I am working with FC14.
Code:
[gastonv@gastonv ~]$ uname -a
Linux gastonv 2.6.35.6-48.fc14.i686.PAE #1 SMP Fri Oct 22 15:27:53 UTC 2010 i686 i686 i386 GNU/Linux
I have downloaded POILoader for my Mio GPS.
[Code].....
i need to install a .dmg file on Ubuntu, is this possible?
View 8 Replies View RelatedSince ugprading today to a fresh install of Xubuntu 11.04 I am unable to open .exe's through Thunar my file manager with 'WINE Program Loader'
Wine 1.2.2.
When I try to i receive the error:
Quote:
The file '/media/DUMP/Downloads/anything.exe' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit.
When I check the permissions tab of properties there is no option to make it executable as per screenshot.
Also using chmod +x doesn't change anything but I am able to open .exe using WINE in the terminal but I would rather I did not have to do this every time I use WINE.
I have no intention of using mIRC, it was just a small windows installer I downloaded for testing.
I am new to fedora and installed wine to see if I could get the sony reader software working (required to access sony bookstore from my sony ereader). Well the program did not work though it did create icons on my desktop. wine kept crashing and I said lets just get rid of it. I uninstalled wine via yum remove and nothing appeared to happen so I did rpm -qa |grep wine and saw lots of stuff. So I simply did yum remove wine* and then a rpm -qa |grep wine was empty. however wine is still under applications on my desktop and still has a category for programs--reader. I should also mention that while wine was installed I attempted to remove the reader via the wine uninstalller but a) wine gave a message of a core crash and b) all the uninstaller did was give me the option to reinstall the reader program. so now when I attempt to open an epub it tries with the sony reader software. I know I can just right click to use another program but for now I want wine gone completely from my pc and the sony program gone.
View 2 Replies View RelatedI installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View Relatedwhen I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies View RelatedI have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
I didnt know where to ask this question but if anyone could direct me I would appreciate it.I would love! to remove the fedora Boot image progress bar when I choose to run Fedora, Is it possible to have this removed and just show my the inner working's like it did with older linux distros? where it has the lovely
blahBlah [OK]
blahBlah [OK]
blahBlah [OK]
[code]...
I really hope this is revelant here, and that someone can help. I have been using fedora for a while now, and I love it. However my brother has started using ubuntu, and wants me to at least try it, which I agreed to. I have created a partition for ubuntu, using Gparted, in fedora 13. My question is, how do i install ubuntu onto this existing partition, whilst keeping the Fedora boot loader, which I think is absolutely fantastic, and would love to keep. In summary; how to install ubuntu on an existing partition, and add it to the fedora boot loader options?
View 14 Replies View RelatedIs there a boot loader software in fedora?if yes, could you tell me the name?
View 6 Replies View RelatedI'm relatively new to linux. I got fedora 11 working as a dual boot on my computer a few months back. I accepted all Fedora updates yesterday. Powered down my computer at the end of the day, and today it won't run fedora. It gets into the grub loader and there is an extra kernel (Fedora 2.6.30.9-99.fc11.i586, Fedora 2.6.30.9-96.fc11.i586, Fedora 2.6.30.9-167.fc11.i586, Windows). Clicking on any of the kernels to load linux starts it up, the bar at the bottom of the screen goes from blue to white and fedora 11 lights up, but then the screen goes blank and I am never given the option to login. If I select the windows loader, I am able to get into windows. I have pressed escape or removed the quiet line in the loader, but haven't seen any errors on loading.
View 14 Replies View RelatedI installed Mandriva on /dev/sda5 and Fedora on /dev/sda3. Boot loader in the MBR is of Fedora12. It replaced the Mandriva bootloader that was there in the MBR. How can I boot Mandriva through Fedora's boot loader. The grub.conf file of my machine looks like this
Quote:
What modifications shall I make to the grub.conf?
First time on the forum, excuse me if i'm posting this in the wrong area. So with that being said, here's what goes on - right before it gets into the loader, it hangs right before it gets to it, where it says it's going to load it.
View 3 Replies View RelatedI got the grub loader to work finally. The problem is it does not always display at initial boot or a restart. I have seen the selection menu but it doesn't always appear. I have it set to point to windows so that my wife can hit enter when she gets a blank screen.
Below is the contents of my /etc/grub.conf file:
What I like is to install Fedora13,Win7,WinXp, and Musix. One HD 1.5TB Ilike on that is win7 and Fedora13,the other one with 400GB WinXP and Musix. What should I do so I can setup on GRUB. How can I set up like that.
View 2 Replies View RelatedAs I attempted to uninstall an MP3 decoder through the command line, I may have also uninstalled the boot loader to Fedora 13. I entered the command to uninstall the program as su - , left for a second, and upon my return I noticed a lot of things were being uninstalled. After canceling the process I turned of my computer and now when I try to start it, my computer freezes after the Fedora icon appears on the blue screen. After looking through the online manuals, I think I uninstalled the GRUB boot loader. I've been trying to reinstall it through the image on the DVD, but it keeps getting stuck on the blue screen. I use a Toshiba satellite with no partitions.
