I have a fedora 11 machine set up in a class room. Every time I plug the Smart Board in, the mouse jumps to the top left corner and every time I move the mouse it jumps back there again.As soon as I unplug the Smart Board the mouse goes back to normal.I have used the exact same Smart Board with a Fedora 10 machine without any problems.ideas on what could be causing this problem and how I could fix it
View 2 RepliesFor about a month now, my mouse has been jumping to one of the corners of my screen every few minutes (normally the top-left). I also had a problem where the right mouse button would double-click 90% of the time.
I just replaced my mouse a few minutes ago, and now the right button works fine, but the cursor keeps jumping to the corner of the screen.
I'm fairly certain this is not a hardware problem, since switching mice did not fix the problem.
Both were PS2 corded laser mice.
For some reason the mouse curser starts out in the middle of the screen after booting as normal but as soon as i move it, it gets stuck in the top left corner of the screen.It still responds to clicks and i can sometimes see it "wants" to move but itets repositioned into that corner.he problem exists in the live-cd session as well as in the installed session.I looked into the Xorg.0.log file and it said something along the lines of:Code:HID XXXX:XXXX: failed to initialize for relative axesI suspect this to be the culprit, yet i've never had any problems with the mouse in any other operating system (writing from kubuntu 9.10 right now) and i've used most of the popular ones.Is there anything i can do about it? Seems that X is doing things differently in Fedora... There's got to be some switch or something.
View 1 Replies View RelatedI finally got around to installing Fedora 15 on my HTPC. I noticed that the mouse cursor starts in the upper left corner of the screen as soon as the login screen appears. This means that after login, if I only used the keyboard so far, the Gnome Shell overlay starts immediately.This is at most an interesting quirk until I try to set XMBC to automatically launch. Now I have to press <Esc> or move the mouse to de-activate the overlay before I can use the program.Is this mouse cursor thing intended behaviour, is there some software fix, or is it a hardware quirk? I have a Radeon HD 4650 graphics card (Smolt profile).
View 1 Replies View Relatedis there a way to have gnome open in the upper right or left corner instead of the lower left corner when i start it?
View 3 Replies View RelatedI installed a game it worked then I opened it all my screen does is flash once then the mouse goes to left corner im running 10.10
View 2 Replies View RelatedIn OpenSuSE11.2 I followed this url to got it to work: Genius MousePen 8x6 It worked like a charm. In OpenSuSe 11.3 the Xorg stuff is different. In /etc/X11/xorg.conf.d there is a wizardpen.conf but when I use the tablet the mouse hits the top left corner. Using the settings from the url above doesn't make it work either.
View 4 Replies View RelatedWhen I move my cursor to top left corner a menu appears like tab menu. Like exactly this: [URL]
What's its name? I want to find its shortcut or give it one if none is assigned. But firstly I need to find its name
I recently installed Kubuntu 10.04 on a Toshiba Satellite 5205 laptop (which is prone to overheating, if it helps - it was on a platform in the back for airflow, though), which worked great for about 4 days.
Recently, I picked it up (looking for a USB port) and rotated it around a little bit. However, after this, the screen was darkened (not fully), and I could move the mouse for about half a second, after which it jumps back to the upper left corner of the screen. Rebooting doesn't help.
I have been trying hard to configure wizardpen for my ubuntu laptop.wed abletSetupWizardpen link for the info. Still it doesn't work. When I put stylus pen on the tablet, mouse pointer goes to the top left corner of the screen and stay there. Not sure what is going wrong.
root@salil-Laptop:~# cat /usr/share/X11/xorg.conf.d/70-wizardpen.conf
Section "InputClass"
Identifier "wizardpen"
[code]...
Biggest one that make game unplayable is mouse. Mouse isn't moving smooth it jumps around. I cannot shoot anything. So i asked for help, and everybody just say install windows. And where is fun in that. If people when ever run into problem with some software on linux just install windows. Linux would never go forward. I m not some great gamer, but i would like to be able to play this game. Probably somebody run into same problem. I sow that people talk about something like dis on WOW and wine but simptoms doesn't seem same to me.
View 1 Replies View RelatedI'm after fresh install of Fedora x64, did all updates. I have wireless pci card TP-LINK TL-wn510G (Atheros chipset) which was detected correctly.
