Fedora Hardware :: No Sound When Using HDMI Port
Jul 26, 2011
I have a Laptop with Fedora 15, with an NVidia graphic card, when I attach my TV screen as secondary screen using the HDMI cable video works perfectly, but sound comes only from my laptop's integrated speakers; if I open Pulse configuration and set to "HDMI output" profile, no sound comes from either the TV set or my laptop's speakers.
I've tried checking the .conf file, updating NVidia drivers, and anything that I have read in this forum but I still have no sound from the TV set when I use the HDMI cable.
View 9 Replies
ADVERTISEMENT
Nov 20, 2010
Having some problems with HDMI-Audio on my HTPC: I don't get sound out of HDMI port! For system info look there: Sysprofile
OS is Suse11.3 64Bit with KDE now!
At "System-Settings/Multimedia/Audio Output" there are the following devices in the given order:
HDA NVidia (ALC662 rev1 Analog)
HDA NVidia (ALC662 rev2 Digital)
HDA NVidia, NVIDIA HDMI (HDMI Audio)
That's consistent with the connector layout of the mainboard. Playing "Test sound" while marked the HDMI Audio is not causing any output with HDMI, while analog works just fine!
I also installed the nVidia prop drivers with the packet manager.
In YAST there is one card found in the sound section::
Idex=0 and Card Model=MCP79 High Definition Audio
View 9 Replies
View Related
Dec 1, 2010
Acer Aspire 5820 TimelineX, Mobility Radeon 5650, running open source radeon drivers. Laptop has VGA output (haven't tried it yet, will later tonight, I suspect it works) and an HDMI output. Monitor connected to laptop through HDMI causes garbled picture (either a set of lines made of little square blocks or a pink vertical line running down the leftmost edge with white, dashed horizontal lines travelling up the screen from the bottom to the top and repeating). The previous happens at startup, the latter happens if I disconnect the monitor and plug it back in again after logging in.
Running KDE 4. HDMI port is not detected (does not show up in gnome-config-display or in krandr or in xrandr). It does show my laptop's built in screen and my VGA output, but does not list my HDMI output anywhere. HDMI seems to show up in a message in dmesg, but other than that, no.
Included is the output of a few commands. All commands were run with the monitor plugged in to HDMI. 'monitor-probe-using-X radeon' failed with "Unrecognized option: -probeonly". Monitor does not display anything if plugged in on startup (some people got something, then it disappeared when X started). I haven't played with Xorg.conf yet, I'm not sure what to write for HDMI output. I haven't tried the fglrx drivers yet ((*shudders*)). I can't get any info on this problem, other people have had similar issues but they had trouble with getting a particular resolution to work or no sound through HDMI. I don't care about sound, just want a picture. Monitor is an LG Flatron L246WH. I can use VGA if push comes to shove, but I'd really like to get HDMI working.
View 4 Replies
View Related
Feb 21, 2010
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
View 4 Replies
View Related
Jun 7, 2011
Well almost no sound. The only way to get sound out is if i use the following command
speaker-test -D plughw:0,7 -c 2 /dev/urandom
I have the following line in /etc/pulse/default.pa
load-module module-alsa-sink device=plughw:0,7
But when i play any applications i hear no sound. For example "mplayer zion.mp3" results in silence.
When using pavucontrol, i see the sound bar moving for the hdmi hardware device. But i still hear nothing.
Does anyone know what could be wrong?
View 1 Replies
View Related
Dec 30, 2010
I am currently using an Nvidia GTX 460 gpu, but I just cant get the sound to output to my monitor through the hdmi. I can see that there is sound coming out when running pavucontrol. And I've looked at other guides and no luck. Here is the link to all of my alsa info If you need any more info just let me know,
View 14 Replies
View Related
Apr 16, 2011
I do realize, that there are a lot of other threads regarding this problem. I've spent almost the whole day today reading and trying them out, and at the end, I figured out, that none of them worked for me.
So, I'll provide as much info as possible... code...
Unfortunately, none of this worked, and even after the first 2 methods I didn't have ANY sound at all!
Please help me, I need this in order to have my speakers plugged into the monitor, so I can control the volume via the remote control.
In order to dissolve any suspections to a defect hardware, I'd like to add, that this is perfectly working under Windows 7, 64-bit edition.
View 2 Replies
View Related
Jun 3, 2011
I upgrade from F14 to F15 and at first everything seemed fine, but now I noticed that sound output over HDMI to my TV is no longer working (this worked fine under F14). the hardware in this case is the onboard sound card of my ASUS M3N-H/HDMI motherboard:
Code:
>lspci:
...
[code]...