View 5 Replies View RelatedBrand new to Fedora. I installed F14, the 64 bit version today. Just wondering, during the install, there really wasn't a lot of options regarding which bootloader to use nor options (use a graphical or text mode).So... what bootloader did Fedora install on my system? Can I modify it? I'd like to get rid of that ugly blue-ish back ground among other things.
View 3 Replies View RelatedI just ran yum update, which installed about 47 packages. When I try to restart, the Linux boot loader is not being read. Apparently, the old Windows 7 boot loader that came installed on this machine is still somewhat intact on the hard drive, because when it boots, it tries to start Windows. I put in a Red Hat 5 rescue disk...but the rescue disk can't find a Linux file system on my hard drive.
Fedora 13
Dell Latitude E6500
Also...the disk is encrypted.
(Not the swap or /boot)
Have fedora 15 installed on my laptop with side off vista no problems, when i tried to install it on my desktop with windows 7 loader and ubuntu 11.04 i tried to install it but get to where to install it to, get message no room to install, how to install it on my desktop
View 2 Replies View RelatedI have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing
Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
I just installed Fedora 11 (I installed over the Fedora 10 installation I had already installed)..
-Before I would have Grub give the choice of Fedora 10 or Windows (Where Windows would load the Win Boot loader for my options of Windows 7 and Windows Vista)
-NOW: I have the same options.. But when i select Windows (It loads the Recovery partition) instead of the Windows Boot Loader...
Here is my fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 192 5414 41943040 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
code....
I know there's a way to do this, I've seen them in countless installation how-tos, but for the life of me I can't seem to make it work.On my personal machine I have win xp pro & fedora 11-kde dual booted on my #1 320gb hdd.I have win 7 enterprise on the #2 320gb hdd. I am a networking student and am currently taking Linux Admin I, class.For a class project on IT, I am trying to put together a ppt of how I accomplished setting up my machine and having slides of the grub loader screen,he win 7 boot loader screen would be a nice addition. But I can not get it to work. Have tried using the shift & prt scr keys to make a copy & then pasting it into a text editor on linux or wordpad in windows, but it doesn't take
View 2 Replies View RelatedI installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
View 7 Replies View RelatedI have a PC with 2 Hard drives one of which has Windows XP Pro installed. I installed Red Hat Linux 7.2 on the other drive choosing LILO as the boot loader. When I reboot LILO only displays Red Hat 7.2 When I boot Red Hat and go into KDE boot settings I can see that hda has Windows NT. hdb has Red Hat 7.2. I then tried to make the Windows NT partition the default entry. When I try to confirm this an error displays warning me of danger if I proceed. Is there any way to make LILO recognize Windows (preferably without having to reinstall Red Hat), perhaps by installing another bootloader application!
View 2 Replies View RelatedIn my system i am using fedora13 unfortunately grub loader(partition deleted) file has gone ,now its not booting the system,some one is saying is install again fedora in same place
what i am thinking is:
1)we will use live cd,
2)open terminal(in live command will work or not ,i typed but its asking you should be root)
3)we will take grub source code from net ,then we will compile it in same path(i think in fedora grub.8.gz),
then is it working
I had Fedora 12 and windwos 7 installed,today i reinstalled windows, and when i restart i dont get anymore the boot menu to choose between linux and windwos and i tried to reinstalled fedora but i am getting this error Grub Loader error 17,what can i do to solve this problem,i am new to linux
View 4 Replies View RelatedI have a Laptop ( Samsung R510 Driton (Aura Series) with Win XP installed, and wanted to install fedora 10, too, as i really want to test a few things in linux and get a little knowledge there....
I Installed fedora with his guide: [url]
And as for Dual boot i also read this guide: [url]
I created root, home, swap (8 gb), usr, var all in all about 100 gb (i know its much, but i have enough space :)
After the installation, fedora wanted to restart my laptop, i let it restart and GRUB came up, i chose "fedora 10" pressed enter and the laptop just restarted....did the same thign again, andn ow fedora was about 2 secs in the loading screen and then restarted again....i've chosen windows and the laptop isj ust restarting...i tried windows again and windows is loading ....but i dont get in fedora 10....
Here are the specification of my laptop:
Quote:
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
I have PC with following specs:
Intel E7500 CPU / Intel G31 Motherboard
Kingston 800MHz 2GB RAM
Hitachi 500 GB SATA HDD + Seagate 160 GB SATA HDD
I initially had only 500 GB HDD. I installed two installations of Windows 7 Ultimate - one 32-bit and one 64-bit installations. Both working fine.
Later on I installed the 160 GB HDD and installed Fedora 13 in it in a partition. The rest space of the 160GB I am using with Windows for storing data.
Now, the boot entries of both Windows installations are in the Grub Loader of F13. Means, if I remove the 160GB HDD, I cannot boot into my Windows installations.
Now I want to remove the 160 GB HDD and install a new 2TB hard-drive. That way, I cannot log into my Windows. And I do not want to lose the Linux installation also.
How can I remove the 160 GB HDD and install a new one without sacrificing my Windows installations?
OR...Is it possible that I can copy complete image of F13 on to the new HDD, so that things are same for the Windows installations?