Everything is working smoothly until I start to download from internet in firefox (or in konqueror - no difference). On increased network activity my mouse cursor starts to lag/jump when moving - it's almost impossible to do anything using mouse when there is file download. On minor traffic, like browsing webpages, I don't notice such behaviour.
I checked if its rather because of hdd activity not the network, but no - when copying big file on hdd everything works fine.
I'm also experiencing huge ssh lag/jitter despite the ping is low.
I fired top when downloading, but there is no process eating cpu in suspicious way.
I have a regular usb mouse.
On the same computer I have installed Win 7 and OpenSuse and nothing like this happens on that systems.
I think there might be a some kind of conflict between wifi card and usb mouse (they share resources) but don't know how to check/repair. Could you please tell me how should I proceed to check what is going on. I haven't modified any hw settings, the installation went w/o any errors.
Why you put off the button in the left down corner to hide/show all windows? It is the must button! How can I return it back?
View 1 Replies View RelatedI was trying to get a SMART board to work with my install of Lenny on my iBook G4. By work with, I just need it to display what's on the iBook's screen, I don't need any kind of interactivity. Since it is an iBook, it uses a PowerPC processor, instead of an Intel, and the SMART board driver only works on an x86 processor, I can't use the driver provided. Is there any way to get this to work? I imagine that I need to edit the X.org configuration file!
View 1 Replies View RelatedI have re-installed Fedora 3 times, each time, after a little while of use, when I am botting it up, it loads up, and before the login screen appears, the screen just goes black, and I end up with just a black screen and a white line in the top left corner flashing, thus resulting in me not being able to log in. The exact same has happened a number of time
Could it be something I had installed? Also, whilst using it, on the third install, a few times a message appeared telling me there was a kernel error, could this be linked to the problem? I was running Fedora in GNOME, but I had KDE installed too.
When I installed fedora 14 when moving mouse to the top right corner I would get all windows arranged one next to another on the desktop so I can choose between them. Now I don't have that feature any more.
Does it conflict with compiz, or is it one of compiz plugins? Which package is responsible for it and how can I get it back?
attempted to "install it to a USB memory stick". I am having a hard time recreating the actual steps that he took. boot the computer and "Missing Operating System" message in upper left corner of screen. Not good, I think. I insert the Max OS X install disk and boot holding the "c" key so the system boots from the CD. Instead of installing, there is a disk utility tool from the pull-down. It shows the system hard-drive and the CD/DVD drive. So far so good. When I look closer at the hard drive, there appears to be a single Linux partitiion. No Mac OS partition. I know enough about computers to know that if the Mac OS disk partition is not visible, there' s probably no easy way to retrieve the 1.5 years worth of family pictures, applications, website I had built, etc. My "best guess" is that somewhere along the way, when he tried to install Fedora to the USB memory stick, that he inadvertantly attempted to install it to the hard drive. best route to recovery?
View 14 Replies View RelatedI'm not sure if I should post this question in "hardware & laptops", or "Desktop Environments", because this is a hardware problem on a desktop computer.
Description of Problem:There is another thread that discussed this same problem that I'm having: However that thread is so old that the suggestions in it no longer work in Ubuntu 10.04 and for whatever reason I can not make a reply to that thread.As in the above thread, I've tried other input devices and rebooting the computer and using other USB ports, and my mouse still intermittently double left clicks randomly at times when I've only clicked the left mouse button once and at times and places when it should only produce a single click such as when selecting a drop down menu.
Has any one else had this problem, and does any one have any idea how to fix it or to trouble shoot this a bit more? Please let me know if there is any other information I can provide to further clarify or troubleshoot this issue.
when im scrolling webpages via scroll wheel the pages MOST of the time will move the direction they're supposed to
however occasionally it will blip and in the middle of a downward scroll it will abruptly scroll upward one or two clicks
( lol not the physical mouse ! but the page )
ive checked the forums and everyone has problems w the 6th and 7th buttons ... and not the scroll wheel
oh and there are specific drivers on the razer website .. but are those safe to use on ubuntu?
I have an Acer Aspire 5220 with and AMD processor and 1 GB of RAM. I had Windows vista and now have Dual Boot Vista / Kubuntu 9.10 clean install. Recently a blank white box appeared in the upper left corner of the screen. About 10-20 minutes after I log in it appears and disappears after 1-2 hours.