View 1 Replies
View Related
Oct 8, 2010
I have a system with an on-board S/PDIF output (the one I want to use) and a ATI graphics card that has an HDMI output and therefore an own audio device./proc/asound/cards shows me the following:
Code:
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe7f8000 irq 16
[code]....
View 4 Replies
View Related
Aug 5, 2010
Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies
View Related
Mar 19, 2011
I have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
View 4 Replies
View Related
Nov 9, 2010
I have an Acer Aspire 5542 & I decided to move from Ubuntu to Debian Squeeze .Everything is working fine bar the hdmi port .When installing Squeeze I used the Radeon driver (open source one,),That installed correctly but when I select dual monitors the OS picks it up but the TV itself just stays black.The graphics card is Ati Radeon HD 4200Here is my xorg.conf file
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code].....
View 1 Replies
View Related
Sep 12, 2010
recently installed an NVidia GeForce 240 in my HTPC, and finally got it working correctly (as an HDMI-out display) n Lucid Lynx 64-bit.My problem now is that there is no sound, even though sound should be passing through, and I don't know where to begin to fix the issue.
View 4 Replies
View Related
Jul 28, 2009
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies
View Related
Feb 8, 2011
I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
View 10 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Sep 22, 2010
Can someone provide me with the exact instructions I need to backtrace pulseaudio? I have a bug that a developer is asking me to do a backtrace and the instructions on the ubuntu site aren't very good. I tried exactly what it said and my problem is that it says to "run the program under gdb by doing
gdb pulseaudio 2>&1 | tee ~/gdb-pulseaudio.txt
unfortunately pulseaudio isn't actually starting when I do this (I kill the program before I do this command, I also add the appropriate text file so pulse doesn't auto restart). Not sure what's going on but I'd appreciate any help as I can't get sound out of HDMI (I get it but it dies out fast).
View 3 Replies
View Related
May 11, 2010
For my mythtv/router box I'm trying to get the sound working trough hdmi as well as over the analog out. Because the HDMI is located on the mainboard and has something to do with the video driver I downloaded and installed the following:
ATI Catalyst™ 10.3 Proprietary Linux x86 Display Driver94.2 MB10.44/28/2010
However the output aplay -l is showing me(I got hdmi sound working on my laptop) isn't the same as on my laptop, it does not show the hdmi "sound card"
here is the output:
Code:
~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
[code].....
I prefer sound trough hdmi but for the HDMI to work I previously needed to be able to see the HDMI device listed by aplay -l
View 1 Replies
View Related
May 29, 2011
HDMI outputs video but not sound from my Acer Aspire 5738 laptop.I have tried both SMPlayer and VLC setting both audio outputs to HDMI.Those media players have always worked for me using other Linux distros.Is there another media player that I should be using?If it's important;lspci lists;Audio as ATI and Video as ATI Mobility Radeon HD 4500
View 2 Replies
View Related
Jul 9, 2015
I can not get any sound through my HDMI cable. Sound through my headphones works fine. But when I want sound to go through the HDMI and play on the monitor, there is no sound.
The HDMI cable is connected to my Radeon R9 270X graphics card.
My OS version is 8.1.
It works on Windows 8.1, so it is definitely an operating system problem.
View 8 Replies
View Related
Dec 15, 2015
I'm on Jessie, and use KDE.
Sound keeps coming from laptop's speakers, even when HDMI is connected to an external TV.
I've tried to fix this issue using both Pulse Audio Volume Control and KDE's System Settings -> Multimedia -> Audio and Video Settings. No luck. I've read several topics around, but there are plenty of variables to consider.
View 5 Replies
View Related
Jun 19, 2011
I have a Jetway "NVIDIA MCP7A-ION mini-itx for ATOM processor" board (whatever that may mean :-) -LF.pdf with HDMI but no SPDIF.How should I be able to produce some sound over HDMI?Here are my findings so far:
Code:
>aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
View 8 Replies
View Related
Feb 7, 2011
Configure HDMI Sound on Acer N282.
No sound HDMI.
ALSA information is located at [url]
View 9 Replies
View Related
Jan 1, 2010
Trying to put up my HTPC with Ubuntu 9.10 but I cant get any sound to work. Im using a HDMI cable between the pc and TV. Computer is an Asrock ION HT/BD 330. Also running a 64 bit version of Ubuntu. I have upgraded all I know or think I know what to do but still with no luck. To start of heres my multimedia.
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:fae78000-fae7bfff
my cat /proc/asound/version is as follow
Advanced Linux Sound Architecture Driver Version 1.0.22.
Compiled on Dec 17 2009 for kernel 2.6.31-16-generic (SMP).
