Debian :: Making A Package From Orginal Wine Source?
Jan 23, 2011
i got a question about making a package from orginal wine source. I keep getting a error on the last part (will post the errro later in post )
What i do is this .
apt-get install devscripts cdbs dh-make
apt-get build-dep wine
cd to the directory
dh_make -n -b -s
[Code]...
When i remove the ati drivers it builds fine but with every build of wine to remove my ati drivers is not a option. I also asked on the wine forums but the told me to ask here . And the person also sayed it looks like you install the ati drivers from the one of the ati site but i installed them from the debian repos.
I'm building a debian source package to upload on my launchpad PPA. Does anyone know what file I should create or edit to make a menu entry for the app? Or a link to some *specific* doc? (The debian doc is quite overwhelming...)
After finally figuring out how exactly how to compile something from source, I did it with Wine. However, there's a problem, when I'm trying to play a game on Steam (Half-Life) on a TNT2 graphics card (With NVIDIA drivers 71.86 installed as well as all of the packages needed to compile Wine from source), everything either lags or has an error.
One of these errors is that OpenGL32 isn't being initialized after attempting to start the game in that mode. Another error (or I should say problem) is that in Direct3D mode, it just.. crashes lol. Also, in Software mode, it LAGS horribly and I don't think it has to do with the hardware limitations I have on this machine. I did however install the glx and gl drivers AFTER I compiled Wine, do I have to do yet another install?
Building Wine-1.3.16 for Squeeze from Source: Since there isn't a good version of Wine in the repositories, I decided to build my own from source. Here it is. read everything. I DID NOT have Wine previously installed. If you do, you'll have to remove it FIRST.
[code]...
With all the dependencies installed you can begin building Wine. From the terminal:
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
I want to compile geki2 from source. I tried apt-get source geki2but I getReading package lists... Done Building dependency tree Reading state information... Done E: Unable to find a source package for geki2I assume that /etc/apt/sources.list needs some additional entry. I run lenny.
Apart from that could someone explain to me what is the importance of files *.dsc , *.tar.gz and *.diff.gz in every package ? I assume *.tar.gz is the source. Is this independent from Debian ? I assume also that *.diff.gz is some patch you have to apply after you expand *.tar.gz in order to get a Debian specific version but how do you apply the patch ?
I have a project and would like to create a .deb package that brought on any computer with debian distribution installs it in your home user who is installing.I followed a guide and managed to create a deb package from my sources with FPM. But creates them with root permissions and tells me that I should create a script before installation to change the permissions.
why it is that when I download the sendmail debian source package for etch and build it using dpkg-buildpackage -b -nc I get a 645543 byte sendmail executable whereas when I download the sendmail binary that is 703292 bytes.
At first I thought it might be a free software thing but I went on the debian package search site and stable, sid, and experimental all have packages for wine. Why is there none for wheezy? Is it a temporary dependency thing or...? I've googled this but there has been no kind of answer anywhere. Right now I'm using the frickelplatz apotsid repository as they package the most recent version of wine but if I could use a standard debian repository I would.
Getting the error: Code: Select allThe required package keybinder was not found on your system. *** Please install keybinder (atleast version 0.2.2) or adjust *** the PKG_CONFIG_PATH environment variable if you *** installed the package in a nonstandard prefix so that *** pkg-config is able to find it.
I have installed everything available in the jessie repo with "keybinder" in the name. It seems like my path variable is configured correctly:
So, there are these source packages i downloaded, which i want to build with slightly different configure options due to a bug in debian: hfd5-serial and hdf5-openmpi cannot coexist, yet some packages require the serial version of the lib , others require the openmpi.
I downloaded the sources, in order to build them, without the hdf5 thing...
I have already built this from source in Scientific Linux, and i know this can be done without hdf5.
Where do i hack into the debian source tree of a package to remove a configure option...?
