I wasn't able to fix it... poor Lappy ), and everything seemed to be going just swimmingly. Then, when I was testing out one of my old scripts in Octave today, it barked at me about needing epstool to print plots to file.
[Code]...
I installed Fedora 12 at school on my external hard drive, using Windows Virtual PC 2007 to run Fedora at school on a dell PC with XP 2000, which works at school!However at home, i am using Windows 2007 os, I install Windows Virtual PC 2007, wasn't successful in running Fedora 12.As soon as Fedora begin to boot, an error message appeared which said,"An unrecoverable processor error has been encountered.The virtual machine will reset now".below the message it gives you only option to reset the virtual machine, however this is a vicious cycle
View 1 Replies View RelatedI got the error: "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have edited the options in installation screen with adding noreplace-paravirt at the end of boot parameters. but still have this error and FC installation does not continue.
View 11 Replies View RelatedI been havin a problem whit the installation of fedora 12 on virtual pc, gives me the error:
"An unrecoverable processor error has been encountered.The virtual machine will reset now."
I am trying to run Fedora 14 from Virtual PC 2007 on Windows XP. Every time I try to boot it, it flashes some code and shows a blue screen with the Fedora logo for a fraction of a second. It goes to an ms-dos type screen with a white background and a single "[" in black. Then I receive an error saying "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have googled many times and have scavenged the Fedora site for a solution, yet I have not found one for Fedora 14.
View 3 Replies View Relatedi have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedSince there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
"The installer has encountered an unrecoverable error.A desktop session will now begin so you can investigate the problem or try installing again".It didn't get as far as giving me the option to check cd disc for defects, try without installing etc.9.04 and 9.10 installed fine on my two hard drives, so presumably this is not a hardware problem. During a desktop session I noticed a prompt to install proprietary drivers (graphics?). Could this be the problem? I don't have anywhere near the knowledge to 'investigate the problem'.
View 1 Replies View RelatedI am developing palm in my ubuntu 10.04 . unfortunately i have install a empty palm file. now i can not remove it or remove the virtual box. because it gives this error
View 3 Replies View RelatedQuote:dpkg: unrecoverable fatal error, aborting: failed in buffer_read(fd): files list for package `sysvinit-utils': Input/output errorE: Sub-process /usr/bin/dpkg returned an error code (2)This is the error i get when i try to update my system, fresh install of ubuntu 9.10
View 2 Replies View RelatedI'm a first time user of xubuntu or any other linux derivative operating system and I was wondering if I could get some assistance on installing xubuntu 11.04 on my old laptop. When I downloaded the iso and burned it into a DVD+R, I inserted it into the machine and let it ran. It started well and I checked the disc's integrity before continuing with the installation and it passed that. Now, as I enter the installation screen, I select my language then click forward but the installer freezes for a few minutes and later disappears only to be replaced with an error message, "The installer encountered an unrecoverable error. A desktop session will now run so that you may investigate the problem or try installing again." and it does as it says and boots into a demo mode. I try installing again through the "Install Xubuntu.." link on the desktop but it follows the same problem.
My laptop's specifications are as follows:
ACER TRAVELMATE 290
256 RAM (240 usable)
Intel Pentium M processor 1500 MHz 599 MHz
Video card: 64 MB internal Intel 82852/82855 GM/GME Graphics Controller
Sound card: Realtek AC97 Audio
I'm installing 10.04 using Wubi, Wubi finishes and asks if I want to reboot, I reboot and select Ubuntu. The installer seems to progress, however later the following pop-up appears
"The installer encountered an unrecoverable error and will now reboot"
I'm getting the following error when booting from the 10.04 live CD: Installation Failed. The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.
I checked the CD for defects, and even tried re-downloading/burning to a new disc, but got the same problem. I tried booting in to the LIVE session then installing from the desktop but I still got the same error. I have had 9.10 running on here fine, and after running a Kubuntu 9.10 disc I had to hand to check it would work, that installed fine (hence the auto-partitions you will see in my info dump below). Here is some information about my system, let me know if I've missed anything. I've also included a copy of the syslog below.
[Code]....
I seldom mess with Wubi because I prefer a true dual-boot but due to a recent reply in the following bug report I thought it might benefit Colin Watson to have a first hand source of the problem:[URL]Then "bcbc" replied in post #273 and shortly after the thread was closed Now, I've had precious little time to do much testing and such lately due to an overdue remodel that was needed due to a kitchen fire over two years ago, and weather related problems have just nailed me big time to-boot, so I'm sorry if I seem more scatter brained than usual, but such is life.