My lsmod is as follow:
Module Size Used by
vfat 13184 0
fat 59832 1 vfat
binfmt_misc 10220 1
ppdev 8232 0
snd_hda_codec_nvhdmi 6304 1
snd_hda_codec_realtek 288292 1
snd_hda_intel 30208 0
snd_hda_codec 96384
My modinfo soundcore is as follow
filename: /lib/modules/2.6.31-16-generic/kernel/sound/soundcore.ko
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
srcversion: 3A50BBE947364A4D9DB6A97
depends:
vermagic: 2.6.31-16-generic SMP mod_unload modversions
View 7 Replies
View Related
May 20, 2010
I have an HP 8510w laptop and I run ubuntu 10.04 out of an external harddrive.
I have no problem getting video over hdmi using the latest proprietary nvidia drivers however I cannot get sound through the HDMI cable.
I have read around without being able to find a solution.
Running "aplay -l" shows only my intel sound card and also there is no hdmi sound interface in the sound preferences (Only the normal output interface).
I am using the latest proprietary nvidia drivers (Believe it to be 1.95) and the graphics card is a Quadro FX 570.
how I can get sound out to work via the hdmi cable?
View 3 Replies
View Related
Aug 29, 2010
I put a hdmi cable on my note, I turned on the TV and ran to is a beauty but when I turned on the video ... the sound did not come. I went to System -> Preferences -> Sound and changed the output to "Digital Stereo (HDMI) output. And no sound came out. The boxes of note works perfectly.
Here follows some details of the hardware:
Code:
aplay -l
Lista de Dispositivos PLAYBACK Hardware ****
placa 0: Intel [HDA Intel], dispositivo 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Dispositivo secund�rio: 1/1
Dispositivo secund�rio #0: subdevice #0
placa 0: Intel [HDA Intel], dispositivo 3: INTEL HDMI [INTEL HDMI]
[Code]...
View 2 Replies
View Related
Nov 12, 2010
I have recently installed Ubuntu 10.10. Everything is working fine except I have no sound. When I use the command 'aplay -D hw:0,0 somefile.wav', I can get sound through headphones attached to the headphone jack. But I can't get any sound through the speakers. This is a dual boot desktop and the sound works fine under Windows, so no problems with hardware. The PC monitor is connected through a hdmi cable and I would need sound through the speakers. The output of alsa-info.sh is at
HTML Code:
<a href="http://www.alsa-project.org/db/?f=cb172534097c313b25836f77f2a40fef857102ba">alsa-info.sh output file.</a>
View 9 Replies
View Related
Feb 8, 2011
I'm using an HDMI connection, and the sound connection is unreliable at best. When it works, it is working fine, then all of a sudden (maybe because it isn't being actively used for an extended period of time)the sound connection vanishes. When at System --> Preferences --> Sound --> Output I'm not seeing any option for the HDMI connection currently and the sound is not working. All the volumes are unmuted and I cannot use a softphone nor .....,nor do videos that I have watched in the past with sound have any.
Last night when this happened, I rebooted and the sound was working just fine then. In the past, I was able to get the computer to recognize the HDMI connection has sound by momentarily unplugging it, then plugging it back in. Though both last night and today that hasn't worked.When I bought my computer, I had Windows 7 installed on it. The same thing was happening then, though it was always fixed via disconnecting the HDMI connection briefly, so there is the possibility of it being a hard ware issue.
I've also tried turning off the device (a HDTV in this case) and turning it back on, but that only solved it once or twice, and neither last night nor today.This is also a 64 bit computer, should that be relevant. Using Ubuntu 10.10, and the only available update to my system at the moment is Google Chrome, which I will be updating after this post.I will be restarting my computer after that update and posting back here if the sound is working, especially with note of whats listed at the System --> Preferences --> Sound --> Output if there are any additional options (from memory, there was an HDMI choice there).
View 4 Replies
View Related
Mar 5, 2011
Im trying to get the sound working via HDMII have a HDMI cable connecting my nvidia video card to the monitor... even i say the apps to output the sound through the device 1,3 , i dont get any sound..
View 2 Replies
View Related
Jun 9, 2011
I recently purchased a new video card a GeForce 550 Ti, but I haven't been able to get sound working over HDMI.
I'm running the latest version of Ubuntu (11.04) and have installed the proprietary drivers through Additional Drivers.
Code:
The card is being picked up by alsa and I've configured Ubuntu to use HDMI in sound preferences:
aplay -l:
Code:
When I check alsamixer this is what I see:
ALSA reports that version 1.0.23 is installed, although I thought 11.04 came with version 1.0.24?
cat /proc/asound/version:
Code:
I've tried purging ALSA and reinstalling it but it didn't help. Is there anything I can do? Does anyone know if this card is supported by ALSA properly yet? I hate the thought of having to go to Windows to get this working
View 3 Replies
View Related