I've just been looking at a simple but well done flash based graphic on the bbc. [URL]..it is about supercomputing (btw, isn't it great to see that linux is uber alles in that area of computing). My question is simple: How would one make some interactive online graphic like this on linux using open-source tools? ideally, I would also like it to work on the client side using only open-source tools. I've heard a little about openlazlo, but I don't really know what it does.
while trying to get a game to work on wine I was surprised to find out that the wine version that ships with sid is 1.0.1 released in October 2005. So I installed the latest release I found at [URL] like this :
dpkg -i wine_1.1.42~winehq1-1_amd64.deb
The install failed, I think because I hadn't remove the old wine version, and that's when the joy-ride started. Impossible to remove wine to restart properly. (apt-get remove libwine wine and apt-get -f install didn't) After some googling I tried this :
This did install the wine version I wanted, and the game ran fine after that. However the result was a borked apt-get. Tried to remove wine again with the above commands, resulting in apt-get failing to do so because it tried installing wine-unstable and reported errors similar to these : E: Could not perform immediate configuration on 'wine-unstable'. see man 5 apt.conf under APT::Immediate-Configure for details. (2)
I registered here and got Ubuntu a couple days ago. After setting up and connecting to my wireless LAN I went on the internet and uploaded the WINE source. However, after about 5-10 seconds of staying on the internet it all of a sudden stopped working (the internet stopped its connectivity) that is. And I was still connected to the wireless LAN. I tried to reconnect like most people would do, and I was not able to connect again (Would prompt me for password continuously to no avail). There isn't a problem on my windows 7 (I'm able to connect to LAN/internet).
Just wondering if this is possible? Total n00b with linux, this is my *thinking* 3rd week using Ubuntu 9.10. And I am using my system for surfing the web, listen to music, video`s and chatting. And I got the "funny" tough`t of trying to maybe play World of Warcraft again on this computer. Yes I have run it before when I had XP and W7 on it. The w7 experience on this computer was a bad mistake. So yeah, the thing I am really wondering on is this: Wine, WoW with WoTLK ( Wrath of the Lich King ), with the newest Open Source ATI graphic driver?[URL].. According to that page (you have to Ctrl-F and "Open source ATI drivers" to find the what I mean ) it is possible, but I am wondering on how to do it?[URL].. and been reading on different sites that you can play games with wine in a new X. Curious on how that can be done, and if that MAYBE is the best thing to do with my Wow game. Havent installed it YET, thinking of downloading the web installer after this post. If the moderators should find this is the wrong place for this to be asked, move it to the "Wine" section, if its better placed there.
I am trying to compile C source file to generate .trb file (turbo file) which will then burn on trubo sim using TP2. When I comiple the code following error is occuring. before going through belwo error I was getting error 'Unknown MCU atmega128', known MCU are: (list appread), then I change the configuration and set the MCU to supported list then following error is occuring.
Is there a guide on creating a package from PHP scripts or something? Example: if I've developed a system and I want to make it to a deb file to deploy to my friends and such. I've tried looking for one but I have not been lucky so far.
I have just installed ..src.rpm package. How do I uninstall it ? It's confusing to me because src and binary package share the same name ? (at least "rpm -qa" doesn't show any new src packages)
Makefile.in a file that is generated by tool, why it is in the source package? I am asking since , when I modified Makefile.am, I need to run automake to update the makefile.in, while I don't think this should be done manually.
I was a die hard Ubuntu user for the last 2 years and decided to use something more advanced or different. My question (after searching the crap out of Google) is how can I view the source code of Fedora? I have found many sites explaining this but it is not written in terms that are easy for me to understand. I haven't been programming for years and using advanced features in Linux so most of these sites are not explaining out and most are explaining how to build and add on to the kernel.
I am trying to install an iso reader but no matter which package I choose they all return this error:The action would require the installation of packages from unauthenticated sources.These are all packages in the Ubuntu Software centre .
Kubuntu ships by default with a crippled K3b that won't rip DVDs to video files. Therefore I followed the instructions here to install it from source against libdvdread-dev. Now KPackageKit is continuously bugging me about 5 updates: k3b, k3b-dbg, libk3b-dev, libk3b6, and libk3b6-extracodecs. If I let those be "updated," I just get the binary versions of the same versions, without DVD ripping capabilities. Is there a way to get DVD ripping in k3b without APT continuously wanting to "update," it away?
why status of fedora-source is 0, dose this means there's no available packages in this repo? kernel-headers and kernel-devel have been installed, how can i install the kernel-source package?