Anyway, I did as "bcbc" suggested but it appears that Verbose Mode is no longer supported in 10.04 Wubi I do not currently have a working camera to take a shot of the options provided if hitting Esc after the initial install but it just drops me to a grub> prompt.I've tried disabling every bit of the Win XP security, defragging, reducing and increasing the default size of the Wubi install, etc, etc, etc!Any Wubi experts out there?I'd like to test for regression regarding those grub2 updates but I can't unless I can install 10.04 Wubi on this test machine Also, I can't currently network more than one computer, so ssh is just not possible. I have no room! The moral of that story is to NEVER live in a home while you're remodeling
This morning when attempting to upgrade (aptitude update; followed by aptitude safe-upgrade) my system I started receiving the following error:
Preconfiguring packages ...
(Reading database ... dpkg: unrecoverable fatal error, aborting:
unable to open files list file for package `apache2-doc': Stale NFS file handle
E: Sub-process /usr/bin/dpkg returned an error code (2)
A package failed to install. Trying to recover:
It doesn't seem to matter what repository I use or what particular package that I attempt to upgrade (all or just a single package). (In particular, apache2-doc is not even a package being upgraded, although it is installed on the system.) I have rebooted, run apt-get clean, run apt-get check, etc. to no avail. I am running a standard Debian (5.0.2/Lenny) desktop PC and am not running any NFS processes, client or server.
I have a PDF document that I need to rotate page through 180 degrees.
Can anyone tell me if Ghostscript can do this and if so how?
I've gone through the documentation and can't seem to find anyting on it nor Google
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
I am trying to install 10.04 32bit onto a new 1.5TB harddrive. I had previously installed 10.04 64bit on an old drive in the same nmachine. I partitioned and formatted the new drive using the old system. I have a couple of windows partitions and restored Win2K images to them, 4 formated Ext3 partions for whever flavour of Linux appeals to me a swap and two huge NTFS Data (home) and work areas. I installed Grub on the new drive, it also has its own partition for boot config files. The old drive has now gone.
Grub2 boots OK and gives me option for all the OS's even the one that are gone, thats OK I can fix that later with grub-update. Win2K boots fine and I see my NTFS partitions.
Now I boot from the Live i386 CD and chosse to install Ubuntu. The only thing that not allowed to default is where to install. Specify partition manually, Choose a spare 20GB Ext3 and the swap is already there too. I let it reformat to Ext3 and mount as /. (In Advanced I let the install boot loader default to ticked on /dev/sda )
The install goes OK until I hit the pop-up "Installation Failed". The installed encountered an unrecoverable error. A desktop session will be run etc etc..
I have tried this at least 10 times no. I downloaded and cut a new CD even though the old one worked fine on another box. Tried unticking the boot loader. Disable the floppy, removed the floppy.
I am relatively new to Ubuntu. Where do I look for the cause of the problem? I'll cut and paste the install log files in a moment.
I was intending to do a clean install of 10.04.I have downloaded and burned desktop-i386.iso.After booting from CD and selecting install from the menu, I get the splash screen for a few minutes, then black screen, then purple ubuntu screen, then the error message "the installer has encountered an unrecoverable error. A desktop session will now be run etc.....".
I am thinking this may be related to ACPI, because when i 'Try Ubuntu without installing' it loads ok but I get a 'Crash Report' notification on the panel.
If again 'Try Ubuntu without installing' with F6 option "ACPI=Off" it loads up with no problem.
Another thing I noticed is that when I load with ACPI=OFF, my external drives automount, but if i dont turn ACPI off, and get the Crash report notification the external drives do not automount.
Compiling ghostscript (9.01 or older) on a SUSE-11.3 does not include the x11 devices.gs -h does not show x11, x11alpa, x11mono, etc.Compiling on an old SLES-9.3 all x11 devices are included.On the old SLES-9.3 there is a library /usr/X11R6 with subdirs lib and include.Apparently including x11 devices depends on the libraries in /usr/X11R6.Question 1: how do I compile ghostscript on suse-11.3 with x11 devices included? The option --with-x does Question 2: where can I get the appropriate /usr/X11R6 for SUSE-11.3?
View 1 Replies View RelatedI'm trying to convert a jpg to eps with ghostscript using the command
Code:
gs -sDEVICE=jpeg -dJPEGQ=100 -dNOPAUSE -dBATCH -dSAFER -r300 -sOutputFile=file1.jpg file1.eps
but I'm getting the error message
Code:
Error: /undefinedfilename in (file1.eps)
[Code].....
