Debian :: Remove Gnome Completely And Install Kde?
Sep 9, 2010i just installed debian with a net installation but it installed gnome now i want to completely remove gnome and install kde, how do i do this?
View 1 Repliesi just installed debian with a net installation but it installed gnome now i want to completely remove gnome and install kde, how do i do this?
View 1 RepliesI'm installing CentOS from the netinstall in Virtualbox now. I was about to post a different thread because Anaconda kept crashing on me. Whenever I would try to uncheck Gnome, clicking next would always fail. I really don't want Gnome, but I need to get the VM installed, so I just accepted the default software selection. (It's not an iso problem either because I originally tried the DVD as well.)I've been using Linux for several years, but I need to use a GUI-less server. I found some instructions on how to disable X by entering runlevel 3, but that's not what I want to do. Is there a meta-package that I can remove "yum remove" and it will remove all the GUI dependencies, or perhaps something like "yum groupremove"?
View 2 Replies View RelatedWhat I am trying to do is remove the title bar completely in gnome, it would be nice to be able to choose which applications had the bar and which did not, but I would be perfectly satisfied with just removing them from every window. I assume this is controlled by the window manager which would make it a metacity setting? Anyway, I have an 11in screen on my netbook and I cannot stand having such a big chunk of real estate wasted by such a useless feature, especially when I can perform all the window functions with keyboard shortcuts.
View 5 Replies View RelatedI installed Debian without desktop enviroment and then I aptitude installed fluxbox, everything worked fine, but I wanted to try LXDE so I purged fluxbox and installed LXDE.But my old computer is too slow now. I purged the LXDE, but it is still here and it didn`t remove as many packages as it installed them, I also removed lxde-core, but it continues to work.
How could I get back to non-desktop enviroment without reinstalling the whole system?
How can I remove completely flash player from iceweasel ?And so that it is also totally remove from Debian..Why flash player is not working..The only message I get is flash player is not responding.Did not give any other messages
View 9 Replies View RelatedI have Jessie 8.3, netinstall and GNOME base. I want to switch to MATE and my question is hot to do it correctly.
I think it is impossible to do it by installing firstly MATE and the GNOME - both desktops should be crashed.
How to remove completely GNOME to be without any desktop environment? I can go to thext mode and run commands to delete the desktop but there is something more that I should do?
I am trying to streamline a desktop install into a more streamlined server-esk install. I have edited the inittab to change the runlevel at startup to 3. How do I now remove KDE completely? Also are there any other large programs I need to uninstall?
View 3 Replies View RelatedI had Windows. Installed Linux 10.04 over it. I want to switch back to Windows. When I pop in my Windows XP disc I get and error after it loads a bunch of stuff. I tried booting from m 10.04 disc, going into Disk Utility and changing the file system to NTFS no luck. Tried burning another copy of XP and still same error. Now I burned a copy of Windows 7(desperate times call for desperate measures) but its on a DVD-R instead of a CD-R and every time I try to boot it, Linux just boots.
View 9 Replies View RelatedI'm running it on a Toshiba Satellite laptop.After getting the OS installed and configured evolution, I did a backup of the evolution on my desktop version of 10.04 and attempted to restore it to evolution on my laptop and while it did seem to work, it became corrupted and now won't load.
I uninstalled multiple times and reinstalled to get the same problem. I also removed a number of folders trying to get a clean install but ran into the same problem as soon as restored again.How can I completely remove evolution so that I can get a truly clean install where the wizard comes up for set up again once I open it for the first time?
My Keepass2 window is completely black in Gnome. Its possible to open my database and use autotype, but I cant edit anything coz its black. Everything works from KDE.
View 6 Replies View RelatedI have corrupted my /usr/ partition. I thought I recovered my server thingies okay. The problem is with gnome desktop. It won't show the login screen and furthermore there's a lot of error in ldconfig messages -- because of the corrupted /usr/ partition.I started picking out these erring files -- using aptitude purge and the rm command if it cannot be purged...That's how I tried to clean my /usr/ corrupted partition.How do I know I managed to cleanly removed all traces of the desktop gnome? -- also how could I install the desktop again.
View 3 Replies View RelatedOr would you have the option of a GNOME 2 session in addition to a GNOME 3 session? Do you think Ubuntu will to officially adopt GNOME 3 when it's released?
View 7 Replies View Relatedi'm trying to install my updates through install/remove software in gnome opensuse, but when I click apply everything just disappears, can I install them some other way?
View 5 Replies View Relatedi am interested how to remove mono from my Debian Squeeze Gnome.
View 14 Replies View RelatedI'm surprise that synaptic wants to remove gnome with tomboy, how can I avoid this disaster and remove only tomboy and other application i don't use.?
View 2 Replies View RelatedI've been carefully installing and personalizing a Debian 8 "Jessie" 64-bit install on my laptop for the last few days. Played some games, did some downloading and stuff and decided to want to run steam again, as I have done on many Ubuntu installs in the past.
So I followed this guide: [URL] ....
and of course, I read the warnings: Only do this on Jessie or SID, not on Wheezy. So I was in the clear. I thought.
After giving 'aptitude install steam' all hell broke loose. The script starting demolishing/removing almost everything under the KDE shell. Wireless network, apps, even the ability to reboot the system from the GUI were utterly and completely destroyed. After the script ended I had to reboot the system through an alternate CLI shell only to discover X was complete gone.