View 2 Replies View Relatedwhenever I hold a key inside or outside of an application my mouse doesn't respond for several seconds then jumps. (this is a big problem in First Persion Shooters) I assume its a problem with xorg.conf
[Code]...
When I open any application, instead of getting the application logo at the top left corner of the window, what I get is a button which on clicking drops down to provide me couple of options. I am using Ambiance Theme Can I move those options somewhere else on the top and get back the application logo at its place(which kind of looks smart and helps me differentiate between the applications in open windows faster) I haven't checked it in KDE but I am using Gnome(default with Ubuntu 10.04). And as far as I remember, when I was using KDE with Fedora 11(a month ago), I used to get the logo
View 8 Replies View Relatedwhile writing script to send popup to another user i exposed to little window that appear at the left upper corner.i don't remember which command do it
View 2 Replies View RelatedI've been having a problem with debian lately. It seems that sometimes a rectangular corner on the top left of my screen freezes and shows what was previously there. It goes away when I close all open windows but shows up again if I open multiple applications, especially if I open the terminal and another application. It can become very distracting and makes it impossible to see what is on the top left corner of my screen.
I'm including a screenshot of my desktop.
I am running Debian 8.2 Jessie on an Asus Q400A with 8 GB of RAM. I have an Intel Core i7-3632QM CPU @ 3.2GHz and am using XFCE as my Desktop Environment.
recently downloaded banshee and found it pretty useful. however in the notes for the latest release it says that there is an option to have the cover artin the lower left hand corner. i can't figure out how to get to work at all. i have ubuntu 9.10 and Banshe1.6 Beta 2.would anyone have ideas please? i've spent a couple of hours on this and theres nothing on the net.
View 6 Replies View RelatedI have a Windows XP Dell laptop that completely froze the other day. I cannot start it up, and cannot even access safe mode -- it just goes to black screen with underscore in the upper left corner.
So, I did some searching and saw a recommendation to create a Ubuntu Live CD to run and access the info on the hard drive, at least. I have most of it backed up, but not the drivers and I know that will be a pain to redo. So, I am mostly hoping at this point to recover a little info off the drive before reinstalling the OS. Of course, if I could just fix it, that would be better...
I get an error message when I try to access the hard drive through Ubuntu that says it is in hibernation mode and I need to start windows and shut it down properly before Ubuntu can mount the drive. Since I can't get into Windows, this is impossible. It also said something about being able to mount it read-only.
I have noticed that the initial ordering of icons of my desktop is leaving a blank space on the top left corner. Recently I have changed my language but I am not sure when this began to happen.
View 7 Replies View RelatedThis issue was solved On June 9th. Root cause was Kore 2 controller device being misinterpreted as a pointing device. I hope to eventually use the Kore as a straight-up MIDI controller in Ubuntu Studio, but that's a long way off. For now I will unplug it whenever I boot Ubuntu Studio. XINPUT LIST gave me the hint I needed to figure this out. Original post and problem resolution thread follows:
I'm a total Linux newbie, but well versed in Windows. Just installed Ubuntu Studio 10.10. This was a clean install, not an upgrade.. Installation went fine, but when I boot into it, I get the cursor stuck at the upper left corner of the screen. When I move the mouse, the cursor will move, but it immediately jumps back to the upper left corner. I can't select anything except to open the main menu. Then I must use keyboard cursor control to navigate.
[Code]...
I just installed openSUSE 11.3 on an old NEC Powermate. After rebooting the first time, the green startup screen with the chameleon is reduced to about one third of the screen surface and sticks to the upper left corner of the screen. Graphic card is an old NVidia Geforce FX4000, which I've been using before using NVidia's legacy drivers. I've been running CentOS, Slackware, Debian and Gentoo before, but right now,looking for a more "comfortable" distro that "just works" (or : almost just works). I don't mind having to do a little tweaking.According to /var/log/Xorg.0.log, the 'nouveau' driver is used for this card
View 2 Replies View RelatedI have my laptop connected to an external monitor and in the upperleft hand of both screens is an identifier that wont go away and is blocking my view. On my laptop it says "Laptop" and then "Dell 20"" on my secondary display. just want to get rid of these labels. I have checked and unchecked "Show monitors in panel" and that seems to be my only option.
View 5 Replies View Related