Similarly to this question:Convert a PDF to greyscale on the command line in FLOSS?I have a PDF-document and want to convert it to pure black and white. So I want to discard halftones. To convert to grayscale with ghostscript I can use this command:
gs
-sOutputFile=output.PDF
-sDEVICE=pdfwrite
[code]....
I'm trying to get GS to print to network Windows printer, but somehow fail to do so . I managed to print through CUPS to that printer but if I use GS with -sDEVICE=cups nothing happens, nothing is printed, CUPS logs remain unchanged... I also found command using smbclient (gs ... | smbclient //machine/printer -U user ... -c 'printmode graphics;print-') but that one fails with "session setup failed: NT_STATUS_REQUEST_NOT_ACCEPTED" Here is why I need it, so maybe you know better way: We need to print thousands of PDF files in one print job (to prevent anybody else to send something else in while we are printing this). I was trying to develop small C program using GS API to achieve this but somehow I fail on something as trivial as print something on shared network printer.
View 3 Replies View Relatedim using cups filter 'texttops', to generate postscript file, then I;m using ghostscript to create pdf file. The problem is, that file generated from texttops don't contain landscape orientation instructions. How can I force ghostscript to do that. Here is the command Im using:
gs -sDEVICE=pdfwrite -sOutputFile=<outfile> -dBATCH -dNOPAUSE -f <infile>
I've found on the internet these instructions, but they don't work for me:
gs -dBATCH -dNOPAUSE -sOutputFile=myfile.pdf -sDEVICE=pdfwrite -dAutoRotatePages=/None -c "<< /PageSize [612 792] /Orientation 3 >> setpagedevice" 90 rotate 0 -612 translate -f myfile.eps
[code]....
I know Ghostscript can convert PDFs to JPGs, and in the case of a multi-page PDF, can rip each page to an individual JPG. But is it possible to have it rip them to one JPG, so that the pages are pasted below each other, e.g. the top half of the JPG is page 1, the bottom half is page 2? Or do I have to use another program (and can ImageMagick do this?) to combine the JPG pages into one image?
View 2 Replies View RelatedI have to send a FAX (as some recipients are about 20 years behind the times). Sometimes the document looks excellent on the screen, but what comes out the other end looks terrible. So I'm trying to come up with a way to produce the best quality FAX from a vector PDF (which is searchable with images and text). Part of the goal is to preview the fax in advance, so there are no surprises. I start by converting the vector PDF to a raster (bitmap) postscript document:
[code]...
How can these steps above be improved?
I've spent hours trying to scan + shrink a multipage PDF documentlosing readability. This is the first time I've ever needed to do this! (I had to scan each page as ".jpg" in order to email and open on another computer, so I could not scan to PDF directly, which I think is why each page was so large; lower DPIs made the text too blurry.)I found this great tip on UbuntuGeek...but anyone can do this if GhostScript is installed:
View 1 Replies View RelatedAfter upgrade to ghostscript 9.02 from current all print jobs fail with: 'There is a missing print filter for printer HP_F2480'
The printer is an All-inone deskjet F2480 and the cups printer queue has been
setup with the hplip tools. Before the upgrade it was 'working' with quite a few bugs...eg image not printed correct, multipage printing garbage. (page for page printing was the workaround)
Do I need to remove the printer and define it again?
When I plug in a USB drive and delete some files, there's no indication I can empty the recycling bin. The files aren't visible anymore in thunar, but the space isn't available to use. I end up having to format the drive to get my space back.If I open a terminal and go to /media/NEW VOLUME/.Trash-500/files I can see the files and folders that should have been deleted.
I'm using a net install of openSuSE with the XFCE environment, and I've never had this issue on a clean gnome install or any other desktop. I'm also using kernel 2.6.38-30-desktop.
the other day my Dell laptop completely crashed, rebooted, got a DST error, tried to run a dskchk off the Windows Boot CD, failed due to "unrecoverable files". Then booted off Ubuntu to salvage my stuff, which seems to work fine, and I can even see my HD - "120 Gb Drive" or whatever it says. When I open it, I see 2 folders: windows, Epson, and 2 random files.
Here's the thing. It says 108/120 gigs are taken, which is just how I left my HD with all my stuff on it that I am trying to recover. Yet my personal and important documents (pictures, videos, documents and even music) are NOWHERE to be found and searches bring up nothing. yet it says the disk space is taken...I am at a total loss.