So I don't think there is anything else I can do now except re-installing the complete system? Bye bye Wesnoth saved games, downloads, etcetera...
I first installed opensuse KDE, the i use SuSE - LXDE.org to passs to LXDE, now i want to know if there's a way to completely remove KDE from my pc not tu use Yast and select one package for time.
View 9 Replies View RelatedI installed kde 4.4 from openSUSE 11.3 livecd. Now i want to remove it completely. What's the command to remove kde 4.4 completely without the xorg.
Code:
zypper remove ?
Fresh Squeeze install: I have AWN running and right now I have used gconf-editor to stop gnome-panel from being a part of the Gnome Sessions. I think it was in Desktop -> Sessions -> Default Settings..or something like that. Before I did this I was just clearing out the entries for the top panel, using Apps -> Panel -> and then it was top_panel or something like that. I'm at work so I cannot fully verify, after I deleted the bottom panel. This still allowed me to use ALT + F2 to bring up the run prompt.
Since removing gnome-panel from the session, I cannot use ALT + F2 anymore. If I were to put gnome-panel back, is there a way to keep the panels from recreating themselves after I remove them from within gconf-editor? If I leave gnome-session alone, whenever I reboot the top panel keeps coming back. I have everything I want running out of the AWN dock, so I want to remove the panels completely but still have the ability to launch the run prompt.
I am looking for an option to completely remove compiz.
I fired up synaptic and removed compiz completely.
Now i have just one problem.
Metacity is not fired up by default.
so i have desktop and winows also open but without borders. i.e without any desktop manager.
I know a workaround, i.e. to add metacity --replace in startup applications. but this is work around and not the actuall work. my system Ubuntu 9.10 x64
I have tried remove from ubuntu software center and Synaptic Package Manager, but when I reinstall Gwibber, it directly load from software list, and not download from internet. I want completely remove Gwibber, so if I want to reinstall Gwibber, my system download from internet and not install from database previous installation.
View 7 Replies View RelatedJust need my own repository for storage away from the laptop....still have the deb on hand just in case I want to reinstall....
Here is my issue. I installed dropbox and removed it. I noticed in the first start of dropbox it installs a daemon called dropboxd. Is dropboxd removed when you uninstall? I uninstalled and purged. I just want to make sure the daemon is gone as well. Trying to be as tidy as possible. Less code rolling around the better.
I need to reinstall both windows and ubuntu as dual boot. I tried to install windows 7 from the recovery partition but after windows starts the recovery and then does its first reboot it always loads to the grub prompt. I booted with ubuntu 10.10 live cd and wiped off all the partitions except the windows recovery partition and I tried sudo ms-sys -m /dev/sda3 which is supposed to restore the windows mbr but still when I reboot it just boots to the grub command prompt with windows only partially installed.
If I completely wiped off the old ubuntu partition and the windows partition then how can grub still be loading up? where is grub located? How to completely remove grub. I don't have a windows recovery cd, I only have the recovery partition which is still intact. I have tried to install ubuntu first and make an ntfs partition but when I try to install windows the recovery partition program says there is not enough space to install windows but there is 260gb.
i've found AWN to coever most and all of the panel's functionalities. how do i completely remove them from startup though?
View 1 Replies View RelatedI want to completly remove wine, so i figured that using the package manager, and apt-get remove will make it work. Using apt-get, i get the message that there is no wine installed, even though the package manager is telling me the opposite. After that i removed wine via the package manager, but i can still run wine. And that is the point where i am getting completly lost, how the hack can i run a removed program? I did compile and install wine myself once, so the problem might hide there. But how to i remove a program without the routines of the package manager?
I seriously need to deinstall wine completly to figure out a couple misterious problems i am having lately.
My emacs editor is messed up so I tried to remove it via synaptic. It gave me an error and exited. Is there any way to manually remove that data so I can freshly re-install my favorite editor?
View 5 Replies View RelatedI want to completely remove a service i.e ypserv from my red hat linux service list.that how can i completely remove a particular service from the service list
View 5 Replies View RelatedI made the mistake of trying to install a gnome based panel applet, which seemed for some reason installed the entire gnome desktop (games and bloatware too) whenever I try to remove the, Synaptic keeps threatening to install kde.
View 4 Replies View RelatedI've recently been tasked with setting up a couple linux servers and have run into an oddity. Using the default install for Wheezy to set up a basic LAMP stack, I have noticed after joining the computer to my windows AD domain, the Add/Remove Software application no longer prompts me for authentication and will not remove or add applications. I installed samba, winbind, and krb5 using apt-get from the root console following the procedure listed here. [URL] ....
View 2 Replies View RelatedI have a few Debian Squeeze installations which I perform upgrades on average on weekly basis. Last week one of my laptops, gave me this while all others did not, The following packages have unmet dependencies: gnome-desktop-environment: Depends: gnome-core (= 1:2.30+1) but 1:2.30+4 is to be installed. gnome: Depends: gnome-desktop-environment (= 1:2.30+4) but 1:2.30+1 is installed and it is kept back. The following actions will resolve these dependencies: Remove the following packages: 1) gnome Keep the following packages at their current version 2)gnome-accessibility [1:2.30+1 (now) 3) gnome-core [1:2.30+1 (now) Accept this solution? [Y/n/q/?] Has anyone encountered this? Is it safe to accept the proposal?
View 3 Replies View Related