't's annoying, since I can't whatch a movie in peace, for instance.
View 1 Replies View RelatedI Run Fedora 11 and i have problem after shutdown computer. My computer cant power-off, just show "System Halted".
PC Model : Compaq Presario SR1400CF Desktop PC.
When I change the "Put display to sleep when in active for" it seems to make no difference. The screen goes to sleep when it wants. Some times in the middle of watching a dvd (after about 10 mins when it is set to 1 hour).Could this be done by terminal, perhaps there is a problem between entering in the GUI and actually telling the machine.
View 1 Replies View RelatedI had a power failure during the portion of the upgrade after the reboot where it was upgrading the packages.I tried restarting the machine with the upgrade line in the bootloader but it says it cant find the bootloader. So I rebooted into the working install and ran preupgrade again, and after it reboots, it gives an error the it cant find "root" of the previous installation.even thought the machine boots and works, I cant tell what state I am in. the boot option lines, shows a fc12 kernel designation and the "about this computer" says "release 13"Also the add remove software doesn't show anything.
View 12 Replies View RelatedI installed Fedora 13 (KDE) version: Linux version 2.6.33.5-124.fc13.i686.PAE latptop: toshiba satellite C650 - intel core i3 I have few problem, one of them is the power management it seems the power management can't see the battery therefore not battery status. power profile isn;t working. after shutting down the system, the computer stays on (screen, hdd ..etc) until I press the "turn on button". also I cant change the screen brightness using power management..its fixed.I dont know whats the problem and i dont know how to fix it.
View 2 Replies View RelatedWhen I am installing texlive software suddenly power is switched off in the middle. Then onwards I am unable to update the system. And I tried to remove texlive but The error coming as texlive is not installed.
View 1 Replies View RelatedMy computer is running really slow after a power outage. It was fine, then the power went out. Now it's *unabably* slow. The OS takes a long time to load, the simple calculator takes a few minutes to show up, Firefox doesn't even load at all before I give up. And it won't shut down normally. I have to use the power button.
So did the power outage fry somthing on my PC. Do I have ot replace RAM or the processor? Or is it a software issue? Do I have to do something as drastic as a reimage?
completely new to fedora but a long time ubuntu user. I never got my wacom bamboo touch to work correctly in ubuntu and I was wondering since I'm already installing Fedora 12 on my 15" PowerBook G4 why not give it a whirl.
View 3 Replies View RelatedI just completed a clean install and update of Fedora 14 on a Dell Precision 490 (4G of RAM, Dual Xeon 5140 CPUs).The system has all of the current updates applied and seems to be running normally, but it will not complete a shutdown/poweroff or restart. It gets hung with Restarting... in the upper left corner of the screen and stays there until I force the system to power down.I have searched quite a bit for related problems but have come up empty. Its kind of hard to debug because the system does not respond when it is in this hung state and there does not appear to be any relevant info in /var/log that I can find.
View 3 Replies View RelatedI just did an upgrade from F13 to F14.[*] Now, power management (in Gnome) does not work any more. For example, when pressing the power button, there is just a 'Cancel' button (no button for shut down, suspend, hibernate), in Gnome menu there is no possibility to shut down, and in 'gnome-power-preferences' most options do not work at all. For example, there is no other option than 'Blank screen' for 'When laptop lid is closed' action. When starting 'gnome-power-preferences' with '--verbose' parameter, I get following error messages:
Code:
Cannot add option, as cannot suspend.
...
[code]....
based distros but never tried it in others. I am wondering if I can complete this guide in Fedora 15. In order for Linux to be my primary OS (Which I'd really like it to be) I need to be able to see how much battery power I have. If all the packages are available how I can download them and what not so that I can get my battery power back up.
Here it is: [URL]
How to disable the power management in fedora 12, so that lcd/monitor should not go to sleep/off when system is idle?
View 3 Replies View RelatedI've just [up?]graded from F14 (Fedora 14) to F15 - actually a fresh install, - but now I don't know how to set Power Management in F15.
Are there any F15 users out there that use Power Management?
I'd like my laptop to run when the lid is closed instead of going to sleep and stop the hard drive from spinning down, because it's got hardware encryption on it and it doesn't like to sleep and then be woken up. In fact, I'd like to completely avoid any kind of sleep.
It looks like Fedora 15 is quite fancy but missing a lot of basic features that even Fedora 14 and earlier had (unless I'm somehow unable to find these features in an obvious place). If I can't figure out how to do power management I'll have to upgrade back to F14.
I have a client who has for the last four years been running a Red Hat 4.1.18 Server with absolutely zero problems. Yesterday somebody had a problem with one of the attached Windows PC's and some genius decided to reboot the server. By genius I mean idiot and by reboot I mean pull turn off the power to the box.
When they tried to reboot, they get a kernel panic. This is what the screen says;
Uncompressing Linux... Ok, booting the kernel.
audit(1009912323.849:0): initialized
Red Hat nash version 4.1.18 starting
File descriptor 3 left open
Reading all physical volumes. This may take a while...
/dev/hda: open failed: No medium found
No volume groups found
File descriptor 3 left open
/dev/hda: open failed: No medium found
No volume groups found
File descriptor 3 left open
/dev/hda: open failed: No medium found
No volume groups found
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init!
The server runs the database for their entire POS system so they are now dead in the water. I'm stuck, I've never come across this before. What do I do to recover this?